Hole Burning and Fluorescence Spectra of Sol-Gel Derived Sm2+-Doped Glasses

Sm2+-doped glasses in the system of Al2O3-SiO2 were prepared by sol-gel processing of metal alkoxides and reacting with H2 gas at 800°C. The hole burning properties of these glasses were investigated. The holes were burned in the 7F0 5D0 line of the Sm2+ ions using a DCM dye laser at 77 K. The hole depth increased with increasing the laser irradiation time, reaching up to 15% of the total intensity within a few hundred seconds. The hole width was 3 cm–1 full width at half maximum. Fluorescence line narrowing spectra of the 5D0 7 F1 transition were analyzed to study the local structure surrounding the Sm2+ ion. It is concluded that the Sm2+ ions are closely coordinated with nine oxygens of the AlO6 group in aluminosilicate glasses and that the addition of Al3+ ions into glass induces an increase in the coordination number of the Sm2+.     

Determination of cadmium in river water by sequential metal vapor elution analysis

Determination of cadmium in river water by sequential metal vapour elution analysis (column temperature; > 1500 K) with argon and hydrogen carrier gas and with atomic absorption spectrometric detection is described. The column is made of a molybdenum capillary tube (i.d. 1.22 mm) and the temperature is 1760 K. The cadmium vapor was separated from those of calcium, iron and sodium. The calibration graph was linear up to 15 μ/ml. Relative standard deviations of 0.8–4.3% were obtained in the range 1 to 15 μ/ml. Cadmium in spiked samples (river water) was determined. The results were in good agreement with the amount spiked.     

Theoretical study of the electronic structure of the lower states of the [Cr2Cl9]3- and [Mo2Cl9]3- ions

The electronic structure of the lower states of a trigonal Cr3+ pair and Mo3+ pair, which occur in the Cs3M2Cl9 crystal (M=Cr,Mo), were studied by theoretical calculations carried out according to several methods: multireference singly and doubly excited configuration interaction, second-order configuration interaction, and multireference coupled-pair approximation. We employed a model of a [M2Cl9]3- anion embedded in a cage of point charges, which were arranged so as to simulate the anion in the crystal. The model core potential was utilized, where the relativistic effect was included for Mo. Results of the Cr complex showed that there were no direct bonds between the Cr metals. The lower electronic spectra of the [Cr2Cl9]3- ion were interpreted in terms of the electronic spectra of [CrCl6]3-. The lowest state of simultaneous excitation in both metals was considered. The [Mo2Cl9]3- ion exhibited a single direct bond between the metals. Reflecting this single bond, the observed singlet-triplet splitting was much larger than that in the case of Cr and the calculated splitting was in good agreement with the observed one. We account for the electronic spectra of the [Mo2Cl9]3- complex, which exhibited quite different features in the electronic excitation spectra in comparison with those of the Cr complex.     

Novel alkenylative cyclization using a ruthenium catalyst

Novel alkenylative cyclization of enyne was developed using Cp*RuCl(cod) under ethylene gas at room temperature.     

Experimental determination of ionization potentials of tetraphenylporphine and metallotetraphenylporphines

Gas-phase ionization potentials of tetraphenylporphine and some metallotetraphenylporphines have been determined by the method of photocurrent measurements in nonpolar solvents reported previously [1]. The values obtained range from 5.9 to 6.3 eV, depending on the central metal ion, correlating well with the reported polarographic oxidation potentials. It has been concluded that photoelectron ejection from these complexes in isooctane occurs from the porphyrin π-system in all cases including Co(II) tetraphenylporphine, in which the electron is thought to be removed from the metal in polar solvents.     

Substoichiometric isotope-dilution determination of sulphur after conversion to methylene blue and ion-pair extraction with dodecyl sulphate

The proposed substoichiometric determination of sulphur includes two key steps: conversion of sulphur to methylene blue and ion-pair extraction of methylene blue into chloroform with a substoichiometric amount of dodecyl sulphate. The method, combined with isotope dilution is applied to the determination of total sulphur in NBS SRM Citrus Leaves and in a seaweed sample (Laminaria religiosa Miyabe). The mean values obtained were 0.401±0.008% S (RSD 2%; n=9; certified value 0.407±0.009%) for the SRM, and 0.756±0.012% S (RSD 1.6%; n=5) for the seaweed. A sample of 0.5–1 g containing ca. 100 μg of sulphur can be analysed.     

Extraction equilibrium of palladium(II) with 2-methyl-8-quinolinol into supercritical carbon dioxide fluid

The present study is concerned with the extraction behavior and equilibrium of Pd(II) with 2-methyl-8-quinolinol (HMQ) into supercritical fluid CO(2) (SF-CO(2)). Pd(II)-HMQ complex extracted from a weakly acidic solution (pH 2-3) into SF-CO(2) was determined to be Pd(MQ)(2) on the basis of a slope analysis. The extraction constant K(ex,SF) (=[Pd(MQ)(2)](SF)[H(+)](2)[Cl(-)](4)[PdCl(4)(2-)](-1)[HMQ](-2)) was determined to be 10(4.3+/-0.2) at 8.5 MPa, 45 degrees C and I=0.4 M (H,Na)Cl (1 M=1 mol dm(-3)). The distribution behavior of HMQ between an aqueous and a SF-CO(2) phase was examined so as to discuss quantitatively the extraction equilibrium. The extraction constant (K(ex,Cy)) of Pd(II) with HMQ into cyclohexane with a similar polarity to SF-CO(2) was determined and the K(ex,SF) was compared with the K(ex,Cy). Pd(II) at the concentration range of 10(-5)-10(-4) M in the aqueous solution (pH<3) containing relatively high concentration of chloride ion was found to be extracted efficiently by the SF-CO(2) extraction.     

Theoretical study of photochemical reactions: Electron assignment and the state correlation diagram

A general way for drawing the state correlation diagram and seeking the reaction path is presented. If a high-symmetry reacting system is given, its least-motion path that maintains the symmetry is primarily examined. For a given state, it is judged whether the least-motion path is symmetry allowed or forbidden. If allowed, it is called the direct process. If forbidden, the symmetry imposed on the system should be relaxed, resulting in the mixing of MO 's. Then, the energy barrier of the avoided crossing for some excited states is removed and the possible reaction path is found. After this procedure, the symmetry-allowed paths may be sought by the geometry optimization with a suitable wave function. By the use of such a procedure, the dissociation of diazomethane and (3H-)diazirine is found to proceed via the C_s and C₂ symmetries.     

Synthesis and properties of bowl‐shaped homotriazacalix[3 and 6] arenes and the acyclic analogues

Bowl‐shaped chiral homotriazacalixarenes were prepared by the cyclization reactions of chiral triamines with three equimolar amounts of bis(chloromethyl) phenols or bis(chloromethyl) phenol‐formaldehyde dimers in moderate yields. The corresponding acyclic phenol‐formaldehyde oligomers were also synthesized. The structural analysis of the macrocycles by nmr and circular dichroism spectra imply the existence of chiral transmission from the point chirality of the cysteine bridge to the cyclophane moiety. Their cyclic and acyclic compounds have a π‐base cavity large enough to include the ammonium ion.