MOF‐on‐MOF: Oriented Growth of Multiple Layered Thin Films of Metal–Organic Frameworks

The precise alignment of multiple layers of metal–organic framework (MOF) thin films, or MOF‐on‐MOF films, over macroscopic length scales is presented. The MOF‐on‐MOF films are fabricated by epitaxially matching the interface. The first MOF layer (Cu₂(BPDC)₂, BPDC=biphenyl‐4,4′‐dicarboxylate) is grown on an oriented Cu(OH)₂ film by a “one‐pot” approach. Aligned second (Cu₂(BDC)₂, BDC=benzene 1,4‐dicarboxylate, or Cu₂(BPYDC)₂, BPYDC=2,2′‐bipyridine‐5,5′‐dicarboxylate) MOF layers can be deposited using liquid‐phase epitaxy. The co‐orientation of the MOF films is confirmed by X‐ray diffraction. Importantly, our strategy allows for the synthesis of aligned MOF films, for example, Cu₂(BPYDC)₂, that cannot be grown on a Cu(OH)₂ surface. We show that aligned MOF films furnished with Ag nanoparticles show a unique anisotropic plasmon resonance. Our MOF‐on‐MOF approach expands the chemistry of heteroepitaxially oriented MOF films and provides a new toolbox for multifunctional porous coatings.     

Synthesis and Magnetic Properties of (Pyrrolidin‐1‐oxyl)–(Nitronyl Nitroxide)/(Iminonitroxide)‐Dyads

Unlike extensively studied diradicals linked by π‐conjugated systems, only a few studies have investigated weakly coupled diradicals linked by an sp³ carbon atom. Herein, we prepared pyrrolidin‐1‐oxyl–(nitronyl nitroxide)‐dyad 5 and pyrrolidin‐1‐oxyl–iminonitroxide‐dyad 6 . From the observed temperature dependence of the magnetic susceptibility, 5 and 6 were determined to be in singlet ground states with 2J_intra/k_B=?35.2 K and ?13.6 K, respectively. From these results and theoretical calculations of related diradicals, the spin‐polarization model counting the small spin density of the sp³ carbon atom could be used as a spin‐prediction model.     

Fluorescence studies on phenylene moieties embedded in a framework of periodic mesoporous organosilica

The excited state characteristics of phenylene (Ph)-bridged periodic mesoporous organosilica (PMO) powders with crystal-like and amorphous wall structures are investigated. Crystal-like Ph-PMO has a molecular ordering of the bridging organic moieties with intervals of 0.76 and 0.44 nm parallel and perpendicular to the mesochannel direction, respectively, whereas amorphous Ph-PMO has no molecular-level periodicity in the wall. Fluorescence from the exciton and excimer of the Ph moieties and the defect center in the silicate network were detected at room temperature, but fluorescence from the excimer and the defect center were not detected at 77 K for crystal-like Ph-PMO dispersed in a methanol/ethanol mixed solvent. The decay curve of the exciton fluorescence of crystal-like Ph-PMO at room temperature was analyzed successfully using a one-dimensional diffusion model quenched by the defect center and the excimer site. The results were discussed in comparison with those for the crystal-like biphenylene-bridged PMO reported in the preceding paper (Yamanaka et al., Phys. Chem. Chem. Phys., 2010, 12, 11688-11696). The existence of excited states with various conformations including ground state dimers or aggregates of the Ph moieties was suggested for amorphous Ph-PMO. It was clearly apparent that the differences in the excited state dynamics reflected the differences in the molecular-level structure in the wall.     

Highly oriented growth of titanate nanotubes (TNTs) in micro and confinement spaces on sol–gel derived amorphous TiO2 thin films under moderate hydrothermal condition

Synthesis of titanate nanotubes (TNTs) from sol–gel derived amorphous TiO₂ thin films under moderate hydrothermal condition has been reported. TNTs from film possess a tubular morphology that is the same crystalline phase as one synthesized from TiO₂ powder so far. TNTs obtained in this study are not entangled one another but oriented and isolated on the substrate. Growth of highly oriented TNTs is observed in micro grooves of amorphous TiO₂ thin film. Their orientation is also maintained with the growth of TNTs.     

Chemical Stimulus‐responsive Folding and Unfolding of a Dendrimeric Assembly

A dendrimeric trimer undergoes folding and unfolding in response to a chemical stimulus. The trimer of interest contains a central dendrimer with a butadiyne‐linked zinc porphyrin dimer ((ZnP)₂) core, in addition to two terminal dendrimers with zinc porphyrin (ZnP) cores. The obtained absorption spectra indicate that the unfolded form is the exclusive conformer in chloroform, while the addition of 1,4‐diazabicyclo[2.2.2]octane (DABCO) in chloroform leads to transformation from the unfolded to the folded structure containing two DABCO units per trimer; the folded structure originates from the cross‐linking of (ZnP)₂ and ZnP with DABCO. Moreover, the addition of excess DABCO promotes the generation of the unfolded structure containing four DABCO units.     

Oxygenation of alkyl sulfides with ferrous perchlorate/ascorbic acid/oxygen system

In the oxidation of alkyl sulfides bearing acidic α-hydrogens eiher with phenobarbital induced rabbit liver microsomal cytochrome P-450, or with the Udenfriend's model system (ferous perchlorate/ascorbic acid/oxygen system), both S-dealkylation and S-monoxygenation took place concurrently. Meanwhile, in the oxidation of simple alkyl sulfides, steeoselective S-monooxygenation was found of occur predominantly.     

Hydrolysis of DNA by cerium(IV)/EDTA complex

Homogeneous solutions are formed from equimolar amounts of Ce(NH₄)₂(NO₃)₆ and EDTA. These solutions hydrolyze single-stranded DNA far more efficiently than double-stranded DNA. In contrast, Ce(IV) hydroxide gel, obtained in the absence of EDTA, hydrolyzes both single-stranded and double-stranded DNAs at almost the same rates. In order to achieve this substrate-specificity sufficiently, the mole ratio of EDTA to Ce(NH₄)₂(NO₃)₆ must be 1.0 or greater. By using this remarkable specificity of Ce(IV)/EDTA complex, gap-site in substrate DNA is selectively hydrolyzed. The scission-site is modulated by use of appropriate combination of oligonucleotide additives. The reactions have been kinetically analyzed.     

Homoleptic cyclometalated iridium complexes with highly efficient red phosphorescence and application to organic light-emitting diode

Phosphorescence studies of a series of facial homoleptic cyclometalated iridium(III) complexes have been carried out. The complexes studied have the general structure Ir(III)(C-N)(3), where (C-N) is a monoanionic cyclometalating ligand: 2-(5-methylthiophen-2-yl)pyridinato, 2-(thiophen-2-yl)-5-trifluoromethylpyridinato, 2,5-di(thiophen-2-yl)pyridinato, 2,5-di(5-methylthiophen-2-yl)pyridinato, 2-(benzo[b]thiophen-2-yl)pyridinato, 2-(9,9-dimethyl-9H-fluoren-2-yl)pyridinato, 1-phenylisoquinolinato, 1-(thiophen-2-yl)isoquinolinato, or 1-(9,9-dimethyl-9H-fluoren-2-yl)isoquinolinato. Luminescence properties of all the complexes at 298 K in toluene are as follows: quantum yields of phosphorescence Phi(p) = 0.08-0.29, emission peaks lambda(max) = 558-652 nm, and emission lifetimes tau = 0.74-4.7 micros. Bathochromic shifts of the Ir(thpy)(3) family [the complexes with 2-(thiophen-2-yl)pyridine derivatives] are observed by introducing appropriate substituents, e.g., methyl, trifluoromethyl, or thiophen-2-yl. However, Phi(p) of the red emissive complexes (lambda(max) > 600 nm) becomes small, caused by a significant decrease of the radiative rate constant, k(r). In contrast, the complexes with the 1-arylisoquinoline ligands are found to have marked red shifts of lambda(max) and very high Phi(p) (0.19-0.26). These complexes are found to possess dominantly (3)MLCT (metal-to-ligand charge transfer) excited states and have k(r) values approximately 1 order of magnitude larger than those of the Ir(thpy)(3) family. An organic light-emitting diode (OLED) device that uses Ir(1-phenylisoquinolinato)(3) as a phosphorescent dopant produces very high efficiency (external quantum efficiency eta(ex) = 10.3% and power efficiency 8.0 lm/W at 100 cd/m(2)) and pure-red emission with 1931 CIE (Commission Internationale de L'Eclairage) chromaticity coordinates (x = 0.68, y = 0.32).     

Synthesis of directly linked zinc(II) porphyrin-imide dyads and energy gap dependence of intramolecular electron transfer reactions

A series of zinc(II) porphyrin-imide dyads (ZP-Im), in which an electron donating ZP moiety is directly connected to an electron accepting imide moiety in the meso position, have been prepared for the examination of energy gap dependence of intramolecular electron transfer reactions with large electronic coupling. The nearly perpendicular conformation of the imide moiety towards the porphyrin plane has been revealed by Xray crystal structures. The energy gap for charge separation, 1ZP* - Im --> ZP+ - Im-, is varied by changing the electron accepting imide moiety to cover a range of about 0.8 eV in DMF. Definitive evidence for electron transfer has been obtained in three solvents (toluene, THF, and DMF) through picosecond-femtosecond transient absorption studies, which have allowed us to determine the rates of photoinduced charge separation, 1ZP* - Im --> ZP+ - Im-, and subsequent thermal charge recombination ZP+ - Im- --> ZP - Im. The free-energy gap dependence (energy gap law) has been probed from the normal to the nearly top region for the charge separation rate alone, and only the inverted region for the charge recombination rate. Although both of the energy gap dependencies can be approximately reproduced by means of the simplified semiclassical equation, when we take into consideration the effect of the high frequency vibrations replaced by one mode of averaged frequency, many features, including the effects of solvent polarity and the electron tunneling matrix element on the energy gap law, differ considerably from those of the previously studied porphyrin-quinone systems, which have weaker interchromophore electronic interactions.     

Isolation of xylose reductase gene ofPichia stipitis and its expression inSaccharomyces cerevisiae

Applied Biochemistry and Biotechnology - A NADPH/NADH-dependent xylose reductase gene was isolated from the xylose-assimilating yeast,Pichia stipitis. DNA sequence analysis showed that the gene...