Evaluation of mass transfer rate during Ziegler-Natta propylene polymerization

Mass transfer which affects the rate of propylene polymerization with titanium trichloride–triethylaluminum, has been evaluated by use of a new method developed for this heterogeneous reaction. The polymerization was carried out with the usual flask reactor equipped with a paddle stirrer; the rate of gas absorption into the polymerization slurry was proportional to stirring speed and the reciprocal of the total amount of polymers produced. It has been confirmed that the polymerization rate separated from the absorption rate is purely kinetic (propagation), and an effective physical process, such as monomer transfer through a polymer film covering the catalyst surface, no longer exists.     

Evolved gas detection of iron oxyhydroxides

A procedure is described for recording evolved gas detection (thermal desorption spectra) of various FeOOH samples up to 400°. Characteristic curves of -,- and-FeOOH are discussed, based on the crystallographic structure which governs the sites for physisorbed H₂O as well as OH groups producing H₂O by dehydration. Examinations are also made of the variations of the desorption spectra with the progress of crystallization for -FeOOH, and with the distortion of the crystal structure caused by the addition of Cu(II) to -, - and-FeOOH.     

The inclusion complex of piromidic acid with dimethyl-β-cyclodextrin in aqueous solution and in the solid state

Inclusion complex formation of piromidic acid (PA) with dimethyl--cyclodextrin (DM--CD) in aqueous solution and in the solid state was confirmed by the solubility method, differential scanning calorimetry (DSC) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy. The apparent stability constant,K _c , of the complex was estimated to be 244 M^–1. The stoichiometry of the complex was given as the ratio 1:2 of PA to DM--CD. The dissolution rate of the PA/DM--CD complex was much greater than that of intact PA.Presented at the Fourth International Symposium on Inclusion Phenomena and the Third International Symposium on Cyclodextrins, Lancaster, U.K., 20–25 July 1986.     

Diastereoselective allylations of allyl-propargyl hybrid cations: synthesis of conjugated 1,5-dien-7-yne frameworks bearing C(4)-stereogenic centers

[reaction: see text] Chiral C(4)-substituted (E)- or (Z)-1-alkynyl-1-trimethylsilyloxy-2-butene systems provide anti-(Z) or syn-(Z) conjugated dienyne, with a very high level of stereocontrol, on treatment with BF(3).OEt(2) in CH(2)Cl(2) at -50 degrees C in the presence of allyltrimethylsilane. The Cieplak conformation for (E)-substrates and neighboring-group participation for (Z)-substrates are considered to be responsible for the stereochemical consequences.     

Catalytic transformation of methane over in-loaded ZSM-5 zeolite in the presence of ethene

Methane is shown to react with ethene over In-loaded ZSM-5 to higher hydrocarbons such as propene and toluene at around 673 K. Such methane conversion is not catalyzed by proton-exchanged ZSM-5 (H-ZSM-5) under the same conditions, only C2H4 being converted to higher hydrocarbons. By using 13C-labeled methane (13CH4) as a reactant, the reaction paths for the formation of propene, benzene and toluene were examined. 13C-labeled propene (13CC2H6) is formed by the reaction of 13CH4 with C2H4. The lack of 13C-labeled benzene revealed that propene is not transformed to benzene, which instead originates entirely from C2H4. The 13C atom is inserted both into the methyl group and benzene ring in the toluene formed. This indicates that toluene is formed by two reaction paths; the reaction of 13CC2H6 with butenes formed by the dimerization of C2H4 and the reaction of benzene with 13CH4. The existence of the latter path was proved by the direct reaction of 13CH4 with benzene. The reaction of methane with benzene was also carried out in a continuous flow system over In-loaded ZSM-5. The reaction afforded 7.6% and 0.9% yields of toluene and xylenes, respectively, at 623 K.     

Evaluation of the adsorption affinity of proteins to calcium hydroxyapatites by desorption and pre-adsorption methods

The adsorption affinity of bovine serum albumin (BSA) and lysozyme (LSZ) to calcium hydroxyapatite (CaHAP) was evaluated by desorption and two step adsorption methods. These experiments were carried out at 15°C in a 1×10⁻⁴ mol dm⁻³ KCl solution of pH 6.0. BSA molecules were scarcely desorbed, exhibiting an irreversible adsorption of BSA, though LSZ slightly desorbed. This result supports our previous findings that LSZ adsorbs weakly onto phosphate ions exposed on ac or bc faces of CaHAP while BSA adsorbs strongly onto positively charged sites on ac or bc faces of CaHAP. The amount of adsorbed LSZ was markedly increased by the pre-adsorption of BSA, where LSZ was adsorbed onto BSA-covered CaHAP. On the other hand, the amount of adsorbed BSA was not changed by the pre-adsorption of LSZ. In both pre-adsorption systems it was confirmed by an HPLC method that no protein molecule pre-adsorbed was desorbed after the post-adsorption procedure. Therefore, it was interpreted that the enhancement of adsorption of positively charged LSZ is induced by an electrostatic attractive force through pre-adsorption of negatively charged BSA molecules with a high coverage. However, since the coverage of LSZ onto CaHAP is considerably low, no stimulation of BSA adsorption occurred on the LSZ-covered surface. The formation of double protein adsorbed layers consisting of pre- and post-adsorbed proteins was proposed.     

Preparation of Titania from Tetrakis(diethylamino)titanium via Hydrolysis

The conversion of tetrakis(diethylamino)titanium (Ti(NEt₂)₄) into titania via either a combination of hydrolysis (Ti(NEt₂)₄ : THF : H₂O = 1 : 10 : x, x = 2, 4, 10) at ambient conditions and calcination (method A) or hydrolysis in a water-tetrahydrofuran (THF) mixture (Ti(NEt₂)₄ : THF : H₂O = 1 : 10 : 100) at reflux (method B) was investigated. Titanium tertiary butoxide (Ti(O ^t Bu)₄) was also used as a substitute for Ti(NEt₂)₄. The hydrolysis via method A resulted in the formation of amorphous solids containing organics. Thermal analyses showed that the hydrolysis products showed mass losses up to 500°C probably due to the presence of diethylamine (Et₂NH) formed via the hydrolysis of Ti(NEt₂)₄ in the hydrolysis products, while a mass loss of the hydrolysis product from Ti(O ^t Bu)₄ was completed up to about 200°C. After calcination at 600°C, anatase or a mixture of anatase and rutile was obtained. The crystallization behavior of the hydrolysis products from Ti(NEt₂)₄ was different from that of the hydrolysis product from Ti(O ^t Bu)₄. The hydrolysis via method B gave only an amorphous material from Ti(NEt₂)₄, while a crystalline titania (anatase and brookite) formed from Ti(O ^t Bu)₄.     

Nitrogen adsorption on fluorinated activated carbon fiber

Nitrogen adsorption isotherms for fluorinated activated carbon fiber (F-ACF) and fluorinated carbon black (F-CB) were measured at 77 K. Surface structures of F-ACF and F-CB were examined by _s -plot analysis using the adsorption data on the nonporous carbon black (CB) and F-CB. The surface energy of F-ACF was lower than that of ACF. The micropore structure of ACF was preserved even after fluorination, although the limiting adsorption amount and the micropore width decreased with fluorination.     

Polymerization of (o-methylphenyl)acetylene and polymer characterization

(o-Methylphenyl)acetylene polymerized with high yields in the presence of W and Mo catalysts. W catalysts were more active than the corresponding Mo catalysts. The weight-average molecular weight of the polymer formed with W(CO)₆–CCl₄–hv reached 8 × 10⁵, being higher than the maximum value (ca. 2 × 10⁵) for poly(phenylacetylene). The polymer had the structure $\rlap{--} [{\rm CH} \hbox{=\hskip-1pt=} {\rm C}(o - {\rm CH}_3 {\rm C}_6 {\rm H}_4 )\rlap{--} ]_n $. The stereochemical structure of the main chain could be determined by ¹³C-NMR; the cis content varied in a range of 41–61% depending on the polymerization conditions. The present polymer was thermally more stable than poly(phenylacetylene) according to thermogravimetric analysis. Interestingly, this polymer possessed deeper color than poly(phenylacetylene), and showed a fairly strong absorption in the visible region.