Adsorption of several gases on flexible metal organic framework [Cu(dhbc)2(4,4'-bpy)]·H2O

The adsorption of ten gases on the flexible metal organic framework material [Cu(dhbc)(2)(4,4'-bpy)]·H(2)O (Cu(db)) has been measured over a wide range of temperatures and pressures. The gate opening condition and driving force behind gate adsorption for Cu(db) were discussed by examining the adsorption isotherms. The adsorption isotherms for each adsorbate can be generalized to a characteristic curve using the adsorption potential energy (ε) and the adsorption volume. The adsorption potential (ε(gate)) at gate opening is almost constant over a wide range of temperatures; thus, the gate pressure at a desired temperature can be deduced using the ε(gate) evaluated from one adsorption isotherm. The gate opening capacity of the gases was arranged in the order: CO(2)≒N(2)O>C(2)H(4)≒Xe>CH(4)>CO>O(2)>Ar≒N(2)>H(2), which is governed by the interaction energy between the outer surface of Cu(db) and the adsorbate. It is suggested that the gate effect is brought about when the integral interaction energy of adsorbates with the Cu(db) surface exceeds a defined limit correlating with the π-π stacking energy of Cu(db) layers.     

POLARIZED TIME-RESOLVED FLUORESCENCE SPECTRA OF PHYCOBILISOMES ISOLATED FROM Tolypothrix tenuis EMBEDDED IN POLY(VINYL ALCOHOL) FILM

–Time-resolved fluorescence spectra in the ps time range were measured on phycobilisome (PBS) embedded in poly(vinyl alcohol) films. The cyanobacterium Tolypothrix tenuis was used as a source of PBS because the pigment composition and the structure of the PBS are well defined. Isotropic PBS in the unstretched film and PBS uniaxially oriented in the stretched film were investigated. Diameters of PBS hemidiscs were oriented parallel to the film-stretching direction. The time-resolved fluorescence spectra of the unstretched sample and of the two polarized components in the stretched samples showed several differences in the rise and decay. The delay time, estimated from the time span between the maximum laser pulse and maximal intensity of the phycocyanin and allophycocyanin fluorescence, was much longer than that reported in the aqueous media. This suggests occurrence of a higher thermal deactivation of PBS in polymer film than in aqueous media. The excitation energy transfer from excited phycocrythrin to allophycocyanin was more efficient in the unstretched than in the stretched samples, and it was greater in the parallel polarized component of the stretched sample than in the perpendicular component. The present results are in agreement with a previous suggestion which states that there are two independent pathways of excitation energy transfer in PBS and that there is more than one final emitter of fluorescence. The molecules taking part in various pathways of energy transfer differ in their orientation within PBS.     

1,2-bis(4-methoxyphenyl)ethylenediamine as a fluorogenic reagent for reducing carbohydrates

Eight 1,2-diarylethylenediamines in the meso- or DL-form produce fluorescence when heated with reducing carbohydrates in an alkaline medium. Of the diamines, meso-1,2-bis(4-methoxyphenyl)ethylenediamine is the most favourable reagent for reducing carbohydrates, including 2- deoxy sugars, amino sugars and sialic acids. The reagent permits the fluorimetric determination of reducing carbohydrates at concentrations as low as 0.2–0.9 nmol ml^?1.     

Synthesis of Molecular Wires of Linear and Branched Bis(terpyridine)‐Complex Oligomers and Electrochemical Observation of Through‐Bond Redox Conduction

Films of linear and branched oligomer wires of Fe(tpy)₂ (tpy=2,2′:6′,2′′‐terpyridine) were constructed on a gold‐electrode surface by the interfacial stepwise coordination method, in which a surface‐anchoring ligand, (tpy? C₆H₄N?NC₆H₄? S)₂ ( 1 ), two bridging ligands, 1,4‐(tpy)₂C₆H₄ ( 3 ) and 1,3,5‐(C?C? tpy)₃C₆H₃ ( 4 ), and metal ions were used. The quantitative complexation of the ligands and Fe^II ions was monitored by electrochemical measurements in up to eight complexation cycles for linear oligomers of 3 and in up to four cycles for branched oligomers of 4 . STM observation of branched oligomers at low surface coverage showed an even distribution of nanodots of uniform size and shape, which suggests the quantitative formation of dendritic structures. The electron‐transport mechanism and kinetics for the redox reaction of the films of linear and branched oligomer wires were analyzed by potential‐step chronoamperometry (PSCA). The unique current‐versus‐time behavior observed under all conditions indicates that electron conduction occurs not by diffusional motion but by successive electron hopping between neighboring redox sites within a molecular wire. Redox conduction in a single molecular wire in a redox‐polymer film has not been reported previously. The analysis provided the rate constant for electron transfer between the electrode and the nearest redox‐complex moiety, k₁ (s^?1), as well as that for intrawire electron transfer between neighboring redox‐complex moieties, k₂ (cm² mol^?1 s^?1). The strong effect of the electrolyte concentration on both k₁ and k₂ indicates that the counterion motion limits the electron‐hopping rate at lower electrolyte concentrations. Analysis of the dependence of k₁ and k₂ on the potential gave intrinsic kinetic parameters without overpotential effects: k₁⁰=110 s^?1, k₂⁰=2.6×10¹² cm² mol^?1 s^?1 for [n Fe 3 ], and k₁⁰=100 s^?1, k₂⁰=4.1×10¹¹ cm² mol^?1 s^?1 for [n Fe 4 ] (n=number of complexation cycles).     

Multi-component coupling synthesis of polycyclic pyrrole derivatives via Ir- and Rh-catalyzed cycloisomerizations with microwave heating

CuBr₂-catalyzed three-component coupling of N-benzylallylamine, ethyl glyoxalate, and terminal alkynes afforded glycinate-tethered 1,6-enynes, which were further transformed into polycyclic pyrrole-2-carboxylates via iridium-catalyzed cycloisomerization/Diels-Alder cycloaddition/dehydrogenation sequence under conventional and microwave heating conditions. The corresponding β-amino acid analogues were obtained from the Ir-catalyzed reaction of enynes prepared from lithium amides of allylamines with methyl non-2-en-4-ynoate. The Cu-catalyzed Mannich-type condensation was further extended to the synthesis of the glycinate-tethered dienyne and cyclopropylenyne, which were subjected to Rh-catalyzed cycloisomerizations to furnish bicyclic amino acids.     

Design and synthesis of 5'-deoxy-5'-phenyladenophostin A, a highly potent IP3 receptor ligand

[structure: see text] 5'-Deoxy-5'-phenyladenophostin A (5), designed as a useful IP(3) receptor ligand based on the previous structure-activity relationship studies, was successfully synthesized via two key stereoselective glycosidation steps. This compound proved to be a highly potent IP(3) receptor agonist.     

Synthesis and Crystal Structure of p-tert-Butylthiacalix[8]arene: A New Member of Thiacalixarenes

Even though it was obtained in poor yield, p-tert-butylthiacalix[8]arene (TC8A) has been synthesized as a new member of thiacalix[n]arenes by the terephthalate-induced cyclization of a mixture of acyclic oligomers, which was obtained by the reaction between p-tert-butylphenol and sulfur with CaO in ethylene glycol/diphenyl ether system. Slow evaporation of the chloroform solution of TC8A afforded guest-free crystals consisting of TC8A itself. The close-packed crystal structure of TC8A resembles that of p-tert-butylcalix[8]arene (C8A) closely, containing a plated loop molecular structure.This revised version was published online in July 2005 with a corrected issue number.     

Development of miniaturized multi-channel high-performance liquid chromatography for high-throughput analysis

We have developed miniaturized multi-channel high-performance liquid chromatography (HPLC) system. With this system, we can simultaneously separate multiple samples, using a single high-pressure gradient pump, a chip-based sample injection unit, a monolithic silica capillary column array, and a multi-channel UV detection unit based on fiber optics. The injection unit has a simplified structure composed of brass housing and a quartz microchip having microchannels and access ports, which enable a direct injection of sample to multi-channel by commercial multichannel micropipette. Moreover, that possesses a function of microvalve, and on-chip definition of sample injection plugs achieved with a cross channel injection method, providing each column of monolithic silica capillary array. The substances in channels were simultaneously detected with UV having multiple cells. Standard samples were analyzed for characterizing newly developed system, and sharp peaks were obtained with reproducibility data of < 0.9% (R.S.D.). Analysis of tryptic digestion of casein was also employed. These results show that the novel multi-channel HPLC system has the benefits for the high-throughput analysis in the post-genomic analysis/combinatorial chemistry.     

Estimating the covariance matrix and the generalized variance under a symmetric loss

For estimating the power of a generalized variance under a multivariate normal distribution with unknown means, the inadmissibility of the best affine equivariant estimator relative to the symmetric loss is shown, and a class of improved estimators is given. The problem of estimating the covariance matrix is also discussed.     

Energy transfer between excitons and plasmons in semiconductor-metal hybrid nanostructures

We summarized our recent optical studies on semiconductor nanoparticle (NP) based hybrid nanostructures: isolated CdSe NPs on Au substrates, close-packed CdSe NP monolayers on Au substrates, and close-packed monolayers of mixed CdSe/Au NPs. Luminescence properties of semiconductor-metal hybrid nanostructures were studied by space-resolved optical imaging spectroscopy and time-resolved luminescence spectroscopy. The luminescence spectra and dynamics of isolated and assembled NPs depend on the local environments. We discuss exciton-plasmon interactions in semiconductor-metal hybrid nanostructures.