Novel fluoride transfer in the reaction of tricyclic epoxides with boron trifluoride

Reaction of the tricyclic epoxides ($\text{1a}$) and ($\text{1b}$) with boron trifluoride etherate leads to fluorohydrins ($\text{2a}$) and ($\text{2b}$) derived in the novel fluoride transfer, whereas ($\text{1c}$) undergoes isomerization to spiro ketone ($\text{3}$).     

Role of the special pair in the charge-separating event in photosynthesis

We synthesized special-pair/electron-acceptor systems consisting of a complementary slipped cofacial dimer of imidazolyl-substituted zinc porphyrin, bearing pyromellitdiimide as the electron acceptor. In the case of the dimer, the first and second oxidation potentials were split into a total of four peaks in the differential pulse voltammetry measurement. Furthermore, the shift values of the first oxidation potentials obtained by changing the solvent polarity for the dimer were almost half of those observed for the monomer. These results indicate that the radical cation is delocalized over the whole pi system of the dimer. Time-resolved transient absorption measurements revealed that, relative to the corresponding monomer, the dimer accelerated the charge separation rate, but decelerated the charge recombination rate. The smaller reorganization energy of the slipped cofacial dimer relative to that of the monomeric system demonstrates the significance of the special-pair arrangement for efficient charge separation in photosynthesis.     

Copper-catalyzed addition reaction of γ,γ-dialkoxyallylic zirconium species with imines

In the presence of CuCN, reaction of γ,γ-dialkoxyallylic zirconium species 1 with imines proceeded at the γ-position of 1 to give gem-dialkoxyhomoallylic amines 3 in high yield. In this reaction, γ,γ-dialkoxyallylic zirconium species 1 acts as an α,β-unsaturated acyl anion equivalent.     

Carbon dioxide fixation by microalgae photosynthesis using actual flue gas discharged from a boiler

To mitigate CO₂ discharged from thermal power plants, studies on CO₂ fixation by the photosynthesis of microalgae using actual exhaust gas have been carried out. The results are as follows.

Donor–acceptor–acceptor-type near-infrared fluorophores that contain dithienophosphole oxide and boryl groups: effect of the boryl group on the nonradiative decay

The use of donor–π–acceptor (D–π–A) skeletons is an effective strategy for the design of fluorophores with red-shifted emission. In particular, the use of amino and boryl moieties as the electron-donating and -accepting groups, respectively, can produce dyes that exhibit high fluorescence and solvatochromism. Herein, we introduce a dithienophosphole P-oxide scaffold as an acceptor–spacer to produce a boryl- and amino-substituted donor–acceptor–acceptor (D–A–A) π-system. The thus obtained fluorophores exhibit emission in the near-infrared (NIR) region, while maintaining high fluorescence quantum yields even in polar solvents (e.g. λ_em = 704 nm and Φ_F = 0.69 in CH₃CN). A comparison of these compounds with their formyl- or cyano-substituted counterparts demonstrated the importance of the boryl group for generating intense emission. The differences among these electron-accepting substituents were examined in detail using theoretical calculations, which revealed the crucial role of the boryl group in lowering the nonradiative decay rate constant by decreasing the non-adiabatic coupling in the internal conversion process. The D–A–A framework was further fine-tuned to improve the photostability. One of these D–A–A dyes was successfully used in bioimaging to visualize the blood vessels of Japanese medaka larvae and mouse brain.

Combination of electron-accepting diarylboryl terminal groups and dithienophosphole oxide spacers with electron-donating triarylamine moieties produces donor–acceptor–acceptor type π-systems, which exhibit emissions in the near-infrared region.     

Polymerization of cyclic derivatives of uracil and thymine

Cyclic derivatives of uracil and thymine were synthesized from their corresponding 1-(2′-chloroethyl) derivatives by dehydrochlorination. These compounds were found to undergo a variety of reactions, giving many valuable derivatives of uracil and thymine. The cyclic derivatives, as monomers, were polymerized with a cationic initiator by a unique ring-opening process. The polymerization proceeded by ring opening with isomerization of the pyrimidine ring to give a polymer in which pyrimidine rings were connected with ethylene between N-1 and N-3 or O-4 in the pyrimidine ring. The structure of these polymers was determined by nuclear magnetic resonance (NMR), ultraviolet (UV), infrared (IR), and mass spectra. The structure was affected by polymerization temperature.     

Self-crosslinkable polymers. I. Copolymerization of glycidyl methacrylate with 2-vinylpyridine and 2-vinyl-5-ethylpyridine

A soluble and self-crosslinkable linear copolymer with pendant epoxy and pyridyl groups was obtained from glycidyl methacrylate (M₁) and 2-vinylpyridine (M₂) or 2-vinyl-5-ethylpyridine (M₂) by the action of azobisisobutyronitrile. The monomer reactivity ratios were determined in tetrahydrofuran at 60°C: r₁ = 0.510, r₂ = 0.620 with 2-vinylpyridine and r₁ = 0.57, r₂ = 0.62 with 2-vinyl-5-ethylpyridine. These were consistent with the calculated values with the reported Q and e values for these monomers. The intrinsic viscosities of the copolymers with 2-vinylpyridine and with 2-vinyl-5-ethylpyridine were found to be 0.17–0.19 and 0.26–0.38, respectively, in tetrahydrofuran at 30°C; they were independent of the copolymer composition. The copolymers were amorphous, had no clear melting points, and became insoluble crosslinked polymers under heating without further addition of any curing agents.     

High enantioselectivity in rhodium-catalyzed allylic alkylation of 1-substituted 2-propenyl acetates

[reaction: see text] Rhodium-catalyzed asymmetric allylic alkylation of 1-substituted 2-propenyl acetates with dimethyl malonate proceeded with high enantioselectivity in the presence of cesium carbonate as a base and a rhodium catalyst generated from Rh(dpm)(C(2)H(4))(2) (dpm = dipivaloylmethanato) and a chiral phosphino-oxazoline whose basic skeleton is axially chiral binaphthyl to give branch alkylation products in greater than 90% ee.     

Development of selective inhibitors against plasma kallikrein.

Specific plasma kallikrein inhibitors were designed and synthesized and their structure-activity relationship was studied. trans-4-Aminomethylcyclohexanecarbonyl (Tra)-lysyl-4-ethoxycarbonylanilide inhibited plasma kallikrein and plasmin with IC50 values of 23 and 210 microM, respectively, indicating that this compound is fairly specific to plasma kallikrein. Tra-arginyl-4-ethoxycarbonylanilide inhibited plasma kallikrein and plasmin with IC50 values of 16 and 480 microM, respectively. Tra-homoarginyl-4-carboxyanilide inhibited plasma kallikrein and plasmin with IC50 values of 14 microM and 1 mM, respectively. Finally, Tra-Arg(Mts)-4-acetylanilide (ACA) exhibited potent and selective inhibitory activity against plasma kallikrein (IC50 value for plasma kallikrein: 2 microM and for plasmin: 42 microM).     

Synthesis of directly linked zinc(II) porphyrin-imide dyads and energy gap dependence of intramolecular electron transfer reactions

A series of zinc(II) porphyrin-imide dyads (ZP-Im), in which an electron donating ZP moiety is directly connected to an electron accepting imide moiety in the meso position, have been prepared for the examination of energy gap dependence of intramolecular electron transfer reactions with large electronic coupling. The nearly perpendicular conformation of the imide moiety towards the porphyrin plane has been revealed by Xray crystal structures. The energy gap for charge separation, 1ZP* - Im --> ZP+ - Im-, is varied by changing the electron accepting imide moiety to cover a range of about 0.8 eV in DMF. Definitive evidence for electron transfer has been obtained in three solvents (toluene, THF, and DMF) through picosecond-femtosecond transient absorption studies, which have allowed us to determine the rates of photoinduced charge separation, 1ZP* - Im --> ZP+ - Im-, and subsequent thermal charge recombination ZP+ - Im- --> ZP - Im. The free-energy gap dependence (energy gap law) has been probed from the normal to the nearly top region for the charge separation rate alone, and only the inverted region for the charge recombination rate. Although both of the energy gap dependencies can be approximately reproduced by means of the simplified semiclassical equation, when we take into consideration the effect of the high frequency vibrations replaced by one mode of averaged frequency, many features, including the effects of solvent polarity and the electron tunneling matrix element on the energy gap law, differ considerably from those of the previously studied porphyrin-quinone systems, which have weaker interchromophore electronic interactions.