Synthesis, structures, and properties of meso-phosphorylporphyrins: self-organization through P-oxo-zinc coordination

The synthesis, structures, and optical and electrochemical properties of meso-phosphorylporphyrins are described. The copper-catalyzed carbon-phosphorus cross-coupling reaction of a meso-iodoporphyrin with di-n-butyl phosphite and diphenylphosphane oxide has proved to be an efficient and general method for the synthesis of meso-phosphorylporphyrins. Zinc phosphorylporphyrins thus obtained readily undergo self-organization through P-oxo-Zn coordination to form noncovalently linked, cofacial porphyrin dimers or linear oligomers, which have been characterized by spectroscopic methods and X-ray crystallographic analyses. In toluene, CH(2)Cl(2), and CHCl(3), the zinc phosphorylporphyrins exist mostly as dimers or monomers, depending on their concentrations, the temperature, and the presence of additives. The self-association constants for dimerization in toluene have been determined by UV/Vis absorption titration measurements. The meso-diphenylphosphorylporphyrin dimer displays excitonic coupling of the Soret band with a splitting energy of 940 cm(-1). Fluorescence lifetimes of the zinc phosphorylporphyrins have been found to be affected only slightly by the concentration of the solution, and by the addition of triphenylphosphane oxide, suggesting that the effect of dimerization on their photodynamics in the S(1) state is negligible. On the other hand, the effect of dimerization is clearly reflected in their electrochemical oxidation processes, as the initially produced radical cations are efficiently delocalized over the two porphyrin rings. These findings demonstrate the potential utility of meso-phosphorylporphyrins as new models for the special pair in photosynthesis and as new building blocks for porphyrin-based supramolecular materials.     

Tetraalkylammonium Picrates in the Dichloromethane–Water System: Ion-Pair Formation and Liquid–Liquid Distribution of Free Ions and Ion Pairs

Equilibria concerning picrates of tetraalkylammonium ions (Me₄N⁺, Et₄N⁺, Pr₄N⁺, Bu₄N⁺, Bu₃MeN⁺) in a dichloromethane−water system have been investigated at 25 ^∘C. The 1:1 ion-pair formation constants (K _IP,o ^o) in dichloromethane at infinite dilution were conductometrically determined. The distribution constants (K _D ^o) of the ion pairs and the free cations between the solvents were determined by a batch-extraction method. The K _IP,o ^o value varies in the cation sequence, Bu₄N⁺ ≈ Pr₄N⁺ ≈ Et₄N⁺ < Bu₃MeN⁺ < < Me₄N⁺; this trend is explained by the electrostatic cation−anion interaction taking into account the structures of the ion pairs determined by density functional theory calculations. For the ion pairs of the symmetric R₄N⁺ cations, there is a linear positive relationship between log₁₀ K _D ^o and the number of methylene groups in the cation (N _{CH 2}). The ion pair of asymmetric Bu₃MeN⁺ has a higher distribution constant than that expected from the above log₁₀ K _D ^o versus N _{CH 2} relationship. These cation dependencies of log₁₀ K _D ^o for the ion pairs are explained theoretically by using the Hildebrand-Scatchard equation. For all the cations, the log₁₀ K _D ^o value of the free cation increases linearly with N _{CH 2}; the variation of log₁₀ K _D ^o is discussed by decomposing the distribution constant into the Born-type electrostatic contribution and the non-Born one, and attributed to the latter that is governed by the differences in the molar volumes of the cations. The cation dependencies of the ion-pair extractability and ion pairing in water are also discussed. An erratum to this article can be found at     

Preparation of telechelic oligomers by thermal degradation of propylene copolymers

The reactive end groups of nonvolatile oligomers obtained by controlled thermal degradation of poly(propylene-ran-ethylene) and poly(propylene-ran-1-butene) were determined by ¹H and ¹³C NMR spectroscopy. The molar ratio of unsaturated to saturated end groups was found to be about 9:1. The average number of unsaturated end groups per molecule was between 1.6 and 1.8, indicating that 60–80 mol% of the oligomer molecules were telechelic, having two terminal unsaturated end groups. These oligomers had a lower polydispersity than the raw material, despite their lower molecular weight and melting temperature. Although the end groups resulting from each monomer unit could be detected by ¹³C NMR, the end group composition differed from that of the main chains of the raw materials. The end group composition was satisfactorily explained by the differences in bond dissociation energy and activation energy of elementary reactions that occurred during thermal degradation, based on the monomer composition of the raw materials.     

Theoretical study of the electronic structure of the lower states of the [Cr2Cl9]3- and [Mo2Cl9]3- ions

The electronic structure of the lower states of a trigonal Cr3+ pair and Mo3+ pair, which occur in the Cs3M2Cl9 crystal (M=Cr,Mo), were studied by theoretical calculations carried out according to several methods: multireference singly and doubly excited configuration interaction, second-order configuration interaction, and multireference coupled-pair approximation. We employed a model of a [M2Cl9]3- anion embedded in a cage of point charges, which were arranged so as to simulate the anion in the crystal. The model core potential was utilized, where the relativistic effect was included for Mo. Results of the Cr complex showed that there were no direct bonds between the Cr metals. The lower electronic spectra of the [Cr2Cl9]3- ion were interpreted in terms of the electronic spectra of [CrCl6]3-. The lowest state of simultaneous excitation in both metals was considered. The [Mo2Cl9]3- ion exhibited a single direct bond between the metals. Reflecting this single bond, the observed singlet-triplet splitting was much larger than that in the case of Cr and the calculated splitting was in good agreement with the observed one. We account for the electronic spectra of the [Mo2Cl9]3- complex, which exhibited quite different features in the electronic excitation spectra in comparison with those of the Cr complex.     

Surface derivatization of poly(p-phenylene terephthalamide) fiber designed for novel separation and extraction media

The surface derivatization of poly(p-phenylene terephthalamide) fiber was studied. The obtained surface-derivatized filaments were packed into a fused-silica capillary to evaluate its surface characteristics by using GC. As the stationary phase for GC the surface-derivatized fibers showed higher retention for alkanes and alkylbenzenes than that with the untreated Kevlar fiber. The improvements on the retention power and the peak shape were observed on the benzyl-modified fibrous stationary phase. The derivatized fibrous materials were also evaluated as the extraction medium in fiber-in-tube SPE, and the effect of the surface modification on the extraction power was compared to the parent fiber. The results indicated that the modified fiber possessed a higher extraction power than the untreated fiber. Based on the facts, the successful modification of the fiber surface was estimated.     

Palladium-Catalyzed Decarboxylative Alkynylation of α-Acyloxyketones by C(sp3)−O Bond Cleavage

Palladium-catalyzed decarboxylative alkynylation of α-acyloxyketones triggered by C(sp³)−O bond cleavage is disclosed. The decarboxylation strategy featuring a neutral reaction condition enabled an unprecedent catalytic alkynylation of a ketone enolate. The reaction was applied to a variety of substrates, giving desired products in good yields. We successfully obtained X-ray crystallography of a new palladium–enolate intermediate that was synthesized by a reaction of [Pd(cod)(CH₂TMS)₂] with XPhos and α-acyloxyketone at room temperature, indicating facile C(sp³)−O bond disconnection.     

An expedient, regioselective synthesis of 2-alkylamino- and 2-alkylthiothiazolo[5,4-e]indoles

1-Benzenesulfonyl-5-aminoindole 5, prepared from 5-nitroindole 3, was condensed with alkyl isothiocyanates and separately with carbon disulfide and alkyl bromides/iodides to furnish efficiently the corresponding N-alkyl-thioureidoindoles 6a-c and the alkyl N-(indol-5′-yl)dithiocarbamates 9a-e, respectively. Their cyclisation using N-bromosuccinimide (NBS) and 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), in the cold, followed by indolic N-deprotection, furnished regioselectively the 2-alkylamino- and the 2-alkylthiothiazolo[5,4-e]indoles 8a-c and 11a-e, respectively, in good overall yields.     

Application of intramolecular 1,3-dipolar cyclic addition of azide and olefin; construction of (pyrrolidine-2-ylidene)glycinate and glycinamides

Oxopropyl E-(pyrrolidine-2-ylidene)glycinamide (5c) and allyl E-(pyrrolidine-2-ylidene)glycinate (5d) were effectively synthesized from 2,3,5-tri-O-benzyl-4-O-tert-butyldimethylsilyl(TBDMS)-D-arabinal (7) using intramolecular 1,3-dipolar cyclic reaction of azide and olefin as a key reaction. These results proved this cyclic reaction should be applicable for the synthesis of various (pyrrolidine-2-ylidene)glycinate and glycinamide. In addition, the development of a synthetic route for the precursor of an unsaturated cyclic dehydro amino acid involved in azinomycins (carzinophilin) using relating glycinate, methyl E-(pyrrolidine-2-ylidene)glycinate (5a) was described.     

Effects of poly(ethylene glycol) (PEG) concentration on the permeability of PEG-grafted liposomes

Poly(ethylene glycol)-grafted liposomes (PEG-liposomes) were prepared from dipalmitoylphosphatidylcholine (DPPC) with various amounts of distearoyl-N-monomethoxy poly(ethylene glycol)-succinyl-phosphatidylethanolamines (DSPE-PEG) with PEG molecular weights of 1000, 2000, 3000 and 5000. The effects of DSPE-PEG concentration on the permeability of PEG-liposomes were investigated using carboxyfluorescein (CF). In the gel state, the CF leakage from PEG-liposomes was decreased with increasing mole fractions of DSPE-PEG for all PEG molecular weights. In the liquid-crystalline state, the CF leakage from PEG-liposomes containing DSPE-PEG1000 gradually increased with increasing mole fractions of DSPE-PEG, while that of PEG-liposomes whose molecular weight in PEG units was above 2000 rapidly decreased by the addition of DSPE-PEG. Furthermore, no effect of PEG molecular weight on CF leakage was observed. The relationship between the fluorescence polarization of 1,6-diphenyl-1,3,5-hexatriene (DPH) (or 1-(4-trimethylammoniumphenyl)-6-phenyl-1,3,5-hexatriene (TMA-DPH)) and the mole fraction of DSPE-PEG for PEG-liposomes was also investigated. No significant changes in fluorescence polarization of DPH for liposomal bilayer membranes was observed in the gel and liquid-crystalline states due to the addition of DSPE-PEG, while that of TMA-DPH was decreased compared with that of liposomes without DSPE-PEG in both states.