Alternating copolymerization of 1- and 2-vinylnaphthalene with methyl methacrylate by using diethylaluminum chloride

The alternating copolymerization of 1- and 2-vinylnaphthalene (1-VNap and 2-VNap) with methyl methacrylate (MMA) by using diethylaluminum chloride (Et₂AlCl) in toluene at 0°C has been studied. No polymerization could occur without Et₂AlCl, and alternating copolymers were obtained only when an equimolar amount of Et₂AlCl with MMA was supplied. Through ¹H-NMR analyses on both dyad and triad of alternating deuterated 1- and 2-α-d-VNap–MMA copolymers, each configuration could be described successfully by a single parameter, coisotacticity σ, whose value was estimated as 0.41 for the former and 0.56 for the latter copolymer, respectively. A rather low coisotacticity of copoly(1-VNap–MMA) was explained in the terms of steric effect (peri effect) of 1-VNap monomer.     

Bromination by means of sodium monobromoisocyanurate (SMBI)

A variety of aromatic compounds with both activating and deactivating substituents were brominated with sodium monobromoisocyanurate (SMBI) 1, diethyl ether, diethyl ether-methanesulfonic acid, trifluoroacetic acid, or sulfuric acid were employed as solvents. Thus nitrobenzene was conveniently brominated in sulfuric acid, benzene was readily monobrominated in diethyl ether-methanesulfonic acid, and phenol was selectively brominated at the ortho position under mild conditions in refluxing diethyl ether. With substituents that are easily protonated, trifluoroacetic acid may be employed as solvent in the reaction with 1, in contrast NBS was ineffective in trifluoroacetic acid. This renders 1 a superior reagent relative to NBS. In addition to aromatics, alkenes, ketones and esters were also brominated with 1. Diethyl malonate was brominated with 1 and then subjected to a Bingel reaction with NaH to afford the desired methanofullerene in reasonable yield.     

Efficient synthesis of (±)-8,14-cedranoxide using electrochemical method as a key step

(±)-8,14-Cedranoxide has been synthesized starting from 3,4-dimethoxyphenol, wherein 6-acetoxymethyl-2,6-dimethyl-9-methoxytricyclo[5.3.1.0^1,5]undec-9-en-8,11-dione as a key intermediate has been produced efficiently by means of electrochemical methods.     

New alkaline earth aluminum hydride with one-dimensional zigzag chains of [AlH6]: synthesis and crystal structure of BaAlH5

The title hydride and its deuteride were successfully synthesized. The crystal structure of the deuteride was determined by time-of-flight neutron powder diffraction. BaAlD(5) crystallizes with a new orthorhombic structure in space group Pna2(1) (No. 33), cell parameters a = 9.194(1) A, b = 7.0403(9) A, and c = 5.1061(6) A, Z = 4. BaAlH(5) is the first example that contains one-dimensional zigzag chains of [AlH(6)] along the crystallographic c axis.     

Application of europium(III) extraction with organophosphinic acid to liquid membrane transport

The extraction behavior of Eu(III) has been studied using di(2,4,4-trimethylpentyl)phosphinic acid (DTMPPA, HA) in kerosene. Europium was extracted as Eu(HA₂)₃ with the extraction constant of 2.0·10^–3. This extraction system was applied to the transport of Eu(III) across a DTMPPA liquid membrane supported on porous polytetrafluoroethylene. Europium was quantitatively moved through the liquid membrane containing 0.1M (HA)₂ as a mobile carrier from the feed solution of pH above 3 into the product solution of 0.1M HNO₃, yielding a concentration factor of ten. The transport rate increased with increasing pH and DTMPPA concentration.     

Effects of ligands on the “living” radical polymerization initiated by the aged Cr2+ plus benzoyl peroxide system

The “living” radical polymerization of methyl methacrylate with the aged Cr²⁺ plus benzoyl peroxide (BPO) system in the presence of various amines as ligand has been studied in N,N′-dimethylformamide. Aliphatic amines such as ethylenediamine diminished the rate of polymerization, while dipyridyl (dipy) and o-phenanthroline (phen) accelerated the polymerization rate as follows: phen > dipy > pyridine ? none. Specifically, the rate of polymerization in the presence of phen had a maximum value at [phen]/[Cr²⁺] = 0.5. The retardation of polymerization by aliphatic amines was explained by the interaction of BPO with free and coordinated amines. The latter result may support the mechanism involving the complexed radical proposed for the living radical polymerization with the aged Cr²⁺ + BPO system. In the presence of phen the effects of aging period and aging temperature as well as polymerization temperature were studied and the nature of complexed radicals is discussed.     

Photoinduced Molecular Transformations. Part 142. One-step syntheses of 1H-benz[f]indole-4,9-diones and 1H-indole-4,7-diones by a new regioselective photoaddition of 2-amino-1,4-naphthoquinones and 2-amino-1,4-benzoquinones with alkenes

The 2,3-dihydro-1H-benz[f]indole-4,9-diones 3a–d , h were formed in a one-step reaction in 13–82% yield by an unprecedented [3 + 2] regioselective photoaddition of 2-amino-1,4-naphthoquinone ( 1 ) with various electronrich alkenes 2 (Scheme 1, Table). The [3 + 2] photoadducts derived from 1 with vinyl ethers and vinyl acetate gave 1H-benz[f]indole-4,9-diones 4e , f , i , in 33–72% yield, by spontaneous loss of the corresponding alcohol or AcOH from the resulting adducts; 4i has a kinamycin skeleton. The [3 + 2] photoaddition also took place on irradiation of the differently substituted amino-1,4-benzoquinones 6 , 7 , and 12 and excess alkenes 2 in benzene, giving 1H-indole-4,7-dione derivatives 13 and 14 (Scheme 3), 15a and 16 (Scheme 4), and 18 (Scheme 4), respectively. The initial products in these photoadditions were proved to be hydroquinones, the air oxidation of which yielded the heterocyclic quinones; 2,3-dihydro-2-methoxy-2-methyl-5-phenyl-1H-indole-1,4,7-triyl triacetate ( 19 ) was isolated after treatment of the crude photoaddition mixture obtained from 2-amino-5-phenyl-1,4-benzoquinone ( 7 ) and 2-methoxyprop-1-ene ( 2f ) with Ac₂O and pyridine under N₂. A pathway leading to the annelated hydroquinones involving ionic intermediates arising from an electron transfer in these photoadditions is proposed (Scheme 5).     

Isolation of heptadepsin, a novel bacterial cyclic depsipeptide that inhibits lipopolysaccharide activity

Lipopolysaccharide (LPS) is considered to cause various inflammatory reactions. We searched among microbial secondary metabolites for compounds that could inhibit LPS-stimulated adhesion between human umbilical vein endothelial cells (HUVEC) and human myelocytic cell line HL-60 cells. In the course of our screening, we isolated a novel cyclic depsipeptide, which we named heptadepsin, from the whole culture broth of Paenibacillus sp. The addition of heptadepsin prior to LPS stimulation decreased HL-60 cell-HUVEC adhesion without showing any cytotoxicity. It also inhibited the cellular adhesion induced by lipid A, the active component of LPS, but it did not inhibit TNF-alpha or IL-1beta-induced cell adhesion. The result of surface plasmon resonance (SPR) analysis revealed that heptadepsin interacted with lipid A directly. Thus, heptadepsin, a novel naturally occurring cyclic heptadepsipeptide, was shown to inactivate LPS by direct interaction with LPS.     

The role of the solvent in equilibrium and kinetic aspects of metal chelate extractions

Equilibria and kinetics for the extraction of nickel(II) and copper(II) by 2-hydroxy-5-nonylbenzophenone oxime (LIX 65N) in seven organic solvent systems were studied in order to test the validity of several hypotheses related to the role of the solvent in equilibrium and kinetic aspects of metal chelate extraction. For the nickel—LIX 65N system, the extraction constant is essentially independent of the solvent system, whereas for the copper—LIX 65N system, the extraction constant is not independent of solvent; this indicates that while the stoichiometry of the nickel chelate remains the same in all solvents, that of copper does not. The observed rate constant for the nickel—LIX 65N extraction was found to vary inversely with the LIX 65N distribution constant as predicted from a mechanism involving slow formation of the 1:1 complex. The observed reaction rate constant for the copper—LIX 65N varied inversely with the square of the distribution constant, also in accordance with the previously postulated mechanism of the slow formation of the 2:1 copper complex. This study, therefore, unequivocally eliminates the interfacial mechanism in favor of the homogeneous chemical reaction mechanism for the extraction of metal ions by LIX 65N, as well as by other similar high-molecular-weight extractants.     

Improved spectrophotometric determination of uranium(VI) with 4-(2-pyridylazo)resorcinol in the presence of benzyldimethylstearyltrimethylammonium chloride

An improved spectrophotometric determination of uranium(VI) is proposed using 4-(2-pyridylazo)resorcinol(PAR) in the presence of benzyldimethylstearyltrimethylammonium chloride(BSTAC) as a cationic surfactant. The calibration graph is linear in the range of 0.3-60 microg/10 ml uranium(VI), measuring the absorbance at 550 nm. The reproducibility for 19.0 microg/10 ml uranium(VI) is 0.57%. The third-derivative method using the third-derivative distance (d(3)A/dlambda(3)) among lambda(1) 530 nm, lambda(3) 594 nm and lambda(2) 565 nm was also investigated.