Substoichiometric isotope-dilution determination of sulphur after conversion to methylene blue and ion-pair extraction with dodecyl sulphate

The proposed substoichiometric determination of sulphur includes two key steps: conversion of sulphur to methylene blue and ion-pair extraction of methylene blue into chloroform with a substoichiometric amount of dodecyl sulphate. The method, combined with isotope dilution is applied to the determination of total sulphur in NBS SRM Citrus Leaves and in a seaweed sample (Laminaria religiosa Miyabe). The mean values obtained were 0.401±0.008% S (RSD 2%; n=9; certified value 0.407±0.009%) for the SRM, and 0.756±0.012% S (RSD 1.6%; n=5) for the seaweed. A sample of 0.5–1 g containing ca. 100 μg of sulphur can be analysed.     

Extraction equilibrium of palladium(II) with 2-methyl-8-quinolinol into supercritical carbon dioxide fluid

The present study is concerned with the extraction behavior and equilibrium of Pd(II) with 2-methyl-8-quinolinol (HMQ) into supercritical fluid CO(2) (SF-CO(2)). Pd(II)-HMQ complex extracted from a weakly acidic solution (pH 2-3) into SF-CO(2) was determined to be Pd(MQ)(2) on the basis of a slope analysis. The extraction constant K(ex,SF) (=[Pd(MQ)(2)](SF)[H(+)](2)[Cl(-)](4)[PdCl(4)(2-)](-1)[HMQ](-2)) was determined to be 10(4.3+/-0.2) at 8.5 MPa, 45 degrees C and I=0.4 M (H,Na)Cl (1 M=1 mol dm(-3)). The distribution behavior of HMQ between an aqueous and a SF-CO(2) phase was examined so as to discuss quantitatively the extraction equilibrium. The extraction constant (K(ex,Cy)) of Pd(II) with HMQ into cyclohexane with a similar polarity to SF-CO(2) was determined and the K(ex,SF) was compared with the K(ex,Cy). Pd(II) at the concentration range of 10(-5)-10(-4) M in the aqueous solution (pH<3) containing relatively high concentration of chloride ion was found to be extracted efficiently by the SF-CO(2) extraction.     

Synthesis and properties of bowl‐shaped homotriazacalix[3 and 6] arenes and the acyclic analogues

Bowl‐shaped chiral homotriazacalixarenes were prepared by the cyclization reactions of chiral triamines with three equimolar amounts of bis(chloromethyl) phenols or bis(chloromethyl) phenol‐formaldehyde dimers in moderate yields. The corresponding acyclic phenol‐formaldehyde oligomers were also synthesized. The structural analysis of the macrocycles by nmr and circular dichroism spectra imply the existence of chiral transmission from the point chirality of the cysteine bridge to the cyclophane moiety. Their cyclic and acyclic compounds have a π‐base cavity large enough to include the ammonium ion.     

Synthesis and central nervous system stimulant activity of 5,8-methanoquinazolines fused with imidazole,thiadiazole, pyrimidine and 1,3,5-triazine

5,8-Methanoquinazolines fused with imidazoles 4a-4b , thiadiazoles 5–6 , pyrimidines 7, 9, 11 and 12 , and 1,3,5-triazine 13 were prepared starting from (5R,8S)-2-amino-8,9,9-trimethyl-5,6,7,8-tetrahydro-5,8-methanoquinazoline 3 . Most compounds possessed central nervous system stimulant activities.     

A stable silicon congener of highly strained bicyclo[3.2.0]hepta-1,3,6-triene

A silicon-containing fused bicyclic compound with a highly strained bridgehead double bond, 2,3,6,7-tetra-tert-butyl-4-(tert-butyldimethylsilyl)-5-(tert-butyldimethylsiloxy)-5-silabicyclo[3.2.0]hepta-1,3,6-triene (2), was synthesized quantitatively by the reaction of 1,2-bis-tert-butyl-4,4-bis(tert-butyldimethylsilyl)-4-silatriafulvene (3) with di-tert-butylcyclopropenone (4) at 80 degrees C. An X-ray crystallographic analysis for 2 not only confirmed a bicyclic structure having a silacyclopentadiene (silole) ring fused with a silacyclobutene ring but also the remarkable deformation around the double bonds; the sum of the bond angles around the unsaturated bridgehead carbon was 333 degrees . The strain energy of a model 5-silabicyclo[3.2.0]hepta-1,3,6-triene was calculated at the MP2/6-31+G(d,p)//B3LYP/6-31+G(d) level (30.2 kcal/mol) to be comparable to that for parent bicyclo[3.2.0]hepta-1,3,6-triene (30.7 kcal/mol). Despite the high steric strain, 2 was stable enough to be kept intact for several months in the air. The high stability is ascribed to the effective steric protection of the ring system by the bulky substituents.     

Detection of a metallo-beta-lactamase (IMP-1) by fluorescent probes having dansyl and thiol groups

A fluorescent probe for the detection of a metallo-beta-lactamase (IMP-1), N-[2-(5-dimethylaminonaphthalen-1-ylsulfonylamino)ethyl]-3- mercaptopropionamide (Dansyl-C2SH), 1, was designed based on combining the inhibitory function of mercaptocarboxylate and a fluorophore. The binding of 1 to IMP-1 was investigated by fluorescence spectroscopy. Compound 1 can act as fluorescent probe for detecting IMP-1 selectively.     

Separation of N2-ethyl-2'-deoxyguanosine-5'-monophosphate and four native deoxyribonucleoside monophosphates using capillary zone electrophoresis with polyethylene glycol as buffer additive

We investigated the separation of five deoxyribonucleoside monophosphates: 2'-deoxyguanosine-5'-monophosphate (dGMP), 2'-deoxyadenosine-5'-monophosphate (dAMP), 2'-deoxycytosine-5'-monophosphate (dCMP), 2'-deoxythymidine-5'-monophosphate (dTMP) and a dGMP adduct possessing N2-ethyl-guanine, which has been noted in relation to mutagenesis of alcohol, using capillary zone electrophoresis (CZE). The concentration of polyethylene glycol (PEG) as a modifier and the pH of the running solutions can efficiently control the observed separation. Interaction of PEG with analytes was quantitatively evaluated. PEG worked effectively as a hydrophobic selector in these separations. The values of pKa of the acidic-NH-groups in the base moieties of dGMP, dTMP, and the dGMP adduct are close to that of boric acid used as buffer of the running solutions. The control of their charge was facilitated, enabling improved separations. A more sufficient and fast separation was achieved by both optimization of pH of the running solutions and PEG concentration compared with that obtained by pH control alone. On-line concentration using a stacking method followed by the PEG-assisted CZE was briefly studied.     

Solvent extraction of permanganates (Na, K) by 18-crown-6 ether from water into 1,2-dichloroethane: elucidation of an extraction equilibrium based on component equilibria

Ion-pair formation constants (K_MLA mol⁻¹ dm³) of Na⁺– and K⁺–18-crown-6 ether (18C6) complexes with MnO₄⁻ in water (w) were determined potentiometrically at 25 °C. Simultaneously, extraction constants (K_ex mol⁻² dm⁶) of the permanganates with 18C6 from w into 1,2-dichloroethane at 25 °C were obtained from the spectrophotometric determination of distribution ratios of the permanganates. These K_ex values were divided into K_MLA and other three component equilibrium constants and thereby extraction-selectivity and -ability were discussed in comparison with corresponding metal picrate–18C6 extraction systems reported before.     

AMPHIPHILIC COPOLYMERS AS MEDIA FOR LIGHT-INDUCED ELECTRON TRANSFER-II. ELECTROSTATIC EFFECT ON THE BACK ELECTRON TRANSFER

Abstract— Photosensitized reduction of zwitterionic viologen (SPV) and methyl viologen (MV²⁺) was investigated using an amphiliphilic copolymer having phenanthryl and sulfonate groups (APh) as photosensitizer in aqueous solutions. In the presence of triethanolamine the accumulation of SPV * (photoproduct) was found to be faster than that of MV⁺. This attributed to the electrostatic repulsion between SPV. and anionic segments of APh. Such difference between SPV and MV²⁺ was minimized in the case of the related monomer model. Retardation of the back reaction for the APh-SPV system was also demonstrated by laser photolysis, k _b= 8.7 × 10⁷ M ^-1 s^-1 for the polymer system as compared to k _b= 2.8 × 10⁹ M ^-1 s^-1 for the monomer model system. Strong salt-effects on the yield of the photoreduction and the rate of back reaction confirm the strong electrostatic interaction between the photoproducts and polyanions. This remarkable electrostatic effect of the polyanions was simulated by electrochemical redox reactions by using a graphite electrode coated with APh.     

220-MHz NMR spectra of acrylic monomer–2-substituted 1,3-diolefin alternating copolymers

An investigation by 220-MHz NMR spectroscopy was carried out on the alternating copolymers of acrylic monomer with 2-substituted 1,3-diolefin. The chain structures were determined. The acrylic monomers used were methyl methacrylate (MMA), acrylonitrile (AN), and methacrylonitrile (MAN); isoprene (IP) and chloroprene (CLP) were the 1,3-diolefins. In the MAN–IP alternating copolymer, the 1-position methylene protons of IP showed an AB quartet peak, confirming the α-1 linkage structure. Similarly, in the MMA–CLP and AN–CLP copolymers, the 1-position methylene protons of CLP showed and AB quartet and an ABX pattern, respectively, confirming the α-1 linkage structure in both these cases also. The α-1 linkage structure was also revealed by the decoupling technique in the MAN–CLP alternating copolymer. The AN–IP and MMA–IP alternating copolymers also possess a bond between the α-position of the acrylic monomer and the 1-position of IP. The monomeric units in the alternating copolymers of acrylic monomers with 2-substituted 1,3-diolefins were generally linked at the α-position of acrylic monomer and the 1-position of 1,3-diolefin. On the other hand, in the Diels-Alder adducts of acrylic monomer with 2-substituted 1,3-diolefin, the reaction takes place between the α-position of acrylic monomer and the 4-position of 1,3-diolefin. The regioselectivity of the alternating copolymers and the Diels-Alder adducts is quite compatible with the expectations from molecular orbital theory.