Hydrofluoroarylation of alkynes with fluoroarenes

A combination of Ni(cod)(2) and PCyp(3) is found to be an effective catalyst for chemoselective activation of the C-H bond of fluoroarenes over C-F bonds followed by insertion of alkynes to allow direct alkenylation of the electron-deficient arenes. The characteristics of the reactions are: a C-H bond ortho to a fluorine substituent is selectively activated; the reactivity of fluorobenzenes is roughly proportional to the number of fluorine atoms. The reaction conditions tolerate a broad range of both alkynes and fluoroarenes containing both electron-withdrawing and -donating groups, thus allowing efficient synthesis of a variety of substituted ethenes containing a fluoroaryl motif in high regio- and stereoselective manners. Mechanistic studies including both labeling experiments and stoichiometric reactions reveal that oxidative addition of C-H bonds in fluoroarenes to nickel(0) is kinetically highly facile whereas that of C-F bonds is thermodynamically favoured.     

Optimization of simulated moving bed chromatography with fractionation and feedback: Part II. Fractionation of both outlets

A new improvement based on outlet fractionation and feedback has been developed for simulated moving bed (SMB) chromatography. In this contribution, this fractionation and feedback SMB (FF-SMB) concept is extended to the general scenario which integrates a simultaneous fractionation of both outlet streams. A model-based optimization approach, previously adopted to investigate single fractionation, is extended to consider this flexible fractionation policy. Quantitative optimization studies based on a specific separation problem reveal that the double fractionation is the most efficient operating scheme in terms of maximum feed throughput, while the two existing single fractionation modes discussed in our previous study are also significantly superior to the conventional SMB operation. The advantages of the double fractionation extension are further demonstrated in terms of several more detailed performance criteria. In order to evaluate the applicability of the fractionation and feedback modification, the effect of product purity, adsorption selectivity, column efficiency and column number on the relative potential of FF-SMB over SMB is examined.     

Experimental investigation on reversal of secondary Bjerknes force between two bubbles in ultrasonic standing wave

The direction of the secondary Bjerknes force between a free bubble and an attached bubble was experimentally investigated. The behavior of the two bubbles in an ultrasonic standing wave of 27 kHz was observed using an imaging system with a high-speed video camera. It was demonstrated experimentally that the direction of the force reversed at a specific separation distance between the two bubbles, which was defined as the threshold distance. The threshold distance changed with the radius of the attached bubble. In addition, a theoretical calculation was performed using a previously derived model that coupled the vibrations of two free bubbles [Ida, Phys. Lett. A 297, 210-217 (2002)]. The experiment data for the threshold distance qualitatively agreed with the theoretical predictions, except when the separation distance was very small. Then, it was discovered that the free bubble became trapped near the attached bubble when the separation distance between the two bubbles was very small. This indicated that a stable equilibrium point for the separation distance exists that cannot be predicted by the theoretical model.     

Evolution of the Kondo effect in a quantum dot probed by shot noise

We measure the current and shot noise in a quantum dot in the Kondo regime to address the nonequilibrium properties of the Kondo effect. By systematically tuning the temperature and gate voltages to define the level positions in the quantum dot, we observe an enhancement of the shot noise as temperature decreases below the Kondo temperature, which indicates that the two-particle scattering process grows as the Kondo state evolves. Below the Kondo temperature, the Fano factor defined at finite temperature is found to exceed the expected value of unity from the noninteracting model, reaching 1.8±0.2.     

基于MPS方法的汽泡凝结数值模拟研究

采用移动粒子半隐式(MPS)方法对静止过冷水中单个汽泡的凝结现象进行了数值模拟,研究了不同初始压力和初始直径时饱和蒸汽汽泡凝结过程,获得了凝结过程中汽泡形状、当量直径和压力的变化规律;汽泡初始压力为0.1～0.5MPa,初始直径为2mm、3mm和5mm;过冷水压力为0.1MPa,温度为70℃。结果表明两相界面不存在压差时,凝结过程中汽泡始终保持球形,汽泡当量直径逐渐减小,压力近似不变;相界面存在压差时,凝结过程中汽泡从球形逐渐变为心形、半月形,汽泡当量直径和压力会出现周期性振荡,且初始压力越大振荡幅度越大。     

Precise synthesis of a series of poly(4‐n‐alkylstyrene)s and their glass transition temperatures

Poly(4‐n‐alkylstyrene)s with six kinds of n‐alkyl groups such as methyl, ethyl, propyl, butyl, hexyl, and octyl groups covering wide molecular weight range from around 5 k to over 100 k were precisely synthesized by living anionic polymerizations. It was confirmed that all the polymers obtained have narrow molecular weight distribution, that is, M_w/M_n is all less than 1.1, by SEC. T_gs of all the polymers were estimated by DSC measurements and it turned out to be clear that their molecular weight dependence was well described by the Fox–Flory equations. Furthermore, it is evident that T_g monotonically decreases as a number of carbon atoms of n‐alkyl group is increased, though T_g values are all 20 K or more higher than those reported previously for the same polymer series. This is because backbone mobility increases by introducing longer n‐alkyl side groups with high mobility, while T_g difference in between this work and the previous one may due to the experimental conditions and also to the molecular weight range adopted. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 757–763     

Substrate-assisted laser patterning of indium tin oxide thin films

Maskless laser patterning of indium tin oxide (ITO) thin films was studied by the use of a diode-pumped Q-switched Nd:YLF laser. The ITO films were sputter-deposited either on lime glass, the standard substrate material for flat panel display applications, or fused quartz so that the efficiency of laser patterning as a function of substrate absorption could be studied. The laser wavelength was varied among infrared (5=1047 nm), visible (5=523 nm), and ultraviolet (5=349 nm and 5=262 nm). It is observed that strong light absorption by the substrate is a crucial requirement for a residue-free patterning of the ITO film. Observations and numerical calculations of the laser-induced surface temperature indicate that material removal occurs via thermal vaporization and that other mechanisms such as photochemical decomposition or spallation can be neglected.     

Steady-State and Time-Resolved Fluorescence Spectroscopic Studies on Interaction of the N-terminal Region with the Hairpin Loop of the Phytocystain Scb

The steady-state and time-resolved fluorescece spectroscopy is one of the most powerful method to detect and analyze subtle conformation change and interaction between peptide elements in protein. Phytocystatin Scb isolated from sunflower seeds includes a single Trp residue at position 85. In an attempt to investigate the interaction of the N-terminal region of Scb with the first and second hairpin loops by fluorescence spectroscopy of Trp residue, two Scb mutants in which single Trp locates at position 52 and 58, respectively, and their N-terminal removed mutants were generated. The N-terminal truncation changed the fluorescence decay kinetics of Trp52 from the triple exponential to double. Furthermore, the time-resolved fluorescence anisotropy residue indicated that the segmental motion of Trp52 was significantly enhanced by its N-terminal truncation. In contrast, Trp58 and Trp85 had little influence. The N-terminal successive truncations of Scb and its mutants resulted in the weaken inhibitors to papain. These results suggested that the N-terminal region of Scb interacts with the peptide segment preceding the first hairpin loop, thereby stabilizing the conformation of the hairpin loop structure.     

Bit-rate Flexible Picosecond Pulse Width Conversion with All-optical Mono-stable Multivibrator Laser Diode

An optical mono-stable multivibrator laser diode (MM-LD) is realized by using a multi-electrode distributed feedback laser diode. All-optical pulse-width conversion of ultra-short pulses to non-return-to-zero (NRZ) is achieved using an MM-LD. The MM-LD is adopted for a wide range of bit-rates between 2-10 Gbit/s by tuning the DC bias. Data format transformation from 10-Gbit/s return-to-zero optical signals to NRZ optical-signals is achieved with error free operation. Converted optical signals, which have a narrower spectral bandwidth and lower peak power than when input, are transmitted using a 1.3-μm zero dispersion fiber (1.3Aλ₀-SMF).     

Surfactant gel adsorption of platinum(II), (IV) and palladium(II) as chloro-complexes and kinetic separation of palladium from platinum using EDTA.

A micellar solution of cetylpyridinium chloride (CPC) can separate into two phases due to a temperature change or to the addition of salts. Platinum(II), (IV) and palladium(II) reacted with chloride ions to form stable anionic complexes of PtCl4(2-), PtCl6(2-) and PdCl4(2-), respectively, and were adsorbed onto the CPC gel phase. The CPC phase plays the role of an ion-exchange adsorbent for the anionic complexes. By such a procedure, the precious metals of platinum and palladium could be separated from base metals such as copper, zinc and iron. The kinetic separation was performed by a ligand exchange reaction of the palladium(II) chloro-complex with EDTA at 60 degrees C. The anionic palladium(II)-EDTA complex could not bind the opposite charged CP+ and was desorbed from the CPC phase. In the aqueous phase, the recovery of palladium(II) by the double-desorption was 101.1 +/- 1.2%. The platinum(II) and (IV) chloro-complexes were stable for at least 30 min and remained in the CPC phase.