Experimental determination of ionization potentials of tetraphenylporphine and metallotetraphenylporphines

Gas-phase ionization potentials of tetraphenylporphine and some metallotetraphenylporphines have been determined by the method of photocurrent measurements in nonpolar solvents reported previously [1]. The values obtained range from 5.9 to 6.3 eV, depending on the central metal ion, correlating well with the reported polarographic oxidation potentials. It has been concluded that photoelectron ejection from these complexes in isooctane occurs from the porphyrin π-system in all cases including Co(II) tetraphenylporphine, in which the electron is thought to be removed from the metal in polar solvents.     

Substoichiometric isotope-dilution determination of sulphur after conversion to methylene blue and ion-pair extraction with dodecyl sulphate

The proposed substoichiometric determination of sulphur includes two key steps: conversion of sulphur to methylene blue and ion-pair extraction of methylene blue into chloroform with a substoichiometric amount of dodecyl sulphate. The method, combined with isotope dilution is applied to the determination of total sulphur in NBS SRM Citrus Leaves and in a seaweed sample (Laminaria religiosa Miyabe). The mean values obtained were 0.401±0.008% S (RSD 2%; n=9; certified value 0.407±0.009%) for the SRM, and 0.756±0.012% S (RSD 1.6%; n=5) for the seaweed. A sample of 0.5–1 g containing ca. 100 μg of sulphur can be analysed.     

Extraction equilibrium of palladium(II) with 2-methyl-8-quinolinol into supercritical carbon dioxide fluid

The present study is concerned with the extraction behavior and equilibrium of Pd(II) with 2-methyl-8-quinolinol (HMQ) into supercritical fluid CO(2) (SF-CO(2)). Pd(II)-HMQ complex extracted from a weakly acidic solution (pH 2-3) into SF-CO(2) was determined to be Pd(MQ)(2) on the basis of a slope analysis. The extraction constant K(ex,SF) (=[Pd(MQ)(2)](SF)[H(+)](2)[Cl(-)](4)[PdCl(4)(2-)](-1)[HMQ](-2)) was determined to be 10(4.3+/-0.2) at 8.5 MPa, 45 degrees C and I=0.4 M (H,Na)Cl (1 M=1 mol dm(-3)). The distribution behavior of HMQ between an aqueous and a SF-CO(2) phase was examined so as to discuss quantitatively the extraction equilibrium. The extraction constant (K(ex,Cy)) of Pd(II) with HMQ into cyclohexane with a similar polarity to SF-CO(2) was determined and the K(ex,SF) was compared with the K(ex,Cy). Pd(II) at the concentration range of 10(-5)-10(-4) M in the aqueous solution (pH<3) containing relatively high concentration of chloride ion was found to be extracted efficiently by the SF-CO(2) extraction.     

Self-oscillation of polymer chains induced by the Belousov-Zhabotinsky reaction under acid-free conditions

A novel self-oscillating polymer was prepared by utilizing the Belousov-Zhabotinsky (BZ) reaction. In this study, a sulfonic acid group was newly introduced as a pH-control site into the copolymer of N-isopropylacrylamide, and the ruthenium complex was introduced as a catalyst site. By introducing the pH-control site, we succeed in causing the soluble-insoluble self-oscillation of the polymer solution under acid-free conditions in which only two BZ substrates, malonic acid and sodium bromate, were present as added agents. The self-oscillating behavior was remarkably influenced by the temperature and polymer concentration, which reflects the intermolecular aggregative capacity of the polymer chains in the reduced state to change the lower critical solution temperature. This achievement of self-oscillation of polymer chains under acid-free conditions may lead to their practical use as novel biomimetic materials under biological conditions.     

Theoretical study of photochemical reactions: Electron assignment and the state correlation diagram

A general way for drawing the state correlation diagram and seeking the reaction path is presented. If a high-symmetry reacting system is given, its least-motion path that maintains the symmetry is primarily examined. For a given state, it is judged whether the least-motion path is symmetry allowed or forbidden. If allowed, it is called the direct process. If forbidden, the symmetry imposed on the system should be relaxed, resulting in the mixing of MO 's. Then, the energy barrier of the avoided crossing for some excited states is removed and the possible reaction path is found. After this procedure, the symmetry-allowed paths may be sought by the geometry optimization with a suitable wave function. By the use of such a procedure, the dissociation of diazomethane and (3H-)diazirine is found to proceed via the C_s and C₂ symmetries.     

Synthesis and properties of bowl‐shaped homotriazacalix[3 and 6] arenes and the acyclic analogues

Bowl‐shaped chiral homotriazacalixarenes were prepared by the cyclization reactions of chiral triamines with three equimolar amounts of bis(chloromethyl) phenols or bis(chloromethyl) phenol‐formaldehyde dimers in moderate yields. The corresponding acyclic phenol‐formaldehyde oligomers were also synthesized. The structural analysis of the macrocycles by nmr and circular dichroism spectra imply the existence of chiral transmission from the point chirality of the cysteine bridge to the cyclophane moiety. Their cyclic and acyclic compounds have a π‐base cavity large enough to include the ammonium ion.     

Cloning and characterization of an active fragment of luciferase from a luminescent marine alga, Pyrocystis lunula

Two marine dinoflagellates, Lingulodinium polyedrum and Pyrocystis lunula, emit light in a reaction involving the enzymatic oxidation of its tetrapyrrole luciferin by molecular oxygen. The characteristic properties of P. lunula luciferase have not been clarified, whereas L. polyedrum luciferase, which has three active domains, has been characterized. A cloned partial cDNA of the P. lunula luciferase encodes an active fragment corresponding to part of domain 2 and all of domain 3 of L. polyedrum luciferase. The homology of the amino acid sequence between the two luciferases in domain 3 is about 84.3%. A recombinant His-tagged luciferase fragment containing domain 3 (Mr = 46 kDa) catalyzed the light-emitting oxidation of luciferin (lambdamax = 474 nm). This protein was purified by a single affinity-chromatography procedure. The pH-activity profile and the bioluminescence spectrum of the recombinant enzyme having a third domain are almost identical to those of an extract from P. lunula cultured in vitro. The recombinant enzyme is active at pH 8.0, although the recombinant enzyme derived from the second domain of L. polyedrum luciferase is inactive at pH 8.0. Substitution of Glu-201 by histidine in the third domain of P. lunula luciferase showed a decrease of activity above pH 7.0, suggesting that histidine residues could be responsible for pH-sensitivity in dinoflagellate luciferase.     

Synthesis and central nervous system stimulant activity of 5,8-methanoquinazolines fused with imidazole,thiadiazole, pyrimidine and 1,3,5-triazine

5,8-Methanoquinazolines fused with imidazoles 4a-4b , thiadiazoles 5–6 , pyrimidines 7, 9, 11 and 12 , and 1,3,5-triazine 13 were prepared starting from (5R,8S)-2-amino-8,9,9-trimethyl-5,6,7,8-tetrahydro-5,8-methanoquinazoline 3 . Most compounds possessed central nervous system stimulant activities.     

Photophysical and (photo)electrochemical properties of a coumarin dye

A new coumarin dye, cyano-{5,5-dimethyl-3-[2-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)vinyl]cyclohex-2-enylidene}-acetic acid (NKX-2753), was prepared and characterized with respect to photophysical and electrochemical properties. It was employed as a dye sensitizer in dye-sensitized solar cells and showed efficient photon-to-electron conversion properties. The photocurrent action spectrum exhibited a broad feature with a maximum incident photon-to-electron conversion efficiency (IPCE) of 84% at 540 nm, which is comparable to that for the famous red dye RuL2(NCS)2 (known as N3), where L stands for 2,2'-bipyridyl-4,4'-dicarboxylic acid. The sandwich-type solar cell with NKX-2753, under illumination of full sun (AM1.5, 100 mW cm(-2)), produced 16.1 mA cm(-2) of short-circuit photocurrent, 0.60 V of open-circuit photovoltage, and 0.69 of fill factor, corresponding to 6.7% of overall energy conversion efficiency using 0.1 M LiI, 0.05 M I2, 0.1 M guanidinium thiocyanate, and 0.6 M 1,2-dimethyl-3-n-propyl-imidazolium iodide in dry acetonitrile as redox electrolyte. In comparison with its analogue NKX-2586 (Langmuir 2004, 20, 4205), NKX-2753 with an extra side ring on the alkene chain produced much higher IPCE values at the same conditions. The side ring acted as a spacer to efficiently prevent dye aggregation when adsorbed on the TiO2 surface, resulting in significant improvements of short-circuit photocurrent, open-circuit photovoltage, and fill factor compared with NKX-2586 that aggregated on the TiO2 surface.