Evaluation of the evaporation behavior of Pd, Mo, Te, and Sb in simulated low level radioactive liquid waste

To sophisticate the nuclear fuel recycling processes, the transfer percentages for Pd, Mo, Te, and Sb should be determined. Each element solution containing NaNO₃ or HNO₃ was fed consistently into the thin film evaporator regulated in vac and at 50 °C. The analyte percentages in the inside of the lid, in the condenser, and in the distillate were 10^-1%/m², 10^-3%/m², and 10^-3% (DF = 10⁵), respectively. The Mo percentage in the condenser was lower by a factor of 10 than those of other elements investigated. The NO₃ ^- percentages were nearly constant despite increasing HNO₃ concentrations, however, the ratios decreased with increasing NaNO₃ concentrations.     

Electrolytic synthesis of ammonia in molten salts under atmospheric pressure

Ammonia was successfully synthesized by using a new electrochemical reaction with high current efficiency at atmospheric pressure and at lower temperatures than the Haber-Bosch process. In this method, nitride ion (N3-), which is produced by the reduction from nitrogen gas at the cathode, is anodically oxidized and reacts with hydrogen to produce ammonia at the anode.     

Synthesis and Characterization of α,ω‐Heterofunctional Poly(ethylene oxide) Macromonomers

A novel α,ω‐heterofunctional poly(ethylene oxide) (PEO) macromonomer possessing methacryloyl and thienyl end groups was prepared by ring‐opening polymerization of ethylene oxide initiated by potassium thienylethoxide and termination of the living PEO ends with methacryloyl chloride. Incorporation of methacryloyl and thienyl groups was confirmed by free‐radical and oxidative polymerization processes, respectively, and by means of ¹H NMR analysis.

     

NMR analysis of lignins in CAD-deficient plants. Part 1. Incorporation of hydroxycinnamaldehydes and hydroxybenzaldehydes into lignins

Peroxidase/H2O2-mediated radical coupling of 4-hydroxycinnamaldehydes produces 8-O-4-, 8-5-, and 8-8-coupled dehydrodimers as has been documented earlier, as well as the 5-5-coupled dehydrodimer. The 8-5-dehydrodimer is however produced kinetically in its cyclic phenylcoumaran form at neutral pH. Synthetic polymers produced from mixtures of hydroxycinnamaldehydes and normal monolignols provide the next level of complexity. Spectral data from dimers, oligomers, and synthetic polymers have allowed a more substantive assignment of aldehyde components in lignins isolated from a CAD-deficient pine mutant and an antisense-CAD-downregulated transgenic tobacco. CAD-deficient pine lignin shows enhanced levels of the typical benzaldehyde and cinnamaldehyde end-groups, along with evidence for two types of 8-O-4-coupled coniferaldehyde units. The CAD-downregulated tobacco also has higher levels of hydroxycinnamaldehyde and hydroxybenzaldehyde (mainly syringaldehyde) incorporation, but the analogous two types of 8-O-4-coupled products are the dominant features. 8-8-Coupled units are also clearly evident. There is clear evidence for coupling of hydroxycinnamaldehydes to each other and then incorporation into the lignin, as well as for the incorporation of hydroxycinnamaldehyde monomers into the growing lignin polymer. Coniferaldehyde and sinapaldehyde (as well as vanillin and syringaldehyde) co-polymerize with the traditional monolignols into lignins and do so at enhanced levels when CAD-deficiency has an impact on the normal monolignol production. The implication is that, particularly in angiosperms, the aldehydes behave like the traditional monolignols and should probably be regarded as authentic lignin monomers in normal and CAD-deficient plants.     

Comprehensive characterisation of the E phase of 6-octyl-2-phenylazulene

Molecular dynamics in the soft crystal, E phase of 6-octyl-2-phenylazulene was studied by X-ray diffraction, and dielectric and Fourier transform infrared spectroscopies. Clear dielectric dispersion is observed due to the head-to-tail disordering in a kHz range around 400 K. The CH stretching frequencies exhibit more pronounced shifts at the phase transition point from the high-temperature ordered crystal to the E phase than that at the melting from the E phase to the isotropic liquid. The results are discussed in comparison with a typical E series, 4-n-alkyl-4′-isothiocyanatobiphenyl (n being the number of carbon atoms in the alkyl group).     

Theoretical study on singlet oxygen adsorption onto surface of graphene-like aromatic hydrocarbon molecules

Recently, graphene sheet is one of interesting systems to realize novel electronic properties. Especially, interaction between graphene and adsorbed oxygen molecule is very important to control electronic condition. In this paper, we employed some aromatic hydrocarbons as simple systems of graphene sheet and ab initio MO calculations were carried out to investigate inter-molecular interaction. It is found that not triplet but singlet O₂ molecule have potential of chemisorption onto graphene surface. From the calculated potential energy surface (PES) for distance between benzene and O₂ molecules, meta-stable structure is found at about 1.5 Å with potential barrier. In the optimized structure of its meta-stable state, structural strain can be relaxed through bending of planer benzene ring. Its energy is estimated at 70.10 kcal/mol for benzene. We also estimated the strain effects for naphthalene and pyrene molecules as larger case of graphene and they were 80.85 and 72.45 kcal/mol, respectively.     

Factors that regulate the conformation of m-benziporphodimethene complexes: agostic metal-arene interaction, hydrogen bonding, and η2,π coordination

Group 12 and silver(I) tetramethyl‐m‐benziporphodimethene (TMBPDM) complexes with phenyl, methylbenzoate, or nitrophenyl groups as meso substituents were synthesized and fully characterized. The dimeric silver(I) complex displays an unusual η²,π coordination from the β‐pyrrolic C?C bond to the silver ion. All of the complexes displayed a close contact between the metal ion and the inner C(22)? H(22) on the m‐phenylene ring. The downfield chemical shifts of H(22) and large coupling constants between Cd^II and H(22) strongly support the presence of an agostic interaction between the metal ion and inner C(22)–H(22). Crystal structures revealed that the syn form is the predominant conformation for TMBPDM complexes. This is distinctively different from the exclusive anti conformation observed in m‐benziporphyrin and tetraphenyl‐m‐benziporphodimethene (TPBPDM) complexes. Evidently, intramolecular hydrogen‐bonding interactions between axial chloride and methyl groups stabilize syn conformations. Unlike the merely syn conformation observed in the solid‐state structures of TMBPDM complexes that contain an axial chloride, in solution these complexes display highly solvent‐ and temperature‐dependent syn/anti ratio changes. The observation of dynamic ¹H NMR spectroscopic scrambling between syn and anti conformations from the titration of chloride ion into the solution of the TMBPDM complex suggests that axial ligand exchange is a likely pathway for the conversion between syn and anti forms. Theoretical calculations revealed that intermolecular hydrogen‐bonding interactions between the axial chloride and CHCl₃ stabilizes the anti conformation, which explains the increased ratio for the anti form when dichloromethane or chloroform was used as the solvent.     

Identification of Shiga toxins in Shiga toxin-producing Escherichia coli using immunoprecipitation and high-performance liquid chromatography-electrospray ionization mass spectrometry

We developed a rapid and reliable identification method for Shiga toxins in Shiga toxin-producing Escherichia coli (STEC) using immunoprecipitation and high-performance liquid chromatography-electrospray ionization mass spectrometry (HPLC-ESI-MS). Polyclonal antisera specific for Shiga toxin 1 (Stx1) and Shiga toxin 2 (Stx2) were raised in rabbits so as to be used for the immunoprecipitation. The immunoprecipitaion was carried out by mixing sample solutions with 50 microl each of the antisera to Stx1 and Stx2 followed by allowing the mixed solutions to stand for 30 min. The quantity required to obtain the immunoprecipitate was more than 0.5 microg of Shiga toxins. HPLC-ESI-MS analysis of the resulting immunoprecipitates provided accurate molecular weight information on Shiga toxins, leading to direct evidence for the presence of these toxins. It requires at most two days to perform our procedure from toxin extraction to measurement of HPLC-ESI-MS whereas the previous method using isolation procedures required about two weeks to complete. The usefulness of the present method has been demonstrated by identifying Stx1, Stx2 and a variant of Stx2 (Stx2e) in the immunoprecipitates prepared from STEC strains.     

Palladium complexes bearing an N‐heterocyclic carbene–sulfonamide ligand for cooligomerization of ethylene and polar monomers

Herein, we report the synthesis of palladium complexes bearing an N‐heterocyclic carbene (NHC)‐sulfonamide bidentate ligand and their application in ethylene oligomerization and ethylene/polar monomer cooligomerization. These catalysts could smoothly catalyze ethylene oligomerization and ethylene/methyl acrylate cooligomerization albeit the performance was lower compared to that of a NHC–phenoxide catalyst. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 474–477