Carbon sources of natural cyanamide in Vicia villosa subsp. varia

The 13C labels of [13C]carbon dioxide and D-[13C?]glucose were incorporated into cyanamide (NH?CN) when they were administered to Vicia villosa subsp. varia shoots. In contrast, the administration of sodium [2,3-13C?]pyruvate did not affect the relative area of the [M + 1]+ ion of cyanamide in the gas chromatography-mass spectrometry analysis. [2,3-13C?]pyruvate was incorporated into organic acids that are part of the citric acid cycle, such as succinate and fumarate, confirming that the shoots absorbed and metabolised it. These observations demonstrated that the carbon atom of cyanamide is derived from any of the carbohydrates that are present upstream of pyruvate in the metabolic pathway.     

Modular Synthesis of Polybenzo[b]silole Compounds for Hole‐Blocking Material in Phosphorescent Organic Light Emitting Diodes

A diversity‐oriented synthetic strategy allowed us to design a series of conjugated molecules containing multiple benzosilole units that can be utilized as efficient hole‐blocking materials for phosphorescent organic light emitting diodes (OLEDs). Some of these compounds showed a performance surpassing that of the current standard, bathocuproine. The new compounds were easily synthesized in a modular fashion from a previously reported 3‐stannyl benzosilole building unit. Studies on the properties of these compounds in solution and in the solid state indicate that they possess high electron affinity, high ionization potential, and form stable amorphous films that show high electron‐drift mobility. The correlation between their molecular properties and the efficiency of the OLED device performance is also investigated.     

One-pot hydrothermal synthesis of an assembly of magnetite nanoneedles on a scaffold of cyclic-diphenylalanine nanorods

The assembly of metal oxide nanoparticles (NPs) on a biomolecular template by a one-pot hydrothermal synthesis method is achieved for the first time. Magnetite (Fe₃O₄) nanoneedles (length: ~100 nm; width: ~10 nm) were assembled on cyclic-diphenylalanine (cFF) nanorods (length: 2–10 μm; width: 200 nm). The Fe₃O₄ nanoneedles and cFF nanorods were simultaneously synthesized from FeSO₄ and l-phenylalanine by hydrothermal synthesis (220 °C and 22 MPa), respectively. The samples were analyzed by powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (IR), transmission electron microscopy (TEM), and superconducting quantum interference device (SQUID) magnetometry. Experimental results indicate that Fe₃O₄ nanoneedles were assembled on cFF nanorods during the hydrothermal reaction. The composite contained 3.3 wt% Fe₃O₄ nanoneedles without any loss of the original magnetic properties of Fe₃O₄.     

Effect of cation doping on ionic and electronic properties for lanthanum silicate-based solid electrolytes

Electronic as well as ionic conducting properties for oxyapatite-type solid electrolytes based on lanthanum silicate, La_9.333 + xSi₆O_26 + 1.5x (LSO) were investigated in the oxygen-excess region (x > ca. 0.3). We have found that the oxygen excess-type LSO (OE-LSO), namely La₁₀Si₆O₂₇ on weighted basis, exhibited high conductivity, and substitution of the Si-site of LSO with some dopants (Mⁿ⁺) had a positive effect toward the conducting property. Furthermore, it was also found that addition of a very small amount of iron ions into the M-doped OE-LSO, La₁₀(Si_6-yMⁿ⁺_y)O_27-(2-0.5n)y, improved its conductivity. On the other hand, replacement of the La-site with various ions for La₁₀(Si_6-yMⁿ⁺_y)O_27-(2-0.5n)y did little to improve conductivity. The electronic transport numbers for Al-doped OE-LSO with Fe-addition, (1-α){La₁₀(Si_5.8Al_0.2)O_26.9}-α(FeO_γ), evaluated with the Hebb-Wagner polarization method were very low: i.e., 1.1 × 10^− 3 and 2.9 × 10^− 3 under P(O₂) = 1.1 × 10⁴ Pa at 1073 K for α = 0.00 and 0.005, respectively. Conductivity for each sample was unchanged under humidified atmosphere at 1073 K sustained for over 50 h, revealing that both compositions were chemically stable. It was concluded that 0.995{La₁₀(Si_5.8Al_0.2)O_26.9}-0.005(FeO_γ) is suitable for the fuel cell electrolytes because of its high and almost pure ionic conductivity, and its good chemical stability under humidified as well as reducing conditions.     

A case of Budd-Chiari syndrome: Gd-EOB-DTPA-enhanced MR findings

Budd-Chiari syndrome (BCS) is a rare disorder caused by the obstruction of hepatic venous outflow, leading to sinusoidal congestion, ischemic injury to liver cells and portal hypertension. Long-term survival largely depends on whether hepatocellular carcinoma occurs. A recently available liver-specific contrast medium, gadolinium-ethoxybenzyl-diethylenetriamine penta-acetic acid (Gd-EOB-DTPA), reportedly has high diagnostic capability for detection of malignant liver tumors. However, there has been no report of the sue of Gd-EOB-DTPA-enhanced magnetic resonance imaging (MRI) for BCS. We present a case of chronic BCS who underwent both gadopentetate dimeglumine (Gd-DTPA) and Gd-EOB-DTPA-enhanced MRI. Hepatic congestion and edema were seen as slightly hypointense areas on Gd-EOB-DTPA-enhanced hepatobiliary-phase images, although these areas were observed as slightly hyperintense on previously obtained Gd-DTPA-enhanced delayed-phase image. Reduced uptake of Gd-EOB-DTPA by hepatocytes in the region of congestion or edema may account for this difference, which should be recognized in image interpretations.     

Effective synthesis of diiodinated picene and dibenzo[a,h]anthracene by AuCl-catalyzed double cyclization

6,13-Diiododibenzo[a,h]anthracene and 5,8-diiodopicene were synthesized by AuCl-catalyzed double cyclization. The highly selective reaction yielded a new class of peri-halogenated fused aromatics.     

Synthesis and properties of high‐molecular‐weight stereo di‐block polylactides with nonequivalent D/L ratios

Di‐stereoblock polylactides (di‐sb‐PLA: PLLA‐b‐PDLA) having high molecular weight (M_n > 100 kDa) were successfully synthesized by two‐step ring‐opening polymerization (ROP) of L ‐ and D ‐lactides using tin(2‐ethylhexanoate) as a catalyst. By optimizing the polymerization conditions, the block sequences were well regulated at non‐equivalent feed ratios of PLLA and PDLA. This synthetic method consisted of three stages: (1) polymerization of either L ‐ or D ‐lactide to obtain a PLLA or PDLA prepolymer with a molecular weight less than 50 kDa, (2) purification of the obtained prepolymer to remove residual lactide, and (3) polymerization of the enantiomeric lactide in the presence of the purified prepolymer. Their ¹³C and ³¹P NMR spectra of the resultant di‐sb‐PLAs strongly supported their di‐stereo block structure. These di‐sb‐PLAs, having weight‐average molecular weights higher than 150 kDa, were fabricated into polymer films by solution casting and showed exclusive stereocomplexation. The thermomechanical analysis of the films revealed that their heat deformation temperature was limited probably because of their low crystallinity owing to the non‐equivalent PLLA/PDLA ratio. The blend systems of the di‐sb‐PLAs having complementary stereo‐sequences (the one with a long PLLA block and the other with long PDLA block) were also prepared and characterized to enhance the sc crystallinity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 794–801, 2010     

Fracture theory based on the concept of characteristic fracture length of materials

Fracture theory is a classic, but not a well-dealt with, difficulty in solid mechanics. This paper has proposed the concept of characteristic fracture length of materials from the fact that fracture happens with area failure rather than point failure in materials. A unified theory is then proposed, which can be applied both to smooth and defected materials (whether with micro or macro defects). Brittle fracture tests with specimens of different sizes of holes are carried out to examine the fracture theory. It is found that the fracture stresses obtained by experiments agree well with those predicated by the presented fracture theory. Though the brittle fracture is the focus of the paper, the concept of characteristic length can be easily extended to fatigue or other failure problems.     

Structure and morphology of the aliphatic polyester poly(δ‐valerolactone) in solution‐grown,chain‐folded lamellar crystals

Poly(δ‐valerolactone) (PVL) crystals in the form of chain‐folded lamellae were prepared by isothermal crystallization from a 2‐methylbutane‐2‐ol solution. Wide‐angle and small‐angle X‐ray diffraction data, obtained from PVL lamellae sedimented to form oriented mats, were supplemented with morphological and structural data from electron microscopy, both imaging and diffraction. The diffraction signals index on an orthorhombic unit cell with the parameters a = 0.747 ± 0.002 nm, b = 0.502 ± 0.002 nm, and c (chain axis) = 0.742 ± 0.002 nm. Similar unit cell parameters were obtained from crystals grown from 1‐octanol and also from drawn melt‐pressed films. The evidence supports a model containing two antiparallel chain segments in the unit cell. The c value of 0.742 nm is appropriate for an all‐trans or onefold helical backbone conformation for the straight stems. Possible slight perturbations at the ester units from the all‐trans backbone conformation are discussed. Computerized modeling was used to optimize the adjacent‐reentry folded structure. The setting angles, with respect to the a axis, are ±58° for the corner and center chains. The lamellae are 7.26 ± 0.05 nm thick, and the chains run orthogonal to the lamellar surface. The chains fold in the diagonal (110) and (11¯0) planes in an alternating fashion. The X‐ray diffraction data suggest that a proportion of adjacent paired antiparallel entities, or hairpin units, are c‐axis‐sheared, and a relationship to the results obtained from drawn films is discussed. A brief comparison is also made with related polymer structures. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2622–2634, 2001