Facilitated sulfate transfer across the nitrobenzene-water interface as mediated by hydrogen-bonding ionophores.

Facilitated SO4(2-) transfers by hydrogen bond-forming ionophores are investigated across the nitrobenzene (NB)-water interface by using polarography with a dropping electrolyte electrode. Bis-thiourea 1, alpha,alpha'-bis(N'-p-nitrophenylthioureylene)-m-xylene, is found to significantly facilitate the transfer of the highly hydrophilic SO4(2-) whereas its counterpart, N-(p-nitrophenyl)-N'-propylthiourea (ionophore 2), cannot. In contrast to the predominant formation of a 1:1 complex with SO4(2-) in the bulk NB phase, the SO4(2-) transfer assisted by 1 is indeed based on the formation of a 1:2 complex between SO4(2-) and ionophore, even under the condition of [SO4(2-)]aq > [1]org. Such an exclusive formation of the 1:2 (SO4(2-) to ionophore) complex at the NB-water interface is not observed with structurally similar bis-thiourea 3, alpha,alpha'-bis(N'-phenylthioureylene)-m-xylene, where p-nitrophenyl moietes of bis-thiourea 1 are simply replaced by phenyl groups. The facilitated transfer of SO4(2-) with bis-thiourea 1 is further compared to that of HPO4(2-) and H2PO4- across the NB-water interface, which was previously shown to be assisted by 1 through the formation of the 1:1 and 2:1 (anion to ionophore) complexes, respectively. On the basis of these examinations, unique binding behaviors of hydrogen bond-forming ionophores at the NB-water interface are discussed, with a view towards development of ionophore-based anion-selective chemical sensors.     

Validation of a method for predicting the precision, limit of detection and range of quantitation in competitive ELISA.

The mathematical model for predicting the precision, limit of detection (LOD) and range of quantitation (ROQ) in a competitive enzyme-linked immunosorbent assay (ELISA) proposed by Hayashi et al. (Anal. Chem., 2004, 76, 1295) was validated. The model describes the relative standard deviation (RSD) of concentration estimates by the RSDs of pipetting volumes of analyte, enzyme-conjugated antigen, antibody and substrate solutions, and the standard deviation (SD) of inherent absorbances between the wells in an ELISA plate. For 6 kinds of direct competitive ELISA kits, the LOD and ROQ predicted by the model agreed well with those obtained by experiments with real samples. It was also confirmed that the model is applicable to the prediction of uncertainty that depends on the pipetting error of the viscous antiserum solution. The model was demonstrated to be useful for estimating the LOD and ROQ of competitive ELISA.     

Role of the nature of copper sites in the activity of copper-based catalysts for no conversion

The activities of the copper-based catalysts, Cu²⁺ /SiO²,Cu²⁺ /Vycor and Cu²⁺/ZSM-5, and V²O⁵/TiO² for NO conversion to N² in the presence or absence of NH³ and/or O² have been investigated. The Cu²⁺ /ZSM-5 catalyst exhibited the highest activity, even higher than that of V²O⁵/TiO². Photoluminescence studies of the dehydrated copper-based catalysts have suggested that the copper ions anchored onto ZSM-5 locate as isolated copper species near Brönsted sites in the zeolite channels while the copper ions anchored onto Vycor and SiO² locate mainly as copper dimer forms. These results suggest the role of copper ions which are stabilized with near-lying oxygen vacancies created by dehydroxylation of the zeolite, in NO conversion. As a result, it may be concluded that the isolated copper ions near Brönsted sites play a significant role in NO conversion but dimeric or polynuclear copper species are less effective for the reaction.     

Chemical etching op fission tracks in ethylene-tetrafluoroethylene copolymer

The chemical etching of fission tracks in ethylene-tetrafluoro-ethylene copolymer was studied. Etched holes 3000–4000 Å in diameter was recognized by electron microscopy for a film bombarded by fission fragments in oxygen and etched in a 12N sodium hydroxide solution at 125°C. The radial etching rate at 125°C was 6–8 Å/hr, which is less than 17 Å/hr for polyvinylidene fluoride in the same sodium hydroxide concentration at 85°C. The smaller rate is a reflection of the larger chemical resistivity of ethylene-tetrafluoro-ethylene copolymer than polyvinylidene fluoride.     

Effect of high pressure treatment on sarcoplasmic reticulum

Abstract

This paper describes the changes in biochemical activities of sarcoplasmic reticulum(SR) and Ca²⁺ release from SR in the rabbit skeletal muscle subjected to a high pressure treatment(100∽300 MPa) to investigate the mechanism for pressure-induced meat tenderization and acceleration of meat conditioning. Pressure-dependent changes were observed in the both extra and basal ATPase activities of SR prepared from the muscles exposed to high pressure. Ca²⁺ uptaking ability of SR vesicles measured by fluorescent chelating reagent, indo-1, decreased with increasing pressure applied to the muscle. Ultrastructural studies revealed that Ca²⁺ which was mainly localized in the SR region of the untreated fiber bundles was translocated into myofibrils in the pressurized muscle. Obtained results in this report may be one of the causes for meat tenderization and acceleration of meat conditioning induced by high pressure treatment.     

Effect of ultrasonic irradiation on nucleation phenomena in a Na2HPO4.12H2O melt being used as a heat storage material

The effect of ultrasound on nucleation phenomena in the heat storage material Na2HPO4.12H2O was investigated by determining the primary nucleation probability and induction time, and by looking at heat generation phenomena in the initial stage of nucleation. The experimental results show that the primary nucleation probability dramatically increased, and the induction time decreased under the ultrasound irradiation, and in addition, the rate of temperature rise was dependent upon the ultrasonic output. Based on these results and the theoretical relationship between the number of primary nuclei and the heat generation rate, it is proposed that the number of primary nuclei depends upon the ultrasonic output.     

Curved Ferroelectric Liquid Crystal Matrix Displays Driven by Field-Sequential-Color and Active-Matrix Techniques

This paper describes a curved field-sequential-color matrix display using fast-response ferroelectric liquid crystal. Black matrix and transparent electrode patterns were formed on a thin plastic substrate by a transfer method from a glass substrate. While a composite film of liquid crystal and micro-polymers of walls and fibers was formed between the flexible substrates by printing, laminating and curing processes of a solution of monomers and liquid crystal, the mechanical stability was enhanced by use of multi-functional monomers to form large display panels. The image pixels of the matrix panel were driven by an active matrix scheme using an external switch transistor array at a frequency of 180 Hz for intermittent three-primary-color backlight illumination. The flexible A4-paper-sized color display with 24 × 16 pixels and 60 Hz field frequency was demonstrated by illuminating it with sequential three-primary-color lights from light-emitting diodes of the backlight. Our display system is useful in various information displays because of its freedom of setting and location.     

Molecular scale structure formation by folding

A conception of a structure formation suitable for nano-technology is proposed, which is programmable and suitable for mass production-like lithography. This conception utilizes the controlled folding of chains like the scan-lines of television. Its possibility and property were studied theoretically using the modeled chains consist of beads. By adopting the interaction among the beads which can distinguish the kind of the partner by its polarity and is chiral to break the chiral symmetry of the folded state, the special chains which have the unique ground states could be designed. In these ground states, the chains are folded like the scan-lines of television. The thermodynamic properties of the suggested chains were studied by the Monte Carlo simulations and the suggested chains showed the phase-transition-like behavior which is distinct compared to both the random chains and the chain that has only the non-specific attraction. The size dependence and the effects of adding the non-specific attraction and modifying the border of the folded conformation were also studied.     

Synthesis of cycl[3.2.2]azine and benzo[g]cycl[3.2.2]azine derivatives by use of the [2 + 8] cycloaddition reaction of indolizines and dimethyl acetylenedicarboxylate

The reaction of 1-ethoxycarbonylmethylpyridinium bromides 5a-k with nitro ketene dithioacetal, 1,1-bis-(methylthio)-2-nitroethylene ( 2 ), in the presence of triethylamine in ethanol gave the desired ethyl 2-methyl-thioindolizine-3-carboxylates 3a-k in good yields, along with ethyl 2-methylthio-1-nitroindolizine-3-carboxyl-ates 4a-d . Deesterification of 3 using sodium hydroxide in methanol followed by treatment with polyphosphoric acid gave the corresponding 2-methylthioindolizines 5a-d in good yields. The desulfurization of 5 with Raney-nickel in ethanol occurs smoothly to give the 1,2,3-unsubstituted indolizines 6a-c (a , parent indolizine; b , 8-methylindolzine; c , 6,8-dimethylindolizine). Similarly, pyrrolo[2,1-a]isoquinoline ( 19 ) was also synthesized. These indolizine and pyrrolo[1,2-a]isoquinoline derivatives were allowed to react with dimethyl acetylene to give the corresponding cycl[3.2.2]azine and benzo[g]cycl[3.2.2]azine derivatives in good results.     

A CO Adsorption Site Change Induced by Copper Substitution in a Ruthenium Catalyst for Enhanced CO Oxidation Activity

Ru is an important catalyst in many types of reactions. Specifically, Ru is well known as the best monometallic catalyst for oxidation of carbon monoxide (CO) and has been practically used in residential fuel cell systems. However, Ru is a minor metal, and the supply risk often causes violent fluctuations in the price of Ru. Performance‐improved and cost‐reduced solid‐solution alloy nanoparticles of the Cu‐Ru system for CO oxidation are now presented. Over the whole composition range, all of the Cu_xRu_1?x nanoparticles exhibit significantly enhanced CO oxidation activities, even at 70 at % of inexpensive Cu, compared to Ru nanoparticles. Only 5 at % replacement of Ru with Cu provided much better CO oxidation activity, and the maximum activity was achieved by 20 at % replacement of Ru by Cu. The origin of the high catalytic performance was found as CO site change by Cu substitution, which was investigated using in situ Fourier transform infrared spectra and theoretical calculations.