Synthesis of polydithiourethanes and their thermal,optical, and mechanical properties originated from monomers structure

Polyaddition of various diisothiocyanates and dithiols was achieved with triethylamine in dimethylformamide at 25 °C for 12 h under nitrogen, and then the corresponding polydithiourethanes (PDTUs) were obtained with high yield and molecular weight without depending on the monomer structures, although the dithiol monomer of the low nucleophilicity was unsuitable for polyaddition in this system. The chemical and physical properties of the obtained PDTUs such as solvent solubility, glass transition temperature, thermal stability, transparency, refractive index, and tensile strength, were analyzed in detail by gel permeation chromatography, nuclear magnetic resonance, Fourier transform infrared–attenuated total reflection, ultraviolet–visible, differential scanning calorimetry, thermogravimetric analysis, and tensile testing measurements. These results proved that PDTUs and their cast films having the aliphatic diisothiocyanate and dithiol moieties exhibited excellent chemical and physical properties compared to that of the aromatic PDTUs. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2255–2262     

Control of thermoresponsivity of biocompatible poly(trimethylene carbonate) with direct introduction of oligo(ethylene glycol) under various circumstances

Poly(trimethylene carbonate) (PTMC) is a well‐known biodegradable polymer with good biocompatible properties which make it suitable for biomedical applications. Poly(5‐[2‐{2‐(2‐methoxyethoxy)ethyoxy}‐ethoxymethyl]‐5‐methyl‐1,3‐dioxa‐2‐one) (PTMC‐MOE3OM) and copolymers, bearing oligo ethylene glycol (OEG) at the side chain of PTMC backbone, were selected to investigate the cloud point behavior by solvents such as PBS, water, 10% ethanol solution and various ionic strengths. A pH‐responsive copolymer, poly(TMCM‐MOE3OM‐co‐(5‐methyl‐5‐carboxylic‐1,3‐dioxane‐2‐one)) as carboxylic acid carbonate showed a decreased critical temperature at pH 2. Photo‐responsive copolymer, poly(TMCM‐MOE3OM‐co‐coumarin derivatives) bearing 1% and 10% of photo‐induced molecules (7‐[(5‐(5‐methyl‐1,3‐dioxa‐2‐one)methoxy)]‐methoxy coumarin (TMCM‐coumarin)) exhibited a low cloud point because of the hydrophobic moieties. Meanwhile, alternative coumarin polymer including 2% of 4‐methyl‐7‐[(5‐(5‐methyl‐1,3‐dioxa‐2‐one)methoxy)butoxy)]‐methoxy coumarin (TMCM‐4‐methyl‐coumarin) has been successfully synthesized and copolymerized as a novel molecule. The various combinations of monomers were studied and the significant properties were determined via external triggers after copolymerization. This study showed basically synthetic progress toward designs and trivial rationalization of thermoresponsive copolymers close to body temperature. At present, various pendant groups as side part affect to the lower critical solution temperature (LCST) and biodegradable polymer in order to utilize the actual external stimuli application. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3466–3474     

Highly Selective Asymmetric Intramolecular Selenocyclisation

Asymmetric intramolecular selenocyclisation of alkenoic acids, alkenols and alkenyl urethanes using chiral ferrocenylselenenyl cations proceeds smoothly to give the corresponding lactones, cyclic ethers and N-heterocyclic compounds, respectively, in moderate yields with very high diastereoselectivities.     

Chiral Bis(oxazoline)-copper Catalyzed Enantioselective Imidation of Sulfides

Prochiral sulfides reacted with Phl=NTs in the presence of a catalytic amount of Cu(I) salt together with a chiral 4,4′-disubstituted bis(oxazoline) ligand to afford the corresponding chiral sulfimides.     

Pd‐initiated polymerization of diazo compounds bearing dialkoxyphosphinyl group and hydrolysis of the resulting polymers and oligomers to afford phosphonic acid‐containing products

Pd‐initiated polymerization and oligomerization of diazo compounds containing a dialkoxyphosphinyl group are described. Polymerization of 2‐dialkoxyphosphinylethyl diazoacetates with π‐allylPdCl‐based initiating systems afforded C? C main chain polymers bearing phosphonate on each main chain carbon atom. The quantitative transformation of the side chain phosphonate to phosphonic acid resulted in the formation of water soluble polymers having the acid groups accumulated around their main chains, although the carbonyl ester linkage in the side chain was cleaved via intramolecular acid‐assisted hydrolysis in water at 80 °C. Pd‐initiated oligomerization of diethyl diazomethylphosphonate yielded an oligomeric product bearing diethoxyphosphiny groups directly attached to its main chain carbons, with unexpected incorporation of azo group in the main chain framework. Hydrolysis of the phosphonate of the oligomer afforded a water‐soluble product, which was revealed to show higher proton conductivity than poly(vinylphosphonic acid) under certain conditions. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1742–1751     

Combustion behaviors of isolated n-decane and ethanol droplets in carbon dioxide-rich ambience under microgravity

The burning and sooting behaviors of isolated fuel droplets for ethanol and n-decane are examined in high concentration of the ambient carbon dioxide under microgravity. A quartz fiber with the diameter of 50 μm maintains the droplet in the center of the combustion chamber and the range in the initial droplet diameter is from 0.30 to 0.80 mm. The ambience consists of oxygen, nitrogen and carbon dioxide. The concentration of oxygen is 21% in volume, and that of carbon dioxide is varied from 0% to 60% in volume. Detail measurements of the projected image of the droplet are conducted by using a high speed video camera and the effective droplet diameter squared are calculated from the surface area of the rotating body of the projected object. From evolutions of the droplet diameter squared, the instantaneous burning rates are calculated. Time history of the instantaneous burning rate clearly represents the droplet combustion events, such as the initial thermal expansion, ignition and following combustion. The instantaneous burning rate for n-decane shows an increasing trend during combustion, while that for non-sooting ethanol remains almost constant or shows a decreasing trend. A slight stepwise increase in the instantaneous burning rate is observed for larger n-decane droplets in air, which may be attributed to soot accumulation. However, this behavior of the burning rate disappears in higher concentration of carbon dioxide. Direct observation of the droplet flame indicates suppression of soot production in higher concentration of carbon dioxide and the suppression is enhanced for smaller droplet.     

Vinyl Polymerization by Metal Complexes. XXXIII. Polymerization of Acrylonitrile Initiated by Triazole-Copper(II) Complex in Dimethylsulfoxide Solution

Polymerization of acrylonitrile initiated by triazole-copper(II) complexes was studied in dimethylsulfoxide solution. It was found that the polymerization proceeds by a free radical mechanism; however, the complexes can hardly homopolymerize methyl methacrylate and styrene. Ability of the complexes to initiate polymerization seems to depend on the substituents of triazole, the sort of solvents, and the counterions of copper(n) salts. From the data of visible spectroscopy and the spin trapping, the initiation mechanism was discussed in terms of reduction of copper(II) followed by forming active species.