Novel fluoride transfer in the reaction of tricyclic epoxides with boron trifluoride

Reaction of the tricyclic epoxides ($\text{1a}$) and ($\text{1b}$) with boron trifluoride etherate leads to fluorohydrins ($\text{2a}$) and ($\text{2b}$) derived in the novel fluoride transfer, whereas ($\text{1c}$) undergoes isomerization to spiro ketone ($\text{3}$).     

Role of the special pair in the charge-separating event in photosynthesis

We synthesized special-pair/electron-acceptor systems consisting of a complementary slipped cofacial dimer of imidazolyl-substituted zinc porphyrin, bearing pyromellitdiimide as the electron acceptor. In the case of the dimer, the first and second oxidation potentials were split into a total of four peaks in the differential pulse voltammetry measurement. Furthermore, the shift values of the first oxidation potentials obtained by changing the solvent polarity for the dimer were almost half of those observed for the monomer. These results indicate that the radical cation is delocalized over the whole pi system of the dimer. Time-resolved transient absorption measurements revealed that, relative to the corresponding monomer, the dimer accelerated the charge separation rate, but decelerated the charge recombination rate. The smaller reorganization energy of the slipped cofacial dimer relative to that of the monomeric system demonstrates the significance of the special-pair arrangement for efficient charge separation in photosynthesis.     

Carbon dioxide fixation by microalgae photosynthesis using actual flue gas discharged from a boiler

To mitigate CO₂ discharged from thermal power plants, studies on CO₂ fixation by the photosynthesis of microalgae using actual exhaust gas have been carried out. The results are as follows.

Donor–acceptor–acceptor-type near-infrared fluorophores that contain dithienophosphole oxide and boryl groups: effect of the boryl group on the nonradiative decay

The use of donor–π–acceptor (D–π–A) skeletons is an effective strategy for the design of fluorophores with red-shifted emission. In particular, the use of amino and boryl moieties as the electron-donating and -accepting groups, respectively, can produce dyes that exhibit high fluorescence and solvatochromism. Herein, we introduce a dithienophosphole P-oxide scaffold as an acceptor–spacer to produce a boryl- and amino-substituted donor–acceptor–acceptor (D–A–A) π-system. The thus obtained fluorophores exhibit emission in the near-infrared (NIR) region, while maintaining high fluorescence quantum yields even in polar solvents (e.g. λ_em = 704 nm and Φ_F = 0.69 in CH₃CN). A comparison of these compounds with their formyl- or cyano-substituted counterparts demonstrated the importance of the boryl group for generating intense emission. The differences among these electron-accepting substituents were examined in detail using theoretical calculations, which revealed the crucial role of the boryl group in lowering the nonradiative decay rate constant by decreasing the non-adiabatic coupling in the internal conversion process. The D–A–A framework was further fine-tuned to improve the photostability. One of these D–A–A dyes was successfully used in bioimaging to visualize the blood vessels of Japanese medaka larvae and mouse brain.

Combination of electron-accepting diarylboryl terminal groups and dithienophosphole oxide spacers with electron-donating triarylamine moieties produces donor–acceptor–acceptor type π-systems, which exhibit emissions in the near-infrared region.     

Polymerization of cyclic derivatives of uracil and thymine

Cyclic derivatives of uracil and thymine were synthesized from their corresponding 1-(2′-chloroethyl) derivatives by dehydrochlorination. These compounds were found to undergo a variety of reactions, giving many valuable derivatives of uracil and thymine. The cyclic derivatives, as monomers, were polymerized with a cationic initiator by a unique ring-opening process. The polymerization proceeded by ring opening with isomerization of the pyrimidine ring to give a polymer in which pyrimidine rings were connected with ethylene between N-1 and N-3 or O-4 in the pyrimidine ring. The structure of these polymers was determined by nuclear magnetic resonance (NMR), ultraviolet (UV), infrared (IR), and mass spectra. The structure was affected by polymerization temperature.     

Improvement of in-gel digestion protocol for peptide mass fingerprinting by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

High-sensitivity, high-throughput analysis of proteins for proteomics studies is usually performed by polyacrylamide gel electrophoresis in combination with mass spectrometry. However, the quality of the data obtained depends on the in-gel digestion procedure employed. This work describes an improvement in the in-gel digestion efficiency for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) analysis. A dramatic improvement in the coverage of tryptic peptides was observed when n-octyl glucoside was added to the buffer. Whole cell extracted proteins from S. cerevisiae were separated by two-dimensional gel electrophoresis and stained with silver. Protein spots were identified using our improved in-gel digestion method and MALDI-TOFMS. In addition, the mass spectra obtained by using the matrix alpha-cyano-4-hydroxycinnamic acid (CHCA) were compared with those obtained using 2,5-dihydroxybenzoic acid (DHB). The DHB matrix usually gave more peaks, which led to higher sequence coverage and, consequently, to higher confidence in protein identification. This improved in-gel digestion protocol is simple and useful for protein identification by MALDI-TOFMS.     

Photochemical study of [3(3)](1,3,5)cyclophane and emission spectral properties of [3n]cyclophanes (n = 2-6)

Thephotochemical reaction of [3(3)](1,3,5)cyclophane 2, which is a photoprecursor for the formation of propella[3(3)]prismane 18, was studied using a sterilizing lamp (254 nm). Upon photolysis in dry and wet CH2Cl2 or MeOH in the presence of 2 mol/L aqueous HCl solution, the cyclophane 2 afforded novel cage compounds comprised of new skeletons, tetracyclo[6.3.1.0.(2,7)0(4,11)]dodeca-5,9-diene 43, hexacyclo[6.4.0.0.(2,6)0.(4,11)0.(5,10)0(9,12)]dodecane 44, and pentacyclo[6.4.0.0.(2,6)0.(4,11)0(5,10)]dodecane 45. All of these products were confirmed by the X-ray structural analyses. A possible mechanism for the formation of these photoproducts via the hexaprismane derivative 18 is proposed. The photophysical properties in the excited state of the [3n]cyclophanes ([3n]CP, n = 2-6) were investigated by measuring the emission spectra and determining the quantum yields and lifetimes of the fluorescence. All [3n]CPs show excimeric fluorescence without a monomeric one. The lifetime of the excimer fluorescence becomes gradually longer with the increasing number of the trimethylene bridges. The [3n]CPs also shows excimeric phosphorescence spectra without vibrational structures for n = 2, 4, and 5, while phosphorescence is absent for n = 3 and 6. With an increase in symmetry of the benzene skeleton in the [3(3)]- and [3(6)]CPs, the probability of the radiation (phosphorescence) process from the lowest triplet state may drastically decrease.     

Diastereoselective Iodocarbocyclization Reaction of 2- or 3-Oxy-4-pentenylmalonate Derivatives

1,2- Or 1,3-asymmetric induction in the iodocarbocyclization reaction of 4-pentenylmalonate derivatives having a stereogenic center at an allylic or a homoallylic position has been investigated. The iodocarbocyclization reactions of 3-oxy-4-pentenylmalonate derivatives proceeded with high cis-selectivity through stereoelectronic control of the oxygenated substituent at an allylic position. In the reaction of (S)-2-siloxy-4-pentenylmalonate, an excellent diastereoselectivity was achieved through the utilization of double stereodifferentiation with a chiral titanium catalyst. Furthermore, as an application of the present reaction, the asymmetric syntheses of cyclosarkomycin and a synthetic intermediate of brefeldin A from optically pure 2- and 3-oxy-4-pentenylmalonate derivatives are also described.     

Synthesis and applications of [1-(15)N]-labeled 4,6-dimethyl-4H-[1,2,5]oxadiazolo[3,4-d]pyrimidine-5,7-dione 1-oxide as a useful tool for mechanistic investigations

[1-(15)N]-Labeled 4,6-dimethyl-4H-[1,2,5]oxadiazolo[3,4-d]pyrimidine-5,7-dione 1-oxide (1-(15)N1) was easily prepared by nitration of commercially available 6-amino-1,3-dimethyl-1H-pyrimidine-2,4-dione using 15N-enriched nitric acid followed by an intramolecular oxidative cyclization with iodosylbenzene diacetate under mild conditions. On the basis of the experimental results using 1-(15)N1, the formation of 8-phenyltheophylline (3), the 1,3-dimethylalloxazines (4: n = 0, 1), and 1,3,7,9-tetramethyl-1H,9H-pyrimido[5,4-g]pteridine-2,4,6,8-tetraone++ + (5) in the thermal reaction of the N-oxide 1 with benzylamine, aniline, or piperidine, and the generation of NO or NO-related species in the reaction with N-acetylcysteamine were reasonably explained by considering the initial attack of the employed nucleophiles on the 3a-position of 1.