Raman spectroscopy of SWNTs produced by a XeCl excimer laser ablation at high temperatures

Synthesis of single-wall carbon nanotubes (SWNTs) was carried out by an ablation method using a XeCl excimer laser. It was irradiated onto a graphite target containing Co and Ni at the temperatures of 1073, 1173, 1273, 1373, 1473, 1523 and 1623 K under the atmosphere (0.1 MPa) of Ar gas with the flow rate of 12 ml/min. The measurement by a scanning/transmission electron microscope and Raman spectroscopy found the formation of SWNTs with the diameter of about 1.3 nm and the length of about 2 μm in ablated carbonaceous soot. The ratio of peak intensity of 1590 cm⁻¹ (G band) to that of 1335 cm⁻¹ (D band) in the high frequency Raman spectra increased with increasing the ambient temperature. The radial breathing mode (RBM) in the low frequency Raman spectra shows that the mean diameter of SWNTs increased with increasing the ambient temperature.     

Three-dimensional scanning force/tunneling spectroscopy at room temperature

We simultaneously measured the force and tunneling current in three-dimensional (3D) space on the Si(111)-(7 × 7) surface using scanning force/tunneling microscopy at room temperature. The observables, the frequency shift and the time-averaged tunneling current were converted to the physical quantities of interest, i.e. the interaction force and the instantaneous tunneling current. Using the same tip, the local density of states (LDOS) was mapped on the same surface area at constant height by measuring the time-averaged tunneling current as a function of the bias voltage at every lateral position. LDOS images at negative sample voltages indicate that the tip apex is covered with Si atoms, which is consistent with the Si-Si covalent bonding mechanism for AFM imaging. A measurement technique for 3D force/current mapping and LDOS imaging on the equivalent surface area using the same tip was thus demonstrated.     

Molybdenum-catalyzed reduction of molecular dinitrogen under mild reaction conditions

Quite recently we have found two nitrogen fixation systems catalyzed by molybdenum-dinitrogen complexes under mild reaction conditions; one is the transformation of molecular dinitrogen into its synthetic equivalent of ammonia and the other is that into ammonia. A molybdenum-dinitrogen complex bearing two ferrocenyl diphosphines works as a good catalyst in the transformation of molecular dinitrogen into silylamine, where up to 226 equiv are produced based on the catalyst. A dinitrogen-bridged dimolybdenum complex bearing a PNP-type pincer ligand works as a good catalyst in the direct transformation of molecular dinitrogen into ammonia, where up to 23 equiv are produced based on the catalyst. We believe that both systems provide a new aspect in the development of novel nitrogen fixation.     

Intramolecular oxycyanation of alkenes by cooperative Pd/BPh3 catalysis

The cooperative catalysis by palladium and triphenylborane effects the intramolecular oxycyanation of alkenes through the cleavage of O-CN bonds and the subsequent insertion of double bonds. The use of 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene (Xantphos) as a ligand for palladium is essential for allowing the transformation to proceed with high chemo- and regioselectivity. Variously substituted dihydrobenzofurans with both a tetra-substituted carbon and cyano functionality are accessed by the newly developed methodology.     

Photoinduced electron transfer and excitation energy transfer in directly linked zinc porphyrin/zinc phthalocyanine composite

Photoinduced electron transfer (ET) and excitation energy transfer (ENT) reactions in monomer and slipped-cofacial dimer systems of a directly linked Zn porphyrin (Por)-Zn phthalocyanine (Pc) heterodyad, ZnPc-ZnPor, were investigated by means of the picosecond and femtosecond transient absorption spectroscopies. In the dimer dyad system of two heterodyads connected through the coordination bond between two imidazolyl-substituted ZnPor bearing ZnPc, ZnPc-ZnPor(D), the rapid ENT from the ZnPor to ZnPc in the subpicosecond time region was followed by photoinduced charge separation (CS) and charge recombination (CR) with time constants of 47 and 510 ps, respectively. On the other hand in the monomer dyad system, no clear charge-separated state was observed although the CS with a time constant of 200 ps and CR with < or =70 ps were estimated. These results indicated that the dimer slipped-cofacial arrangement of pair porphyrins is advantageous for the effective production of the CS state. This advantage was discussed from the viewpoint of a decrease in the reorganization energy of the dimer relative to that of the monomer system. In addition, the electrochemical measurements indicated that the strong interaction between ZnPc and ZnPor moieties also contributed to the fast CS process despite the marginal driving force for the CS process. The dimer dyad of ZnPc-ZnPor provides full advantages in efficiencies of the light harvesting and the CS state production.     

NAD(P)+-NAD(P)H models. 90. Stereoselection controlled by electronic effect of a carbonyl group in oxidation of NAD(P)H analog

4-Monodeuterated NAD(P)H model compounds (1,4,6,7-tetrahydro-1,6,11-trimethyl-5-oxo-5H-benzo[c]pyrido[2,3-e]az epin; 11Me-MMPAH) have been oxidized with a series of p-benzoquinone and its derivatives in the presence of Mg2+. The models have an axial chirality with respect to the orientation of carbonyl dipole, the dihedral angle of which is larger than 55 degrees out of the plane of dihydropyridine ring. Without Mg2+, the anti- (with respect to the carbonyl dipole) hydrogen is 3 to 32 times more reactive than the corresponding syn-hydrogen, whereas, when Mg2+ is present in the system, the selectivity is shifted toward the syn-preferency. Mg2+ plays the role of a Lewis acid catalyst to control the stereochemistry at the same time as it catalyzes the reaction.     

Comparative studies on the analysis of glycosylation heterogeneity of sialic acid-containing glycoproteins using capillary electrophoresis

Frontal affinity chromatography is a method for quantitative analysis of biomolecular interactions. We reinforced it by incorporating various merits of a contemporary liquid chromatography system. As a model study, the interaction between an immobilized Caenorhabditis elegans galectin (LEC-6) and fluorescently labeled oligosaccharides (pyridylaminated sugars) was analyzed. LEC-6 was coupled to N-hydroxysuccinimide-activated Sepharose 4 Fast Flow (100 μm diameter), and packed into a miniature column (e.g., 10×4.0 mm, 0.126 ml). Twelve pyridylaminated oligosaccharides were applied to the column through a 2-ml sample loop, and their elution patterns were monitored by fluorescence. The volume of the elution front (V) determined graphically for each sample was compared with that obtained in the presence of an excess amount of hapten saccharide, lactose (V₀); and the dissociation constant, K_d, was calculated according to the literature [K. Kasai, Y. Oda, M. Nishikawa, S. Ishii, J. Chromatogr. 376 (1986) 33]. This system also proved to be useful for an inverse confirmation; that is, application of galectins to an immobilized glycan column (in the present case, asialofetuin was immobilized on Sepharose 4 Fast Flow), and the elution profiles were monitored by fluorescence based on tryptophan. The relative affinity of various galectins for asialofetuin could be easily compared in terms of the extent of retardation. The newly constructed system proved to be extremely versatile. It enabled rapid (analysis time 12 min/cycle) and sensitive (20 nM for pyridylaminated derivatives, and 1 μg/ml for protein) analyses of lectin–carbohydrate interactions. It should become a powerful tool for elucidation of biomolecular interactions, in particular for functional analysis of a large number of proteins that should be the essential issues of post-genome projects.     

Liquid crystalline polyfluorenes for blue polarized electroluminescence

A series of 9,9‐dialkyl‐poly(fluorene‐2,7‐diyl)s containing linear and branched alkyl substituents with a M_n of up to 200000 g/mol has been synthesized. Moreover, some of the polymers were end capped with a suitable hole transport functionality, such as a triphenylamine derivative, to improve their charge transport properties and to control the molecular weight. The thermal alignment of these novel polymers on a rubbed polyimide layer led to highly anisotropic film formation with dichroic ratios (absorption parallel and perpendicular to the rubbing direction) of up to 26 in absorption and 21 in emission.     

Ruthenium-catalyzed propargylic substitution reaction of propargylic alcohols with thiols: a general synthetic route to propargylic sulfides

A novel cationic methanethiolate-bridged diruthenium complex [Cp*RuCl(mu2-SMe)2RuCp*(OH2)]OTf (1e) has been disclosed to promote the catalytic propargylic substitution reaction of propargylic alcohols bearing not only terminal alkyne group but also internal alkyne group with thiols. It is noteworthy that neutral thiolate-bridged diruthenium complexes (1a-1c), which were known to promote the propargylic substitution reactions of propargylic alcohols bearing a terminal alkyne group with various heteroatom- and carbon-centered nucleophiles, did not work at all. The catalytic reaction described here provides a general and environmentally friendly preparative method for propargylic sulfides, which are quite useful intermediates in organic synthesis, directly from the corresponding propargylic alcohols and thiols.