Diastereoselective synthesis of psi[(E)-CH=CMe]- and psi[(Z)-CH=CMe]-type dipeptide isosteres by organocopper-mediated anti-S(N)2' reaction

[reaction: see text] Acyclic psi[(E)-CH=CMe]- and psi[(Z)-CH=CMe]-type dipeptide isosteres were efficiently synthesized. In a key reaction, alpha-alkylation of gamma-mesyloxy-beta-methyl-alpha,beta-unsaturated esters with organocyanocuprates in diethyl ether or tetrahydrofuran preferentially afforded the psi[(E)-CH=CMe]- or psi[(Z)-CH=CMe]-isomer, respectively, via anti-S(N)2' mechanism.     

Polydimethylsiloxane connection for quartz microchips in a high-pressure system.

An interconnecting technique, the "PDMS connection method", for quartz microchips in a high-pressure system is presented. The connection between quartz microchips is an essential technology for modular microfluidic devices, such as microchip-HPLC. PDMS was applied to the seal material, being spread on the seal side of the chips, and set into the metal housing. The characteristics of the PDMS connection method concerning pressure resistance and the extension of the peak were examined. The experimental results showed a good seal at 5 MPa, which seem to be sufficient for realizing microchip-HPLC utilizing a monolithic silica capillary column as a separation medium. The influence of the extra column effect on chromatographic separation was almost the same as in the case using a commercial union fitting. In addition, the PDMS connection enabled the detachability of chip-based modules with user-friendliness. Our experimental findings suggest that the novel PDMS connection method can possibly be applied as a generic technology in high-pressure microTAS.     

Synthesis and Crystal Structure of p-tert-Butylthiacalix[8]arene: A New Member of Thiacalixarenes

Even though it was obtained in poor yield, p-tert-butylthiacalix[8]arene (TC8A) has been synthesized as a new member of thiacalix[n]arenes by the terephthalate-induced cyclization of a mixture of acyclic oligomers, which was obtained by the reaction between p-tert-butylphenol and sulfur with CaO in ethylene glycol/diphenyl ether system. Slow evaporation of the chloroform solution of TC8A afforded guest-free crystals consisting of TC8A itself. The close-packed crystal structure of TC8A resembles that of p-tert-butylcalix[8]arene (C8A) closely, containing a plated loop molecular structure.This revised version was published online in July 2005 with a corrected issue number.     

Determination of a polymeric hindered amine light stabilizer in polypropylene formulated with magnesium hydroxide flame retardant by reactive thermal desorption-gas chromatography.

A polymeric hindered amine light stabilizer (HALS), Tinuvin 622 (MW [symbol: see text] 4000), in PP materials formulated with a magnesium hydroxide flame retardant was determined by reactive thermal desorption (RTD) gas chromatography (GC). Two kinds of the HALS components that were formed through the RTD in the presence of tetramethylammonium hydroxide [(CH3)4NOH, TMAH] were clearly observed in the chromatograms of the PP samples, with negligible interference from the other additives and the PP substrate. Here, the coexisting flame retardant was proved to affect significantly the RTD process of the occluded HALS. As a result, the recovery of the HALS components in the RTD-GC chromatograms of the PP samples increased with increase in the content of the flame retardant. This enhancement of the HALS recovery is attributed mainly to the preferential exposure of the HALS on the surface of the ground PP sample through the interaction between the polymeric HALS and the flame retardant in the molten PP during kneading. In spite of such a considerable action of the flame retardant, the observed intensities of the characteristic peaks of HALS by RTD-GC showed a good linear relationship with the HALS content in the PP samples with constant content of the flame retardant (50 phr); this relationship could be used as the calibration line for the determination of the polymeric HALS in the PP materials containing the flame retardant.     

Facile routes to natural acyclic polyenes syntheses of spilanthol and trail pheromone for termite

The synthetic procedures for spilanthol and trail-following pheromone for a southern subterranean termite were described. The syntheses heavily depend on the new diene synthesis using titanium reagent.     

Multi-component coupling synthesis of polycyclic pyrrole derivatives via Ir- and Rh-catalyzed cycloisomerizations with microwave heating

CuBr₂-catalyzed three-component coupling of N-benzylallylamine, ethyl glyoxalate, and terminal alkynes afforded glycinate-tethered 1,6-enynes, which were further transformed into polycyclic pyrrole-2-carboxylates via iridium-catalyzed cycloisomerization/Diels-Alder cycloaddition/dehydrogenation sequence under conventional and microwave heating conditions. The corresponding β-amino acid analogues were obtained from the Ir-catalyzed reaction of enynes prepared from lithium amides of allylamines with methyl non-2-en-4-ynoate. The Cu-catalyzed Mannich-type condensation was further extended to the synthesis of the glycinate-tethered dienyne and cyclopropylenyne, which were subjected to Rh-catalyzed cycloisomerizations to furnish bicyclic amino acids.     

Stereoselective synthesis of 1,4-disubstituted 1,3-diene

New synthetic methods for the preparation of 1,3-dienes are described.     

Syntheses and reactions of functional polymers. XCIII. Syntheses of polymers containing the N-(4-hydroxy-3-nitrophenyl)succinimide structure in the chain and the use of these activated polymer esters of N-blocked amino acids or peptides

Polymers containing the N-(4-hydroxy-3-nitrophenyl)succinimide residue were designed in order to achieve acyl activation of a reacting carboxylic acid in the solid phase. These polymers were prepared through the following three routes: (a) styrene was allowed to copolymerize with N-(4-hydroxy-3-nitrophenyl)- or N-(4-acetoxy-3-nitrophenyl)maleimide, (b) styrene was copolymerized with N-(4-acetoxyphenyl)maleimide in the presence of divinylbenzene (DVB), and the copolymer obtained was hydrolyzed and nitrated, (c) a copolymer of maleic anhydride and styrene was reacted with p-aminophenol, followed by nitration. The polymers prepared by routes b and c were converted to the activated polymer esters of N-blocked amino acids and peptides by using dicyclohexylcarbodiimide (DCC). The acylated polymers thus obtained were treated with amino acid esters and found to give peptides quantitatively without racemization.     

Pd.H-C Interactions. Preparation and Structure of Orthometalated Tetranuclear Complexes of Palladium(II) and Platinum(II)

The reaction of 2-(1-naphthyl)benzothiazoline with palladium(II) acetate leads to helical mononuclear and orthometalated tetranuclear products. The molecular structures of mononuclear palladium(II) [Pd(H1-nabz)(2)] (1) (H(2)1-nabz = 2-N-(1-naphthylmethylideneamino)benzenethiolate), tetranuclear palladium(II) [Pd(4)(1-nabz)(4)] (2) and tetranuclear platinum(II) [Pt(4)(1-nabz)(4)] (3) have been determined by single-crystal X-ray diffraction method. Crystal data for complex 1 are as follows: a = 14.208(3) ?, b = 18.227(4) ?, c = 14.398(8) ?; beta = 94.55(3) degrees; V = 3717.0(23) ?(3); space group = P2(1)/n, Z = 4. Crystal data for the complex 2 are as follows: a = b = 15.798(3) ?, c = 23.728(4) ?; V = 5921.7(20) ?(3); space group = I4(1)/a, Z = 16 for the Pd(1-nabz) unit. Crystal data for the complex 3 are as follows: a = b = 15.496(2) ?, c = 24.348(3) ?; V = 5846.3(20) ?(3); space group = I4(1)/a, Z = 16 for the Pt(1-nabz) unit. The mononuclear palladium(II) complex reveals short ortho-hydrogen.palladium distances of 2.66(7) and 2.48(7) ?. These short distances and (1)H NMR studies provide a M.H-C interaction which can be regarded as a three-center four-electron interaction. The molecular structures of 2 and 3 confirm the formation of unusual tetranuclear compounds featuring a rare C,N,S-tridentate ligand derived from orthometalation of pendant side arm. The structural and chemical properties of the mononuclear palladium(II) complex 1 clearly suggest that 1 is a potential intermediate in the formation of the tetranuclear complex 2 by orthometalation reactions.     

SPECTRAL ANALYSIS OF CHLOROPHYLL a AGGREGATES IN THE PRESENCE OF WATER-SOLUBLE MACROMOLECULES

Abstract— The absorption and fluorescence spectra of chlorophyll a (Chi a) aggregates formed in aqueous solutions of polyvinyl alcohol) (PVA), polyvinyl pyrrolidone) (PVP), and bovine serum albumin (BSA) were analyzed by curve-fitting methods in the wavelength region from 650 to 800 nm. The results indicated that the aggregation of Chi a to polymeric forms such as (Chia–2H₂0), was suppressed in the presence of the macromolecules. The suppression was due to a coordination of macromolecule bound ligands to Chi a and was strongest in BSA and weaker in PVA. There were differences in the spectra even though the same types of polymeric Chi a forms were observed due to characteristically different composition of these forms. Fluorescence patterns indicated that energy was transferred from the shorter to the longer wavelength forms.