A free energy calculation study of the effect of H-->F substitution on binding affinity in ligand-antibody interactions

Changes in binding affinity to catalytic antibody 6D9 of chloramphenicol phosphonate derivatives (CPDs) containing H or F were investigated by performing free energy calculations based on molecular dynamics simulations. We calculated the binding free energy, enthalpy, and entropy changes (DeltaDeltaG, DeltaDeltaH, and -TDeltaDeltaS) attributable to H-->F substitution by comparing results for CPDs containing a trifluoroacetylamino group (CPD-F) or an acetylamino group (CPD-H). The calculated DeltaDeltaG, DeltaDeltaH, and -TDeltaDeltaS values were -2.9, -6.3, and 3.5 kcal mol(-1) and close to experimental values observed for a series of similar ligands, chloramphenicol phosphonates with F and H (-1.4, -3.5, and 2.1 kcal mol(-1)). Therefore, CPD-F binds more strongly to 6D9 than does CPD-H. To clarify the origin of the large difference in DeltaDeltaG, we apportioned the calculated values of DeltaDeltaG and DeltaG for the associated and dissociated states into contributions from various atomic interactions. We found that the H-->F substitution increased the binding affinity mainly by decreasing the hydration free energy and not by increasing favorable interactions with the antibody. The decreased hydration free energy of the ligand was mainly due to unfavorable coulombic interactions between the trifluoroacetylamino group and solvent waters, which increased the free energy of the dissociated state (by about 3.7 kcal mol(-1)). Also, the trifluoroacetylamino group slightly increased the free energy level of the associated state (about 0.8 kcal mol(-1)) because favorable van der Waals interactions compensated for unfavorable coulombic interactions with antibody atoms. In addition, the enthalpy and entropy changes, DeltaDeltaH and -TDeltaDeltaS (computationally -6.3 and 3.5 kcal mol(-1)), originated mainly from a decrease in hydration free energy in the dissociated state. The CPD-F and CPD-H ligands had substantially different structures in the dissociated and complexed states.     

Ruthenium-catalyzed propargylic substitution reactions of propargylic alcohols with oxygen-, nitrogen-, and phosphorus-centered nucleophiles

The scope and limitations of the ruthenium-catalyzed propargylic substitution reaction of propargylic alcohols with heteroatom-centered nucleophiles are presented. Oxygen-, nitrogen-, and phosphorus-centered nucleophiles such as alcohols, amines, amides, and phosphine oxide are available for this catalytic reaction. Only the thiolate-bridged diruthenium complexes can work as catalysts for this reaction. Results of some stoichiometric and catalytic reactions indicate that the catalytic propargylic substitution reaction proceeds via an allenylidene complex formed in situ, whereby the attack of nucleophiles to the allenylidene C(gamma) atom is a key step. Investigation of the relative rate constants for the reaction of propargylic alcohols with several para-substituted anilines reveals that the attack of anilines on the allenylidene C(gamma) atom is not involved in the rate-determining step and rather the acidity of conjugated anilines of an alkynyl complex, which is formed after the attack of aniline on the C(gamma) atom, is considered to be the most important factor to determine the rate of this catalytic reaction. The key point to promote this catalytic reaction by using the thiolate-bridged diruthenium complexes is considered to be the ease of the ligand exchange step between a vinylidene ligand on the diruthenium complexes and another propargylic alcohol in the catalytic cycle. The reason why only the thiolate-bridged diruthenium complexes promote the ligand exchange step more easily with respect to other monoruthenium complexes in this catalytic reaction should be that one Ru moiety, which is not involved in the allenylidene formation, works as an electron pool or a mobile ligand to another Ru site. The catalytic procedure presented here provides a versatile, direct, and one-step method for propargylic substitution of propargylic alcohols in contrast to the so far well-known stoichiometric and stepwise Nicholas reaction.     

Photocyclization of n-[ω-(cycloalken-1-yl)alkyl]-and n-[ω-(inden-3-yl)alkyl]phthalimides : Synthesis of spiro-nitrogen multicyclic systems

Photolysis of the N-[ω-(cycloalken-1-yl)alkyl]phthalimides 6b-$\text{e}$ in each case gave a pair of stereoisomers of spiro-nitrogen multicyclic systems (9b-$\text{e}$) in moderate yields, whose stereochemistry was determined by means of chemical and spectroscopic analyses. Similarly, in N-[ω-(inden-3-yl)alkyl]-phthalimides (8), spiro-nitrogen macrocycles up to 13-membered 13a-$\text{c}$ were obtained in good yields     

Structure of cypridina biluciferyl,a dimer of cypridina luciferyl radical having bioluminescent activity

Structure of $\text{Cypridina}$ biluciferyl (luciferyl radical dimer), which is produced by chemical oxidation of $\text{C}$. luciferin with such as ferricyanide, was determined to be the symmetric 5,5′-dimer of $\text{C}$. luciferin. It gives light in the presence of $\text{C}$. luciferase, although the bioluminescent rate is very low. We suggest that the biluciferyl is an intermediate in the oxidation of the luciferin to $\text{C}$. luciferinol.     

Formation of Supramolecular Nanostructures through in Situ Self-Assembly and Post-Assembly Modification of a Biocatalytically Constructed Dipeptide Hydrazide**

Aqueous self-assembly of short peptides has attracted growing attention for the construction of supramolecular materials for various bioapplications. Herein, we describe how the thermolysin-assisted biocatalytic construction of a dipeptide hydrazide from an N-protected amino acid and an amino acid hydrazide leads to the formation of thermally stable supramolecular hydrogels. In addition, we demonstrate the post-assembly modification of the supramolecular architectures constructed in situ tethering hydrazide groups as a chemical handle by means of fluorescence imaging.     

Computer-Aided Detection of Quantitative Signatures for Breast Fibroepithelial Tumors Using Label-Free Multi-Photon Imaging

Fibroadenomas (FAs) and phyllodes tumors (PTs) are major benign breast tumors, pathologically classified as fibroepithelial tumors. Although the clinical management of PTs differs from FAs, distinction by core needle biopsy diagnoses is still challenging. Here, a combined technique of label-free imaging with multi-photon microscopy and artificial intelligence was applied to detect quantitative signatures that differentiate fibroepithelial lesions. Multi-photon excited autofluorescence and second harmonic generation (SHG) signals were detected in tissue sections. A pixel-wise semantic segmentation method using a deep learning framework was used to separate epithelial and stromal regions automatically. The epithelial to stromal area ratio and the collagen SHG signal strength were investigated for their ability to distinguish fibroepithelial lesions. An image segmentation analysis with a pixel-wise semantic segmentation framework using a deep convolutional neural network showed the accurate separation of epithelial and stromal regions. A further investigation, to determine if scoring the epithelial to stromal area ratio and the SHG signal strength within the stromal area could be a marker for differentiating fibroepithelial tumors, showed accurate classification. Therefore, molecular and morphological changes, detected through the assistance of computational and label-free multi-photon imaging techniques, enable us to propose quantitative signatures for epithelial and stromal alterations in breast tissues.     

Pd‐initiated polymerization of diazo compounds bearing dialkoxyphosphinyl group and hydrolysis of the resulting polymers and oligomers to afford phosphonic acid‐containing products

Pd‐initiated polymerization and oligomerization of diazo compounds containing a dialkoxyphosphinyl group are described. Polymerization of 2‐dialkoxyphosphinylethyl diazoacetates with π‐allylPdCl‐based initiating systems afforded C? C main chain polymers bearing phosphonate on each main chain carbon atom. The quantitative transformation of the side chain phosphonate to phosphonic acid resulted in the formation of water soluble polymers having the acid groups accumulated around their main chains, although the carbonyl ester linkage in the side chain was cleaved via intramolecular acid‐assisted hydrolysis in water at 80 °C. Pd‐initiated oligomerization of diethyl diazomethylphosphonate yielded an oligomeric product bearing diethoxyphosphiny groups directly attached to its main chain carbons, with unexpected incorporation of azo group in the main chain framework. Hydrolysis of the phosphonate of the oligomer afforded a water‐soluble product, which was revealed to show higher proton conductivity than poly(vinylphosphonic acid) under certain conditions. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1742–1751     

Synthesis and characterization of titanium and zirconium complexes with silicone-bridged phenoxycyclopentadienyl ligands

Dimethylsilyl(2,3,4,5-tetramethylcyclopentadienyl)(3-tert-butyl-5-methyl-2-phenoxy)titanium dichloride (1a), a useful catalyst precursor for olefin copolymerization, was synthesized at high yield starting from allyl-protected phenolic ligand 3a,which was first treated with 2 equiv. of n-BuLi to selectively give the dilithium salt of 3a along with 1-heptene, a coupling product of a protected allyl ether moiety and butyl anion. Addition of TiCl₄ to the resulting dilithium salt of 3a in toluene afforded 1a in 50% isolated yield. This methodology could be applied to the preparation of related titanium and zirconoium complexes 1b-1d, 8 with silicone-bridged Cp-phenoxy ligands, whereas the reaction starting from methyl-protected precursor 2a did not produce the zirconium complex 8. Copolymerization of ethylene and 1-hexene with the newly prepared complexes was also investigated.     

Absolute configuration and conformation analysis of 1-phenylethanol by matrix-isolation infrared and vibrational circular dichroism spectroscopy combined with density functional theory calculation

The absolute configuration and conformation of 1-phenylethanol (1-PhEtOH) have been determined by matrix-isolation infrared (IR) and vibrational circular dichroism (VCD) spectroscopy combined with quantum chemical calculations. Quantum chemical calculations have identified that there are three conformers, namely, I, II, and III, in which characteristic intramolecular interactions are found. The IR spectrum-conformation correlation for 1-PhEtOH has been developed by the Ar matrix-isolation IR measurement and used for the assignments of the observed IR bands. In a dilute CCl(4) solution, 1-PhEtOH exists predominantly as conformer I along with a trace amount of conformer II. By considering conformations and intermolecular hydrogen-bonding in the spectral simulation for (S)-1-PhEtOH, we have successfully reproduced the VCD spectrum of (-)-1-PhEtOH observed in a dilute CS(2) solution. Thus, (-)-1-PhEtOH is of S-configuration and conformer I in the dilute solution. The same method has been applied to analyze the VCD spectra measured in the liquid state of (-)-1-PhEtOH. The absolute configuration of 1-PhEtOH in the condensed phase is enabled by identifying VCD bands that are insensitive to conformational changes and intermolecular interactions. The present work provides a combinatorial procedure for determination of both the absolute configuration and the conformation of chiral molecules in a dilute solution and condensed phase.