Study of flow rate in pressurized gradient capillary electrochromatography using splitter and separation of peptides using an Amide stationary phase

A pressurized gradient capillary electrochromatograph using a splitter was constructed. The variation in flow rate during gradient elution was investigated and separations of peptides using an Amide stationary phase were demonstrated. The flow rate, which is one of the important factors to control chromatographic behavior, was increased during the gradient elution, and the mismatching of mobile phase between the column and the resistance tubing derived three variation patterns in the flow rate. The electrophoretic migration in electrochromatography could enhance in separation of peptides. The separated peak number of tryptic digest of bovine serum albumin was increased from 30 to 40 by the application of +5 kV.     

Exploratory Investigations Probing a Preparatively Versatile, Pyridinium Salt Photoelectrocyclization-Solvolytic Aziridine Ring Opening Sequence

A novel pyridinium salt photoelectrocyclization-nucleophilic bicyclic aziridine ring opening reaction sequence has been investigated in order to determine its preparative potential. N-Alkylpyridinium perchlorates were found to undergo photoinduced electrocyclization upon irradiation in nucleophilic solvents, such as H(2)O and MeOH, to efficiently produce 6-alkyl-6-azabicyclo[3.1.0]hex-2-en-4-yl alcohols and ethers. The bicyclic aziridine photoproducts react with a number of different nucleophiles (e.g., H(2)O, MeOH, AcOH, AcSH) under acid-catalyzed conditions to produce 5-(nucleophile-substituted)-4-(alkylamino)cyclopenten-3-yl alcohols and ethers. The aziridine ring opening processes are both regioselective and stereoselective, yielding trans,trans-trisubstituted cyclopentenes exclusively, apparently as a consequence of the operation of an SN(2) mechanism. The effects of C-alkyl substitution on the regiochemistry of the pyridinium cation photocyclization reaction were briefly probed, and a method was developed to produce trans,cis-trisubstituted cyclopentenes by use of this tandem preparative sequence.     

Efficiency of radiation-induced main-chain scission of poly (methyl methacrylate) depends on the irradiation temperature because of coexisting monomer

Effect of irradiation temperature on the main-chain scission of poly (methyl methacrylate) (PMMA) caused by γ-irradiation was studied by means of gel permeation chromatography and ESR spectroscopy. Although no temperature dependency was observed on the scission efficiency for purified PMMA, the efficiency for crude or monomer-doped purified PMMA was decreased by decreasing the temperature below ca. 200 K. Above 200 K the efficiency was constant and did not depend on the purity of PMMA. ESR study of the irradiated PMMA revealed that the suppression of the scission below 200 K is induced by the addition of methyl methacrylate monomer to primary radical species, which otherwise cause the main-chain scission by warming the polymer above 200 K. The primary radical generated above 200 K immediately converts to the scission-type ? CH₂ ? ?(CH₃) COOCH₃ radical through the β-scission of the polymer main chain, so that the efficiency of the scission does not depend on both the impurity and the irradiation temperature. © 1994 John Wiley & Sons, Inc.     

Epoxyquinol A, a highly functionalized pentaketide dimer with antiangiogenic activity isolated from fungal metabolites

A unique pentaketide dimer structure of a novel fungal metabolite with antiangiogenic activity, designated as epoxyquinol A (1), was determined on the basis of NMR spectral data as well as the X-ray crystallographic analysis. 1 inhibits the endothelial migration induced by vascular endothelial growth factor (ED100 = 3 mug/mL).     

Carbapenem and penem antibiotics. V. Synthesis and antibacterial activity of 2-functionalized-methyl 1-methylcarbapenems related to asparenomycins

The synthesis of 1 alpha- and/or 1 beta-methylcarbapenems, 2-unsubstituted and 2-(5-methyl-1,3,4-thiadiazol-2-yl)thiomethyl derivatives having a 1-(hydroxy)methylethylidene or cyclic carbonate side chain at the C-6 position, is described. The in vitro antibacterial activities of these compounds and their corresponding 1-unsubstituted carbapenems are compared.     

A brief study of the supercritical fluid chromatographic behavior of lanthanide β-diketonates

The chromatographic behaviors of lanthanide chelates of acetylacetone (ACAC), trifluoroacetylacetone (TFA), thenoyltrifluoroacetone (TTA), dipivaloylmethane (THD), 6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octanedione (FOD), and the thenoyltrifluoroacetonepyridine (TTA·Py) adduct were investigated using packed column supercritical fluid chromatography. Mobile phases consisting of neat and alcohol modified CO₂ were used with a phenyl packed stationary phase. Lanthanide complexes of ACAC, THD, and FOD were shown to have better chromatographic performance compared to the corresponding chelates with TFA, TTA, and TTA·Py. In particular, TTA complexes such as Eu(TTA)₃ showed characteristic thermal decomposition in the mobile phase at elevated temperature. In addition, retention behavior was found to be a temperature dependent function of volatility and solubility for all chelates studied.     

all-Z-Tetrabenzo

Crystal structures of the silver complexes derived from tetrabenzo[16]annulene with AgOTf and AgClO(4) are different, although these two complexes show similar (1)H NMR spectra reflecting a similar clathrate structure in solution. The silver complex of pentabenzo[20]annulene with AgClO(4) adopts a clathrate structure both in the solid state and in solution.     

Stereoselective synthesis of (Z)-2-fluoro-1-alkenyl(phenyl)iodonium tetrafluoroborates

[reaction: see text] (Z)-2-Fluoro-1-alkenyl(phenyl)iodonium salts were stereoselectively prepared by the reaction of alkynyl(phenyl)iodonium salts with aqueous HF in good yields. The method is applicable to the synthesis of fluoroalkenyliodonium salts having functional groups such as ketone, ester, and chloride. (Z)-2-Fluoro-1-alkene, (Z)-2-fluoro-2-alkenoate, and (Z)-beta-fluoroenyne could be stereoselectively prepared from the fluoroalkenyliodonium salt.     

Fabrication of polymer Langmuir-Blodgett films containing regioregular poly(3-hexylthiophene) for application to field-effect transistor

Semiconducting thin films consisting of regioregular poly(3-hexylthiophene) (RR-PHT) and poly(N-dodecylacrylamide) (pDDA) were constructed by the Langmuir-Blodgett (LB) technique. A mixture of RR-PHT and pDDA spread from a chloroform solution on a water surface forms a stable monolayer, which can be transferred onto solid substrates by the LB method, yielding a well-defined polymer LB film. Surface morphology studies of the LB film indicate that the RR-PHT is dispersed uniformly throughout the surface. The polymer thin film was chemically doped by contacting with FeCl3 acetonitrile solution, and a conductivity of 5.6 S/cm was achieved. Further, the LB film was utilized as the semiconducting film in the field-effect transistor (FET), and mobilities of 2.2 x 10(-4) and 4.4 x 10(-4) cm2 V(-1) s(-1) were obtained by analyzing the saturated and linear regions of the current-voltage characteristic, respectively.     

Phase morphology of hydrolysable polyurethanes derived from aqueous dispersions

Biodegradable polyurethanes are an interesting alternative to many applications that involve plastics since they can minimize environmental problems caused by the low rates of natural degradation of synthetic polymers. In addition, since waterborne polyurethanes are based on aqueous dispersions, they restrict the use of organic solvents during processing and application of the polymer, thus contributing furthermore to reduce environmental damage. In this work, aqueous anionic polyurethane dispersions (PUD) with tailorable susceptibility for hydrolysis were synthesized by progressively replacing polypropylene glycol (PPG) with a biodegradable polycaprolactone diol (PCL) as soft segments. The hard segments were formed by extending isophorone diisocyanate (IPDI) with hydrazine (HZ). Dimethylol propionic acid (DMPA) was used as ionic center and triethyl amine (TEA) as neutralizer. The degree of phase separation was evaluated mainly by infrared spectroscopy (FTIR) and small angle X-ray scattering (SAXS). The results indicated that phase separation between hard and soft segments of poly(ester-urethane) is more significant than that of poly(ether-urethane). Data obtained from SAXS experiments indicated that phase separation within soft domains can also be present in samples containing both polyester and polyether soft segments. Hydrolytic degradation of the polymers in buffer solution of pH 7.4 and alkaline solution was performed as an initial test. The results showed that the fraction of polyester soft segments in the polyurethanes can be used to tailor the susceptibility of the materials to hydrolytic attack. Polyurethanes having higher contents of polyester were more promptly hydrolytically degraded than polyurethanes containing only polyether segments.