Dynamic structural change of a twisted hexaporphyrin complex by highly specific molecular recognition

The highly specific molecular recognition of a twisted hexaporphyrin complex, tris[5,5'-bis[5,10,15-tris[methoxy(ethoxy)(2)carbonylethyl]porphyrinatozinc(II)]-2,2'-bipyridine]ruthenium(II) chloride (2), is described. Complex 2 has two trisporphyrin binding sites and can bind two triamines, tris(2-aminoethyl)amine (3) (K(1) = 3.0 x 10(8) M(-1), K(2) = 3.0 x 10(7) M(-1)), 1,1,1-tris(aminomethyl)ethane (4) (K(1) = 2.0 x 10(7) M(-1), K(2) = 1.4 x 10(6) M(-1)), tris(3-aminopropyl)amine (5) (K(1) = 3.5 x 10(6) M(-1), K(2) = 6.0 x 10(6) M(-1)), and 1,3,5-tris(aminomethyl)benzene (6) (K(1) = 2.9 x 10(6) M(-1), K(2) = 1.2 x 10(6) M(-1)), strongly with its torsional motion. The 1:2 complex between 2 and the best fit triamine 3 showed the nature of the specific rigid structure in the UV-vis, fluorescence, and (1)H NMR spectra and isothermal titration calorimetry (ITC) measurements.     

Double phosphinylation of propargylic alcohols: a novel synthetic route to 1,2-bis(diphenylphosphino)ethane derivatives

[reaction: see text] Double phosphinylation of propargylic alcohols with diphenylphosphine oxide in the presence of a thiolate-bridged diruthenium complex as catalyst gives the corresponding 2,3-bis(diphenylphosphinyl)-1-propenes in high yields with a complete selectivity.     

Stereospecific polymerization of isobutyl vinyl ether catalyzed by calcined iron sulfate

The polymerization of isobutyl vinyl ether was studied in a heterogeneous system using iron (II) sulfate calcined in air at various temperatures as a catalyst. The maximum activity was shown by the catalyst calcined at 700°C, which effected the polymerization at room temperature in a few seconds, while the sulfate treated at 750°C was totally inactive. Poly(vinyl ethyl ether) was also obtained by the FeSO₄ (700°C) catalyst at room temperature. This catalyst formed the crystalline polymer (melting temperature 135–138°C) when the reaction was performed in toluene as solvent at room temperature. Poisoning experiments with Hammett indicators were carried out with the FeSO₄ (700°C) catalyst. The treatment with n-butylamine rendered it inactive in the reaction of isobutyl vinyl ether, while its catalytic activity was little affected by dicinnamalacetone. On the basis of the observed results, the nature of active sites of catalyst is discussed.     

Stimulatory effect of red light on starch accumulation in a marine green alga,chlamydomonas sp. strain MGA161

A marine green alga,Chlamydomonas sp. strain MGA161 was cultivated under illumination of red and white lights. The growth rate under red light illumination was almost the same as that in the basic conditions under white light illumination, but red light-grown cells accumulated almost twice as much starch as white light-grown cells. Although there was a slight decrease in carbonic anhydrase activity, red light-illuminated cells had almost 2.3 times the fructose-l,6-diphos-phatase activity of white light-illuminated cells. Red light might stimulate starch accumulation by increasing the amounts of enzymes related to carbon fixation through the phytochrome system. Cells grown under red light degraded 1.6 times as much starch and produced 1.7 times as much hydrogen and 1.6 times as much ethanol compared with cells grown under white light during 12 h of dark anaerobic fermentation.     

Alkenyl- and aryl[2-(hydroxymethyl)phenyl]dimethylsilanes: an entry to tetraorganosilicon reagents for the silicon-based cross-coupling reaction

Alkenyl- and aryl[2-(hydroxymethyl)phenyl]dimethylsilanes, highly stable tetraorganosilicon reagents, are found to react with aryl and alkenyl iodides in the presence of a palladium catalyst and K2CO3 as a base, significantly milder conditions compared with those ever reported for the silicon-based cross-coupling reactions. The reaction tolerates a wide range of functional groups, including silyl protectors, and allows a gram-scale synthesis to recover and reuse the silicon residue.     

Thermal decomposition of vinylacetylene in shock waves

The thermal decomposition of vinylacetylene (C₄H₄) was studied behind reflected shock waves using both a single-pulse method (reaction time between 0.8 and 3.3 ms) and a time-resolved UV-absorption method (230 nm). The studies were done over the temperature range of 1170–1690 K at the total pressure range of 1.3–2.3 atm. The mechanism was used to interpret both the early and late stages of vinylacetylene decomposition at the high temperatures. It was confirmed that C₄H₄ dissociation proceeded through the following three channels. The rate constant expression of reaction (1) was determined as k₁ = 6.3 × 10¹³ exp(?87.1 kcal/RT) s^?1. The rate constants of the succeeding reactions (chain reaction, C₄H₄ + H → i-C₄H₃ + H₂ and C₄H₄ + H → C₂H₂ + C₂H₃ and decomposition reactions of free radicals, i-C₄H₃ + M → C₄H₂ + H + M) were confirmed or estimated. © John Wiley & Sons, Inc.     

Acid catalyzed ring contractions in endo-2,8-trimethylene-cis-bicyclo[3.3.0]octyl cations to methylperhydrotriquinacenes. One of the methyl ext

Sulfuric acid catalyzed ring contractions with extrusion of a methyl group were examined for alcohol and olefin derivatives (28–31) of endo-2,8-trimethylene-cis-bicyclo[3.3.0]octane (11), which was one of the two possible progenitors, among altogether 69 isomers, for methylperhydrotriquinacenes (6, 7 and 12), the only methyltricyclodecane intermediates found so far, in the tricycloundecane rearrangement. Only minor amounts (1.6–2.0%) of methylperhydrotriquinacenes were formed from these reactants 28–31, and the results support the earlier theoretical conclusion that the methyl extrusions were in general energetically quite unfavorable processes owing to the formation of primary carbinyl cations at the expense of more stable secondary bridge or tertiary bridgehead ones. Reaction pathways for these precursors 28–31 were discussed with reference to those of perhydrotriquinacene 2-carbinyl cations (33a's), which corresponded to some of the ring contraction product cations from 28–31.     

Nitrosation of Phenolic Substrates under Mildly Basic Conditions: Selective Preparation of p-Quinone Monooximes and Their Antiviral Activities

Nitrosation of 3-methoxyphenol and 1-naphthol were examined under both acidic (NaNO(2)-EtCO(2)H-H(2)O) and basic (i-AmNO(2)-K(2)CO(3)-DMF) conditions. Acidic nitrosations afforded ortho-directed products, whereas para-directed nitrosations were observed under basic conditions to yield p-quinone monooximes. The basic para-directed nitrosation was further examined using 15 phenols, two naphthols, and four phenolic heterocyclics. A one-pot operation of the basic nitrosation followed by methylation with dimethyl sulfate gave the corresponding methyl ethers in high yield. Two p-quinone monooximes derived from 3-methoxyphenol and 8-hydroxyquinoline showed a moderate activity against HSV-1, and the latter oxime was also effective against HSV-2. On the other hand, p-quinone monooximes derived from methyl salicylate, 1-naphthol, 7-hydroxy-2-methylbenzo[b]furan, and 8-hydroxycoumarin showed the comparable activity to that of DDI against HIV-1.     

Evaluation of dissociation constants of ammonium ion in aqueous lithium perchlorate and lithium chloride-sodium chloride mixed solutions

The Pitzer approach has been applied to the evaluation of dissociation constants of ammonium ion in lithium perchlorate and lithium chloride-sodium chloride mixed solutions at 25°C. The calculated values showed good agreement with the observed values, provided all the higher-order interaction terms ('s and 's) concerned were introduced. The unknown (NH₄LiClO₄) value was determined from the isopiestic measurements of NH₄ClO₄–LiClO₄ mixed solutions. Parameters in the Pitzer formalism for ammonia-ion interactions involved in LiCl and NaCl media were determined by use of the activity coefficients of ammonia measured in LiCl–NaCl mixed solutions by a transpiration method.