Irreversible helix rearrangement from Cis‐transoid to Cis‐cisoid in poly(p‐n‐hexyloxyphenylacetylene) induced by heat‐treatment in solid phase

Polymerization of p‐n‐hexyloxyphenylacetylene (pHPA) by using a [Rh(norbornadine)Cl]₂‐triethylamine catalyst was carried out at room temperature to afford stereoregular helical poly(p‐n‐hexyloxyphenylacetylene)s (PpHPAs). When ethanol and n‐hexane were used as polymerization solvents, a bright yellow PpHPAs, poly( Y ) with M_n = 8.5 × 10⁴ and its purple red polymer, poly( R ) with M_n = 5.3 × 10⁴ were obtained in 95% yields and 84% yields, respectively. Diffuse reflective UV–vis spectra of poly( Y ) and poly( R ) in solid phase showed different broad absorption peaks at 445 and 575 nm, respectively. X‐Ray diffraction patterns of poly( Y ) and poly( R ) showed typical columnar structures assignable to cis‐transoid and cis‐cisoid structures, respectively, which were also supported by molecule mechanics calculation. Poly( Y ) was irreversibly transformed to a reddish‐black polymer, poly( Y‐B ), which columnar diameter was nearly the same as that of poly( R ). Further, poly( Y ) showed an exothermic peak in the differential scanning calorimetry trace at 80 °C for 1 h in N₂ gas. Thus, these findings suggest a thermally irreversible rearrangement from an unstable cis‐transoid form, poly( Y ) with a stretched cis‐transoid helix to a stable cis‐cisoid form, poly( R ), with a contracted cis‐cisoid helix in the solid phase to give poly( Y → B ) with the cis‐cisoid form. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Heavy Quark Potential and Quarkonium Spectrum in Nonperturbative pNRQCD

The charmonium and bottomonium mass spectra are investigated systematically in potential nonrelativistic QCD with the heavy quark potential computed by lattice QCD simulations nonperturbatively. The potential consists of a static potential and relativistic corrections classified in powers of the inverse of heavy quark mass m, and the effects of the O(1/m) correction, the O(1/m ²) spin–orbit and spin–tensor corrections on the mass spectra are examined systematically. The pattern of the mass spectra is found to be in fairly good agreement with the experimental data, in which the O(1/m) correction gives an important contribution.     

Fundamental imaging properties of transillumination laser computed tomography based on coherent detection imaging method.

The coherent detection imaging (CDI) method uses the optical heterodyne detection technique. CW and single frequency lasers having long coherence lengths are used to exploit the maximum advantages of heterodyne detection, such as high directionality, selectivity and sensitivity. The CDI method based on optical heterodyne detection enables selective filtering of the directional coherence-retaining emergent photons, which leads to image reconstruction from projections, similar to X-ray computed tomography (CT). So far we have demonstrated the advantages and capabilities of the measurement technique for transillumination optical computed tomography in biomedicine. Here, we investigate the fundamental imaging properties of CDI method, such as its high directionality and quantitativeness, with preliminary physical phantom experiments. The results show that the CDI method satisfies the requirements for CT reconstruction under the first order approximation, and enables quantitative measurements in the sense that the relationship between estimated and actual concentration retains a satisfactory linearity.     

Effects of Pluronics surfactants on morphology and porosity of hematite particles produced from forced hydrolysis reaction

The shape and porosity of hematite particles, produced from a forced hydrolysis reaction of acidic FeCl₃ solution, were controlled by using Pluronics as nonionic surfactants (0–4 wt.%). Pluronics possess a nominal formula of (PEO) _x –(PPO) _y –(PEO) _x . The effect of Pluronics with low hydrophilicity (PEO contents were less than 50 mol%) was small and provided spherical particles the same as that of the system without Pluronics (control system). However, Pluronics with higher hydrophilicity (PEO contents were over 50 mol%) gave ellipsoidal hematite particles. This effect on the particle morphology was enhanced by an increase in their molecular weight. On the other hand, the Pluronics possessing an opposite nominal formula [(PPO) _x –(PEO) _y –(PPO) _x ] exhibited no effect on the particle shape; it only depressed phase transformation from ?-FeOOH to hematite. Not only the morphology but also the pore size of hematite particles was controlled from nonporous to mesoporous by using Pluronics. The N₂ adsorption experiment and t-plot curve analysis revealed that the hematite particles changed from mesoporous to microporous by an increase in the concentration of Pluronics. On the other hand, in the presence of very low amounts of Pluronics molecules (0.1 wt.%), nonporous hematite particles were produced via strong aggregation of PN particles by their hydrogen bonding between hydroxyl and PEO or PPO groups. The dynamic light scattering measurement for the system with Pluronics clarified the existence of polynuclear (PN) particles with a hydrodynamic particle diameter (D _a) of ca. 40 nm after these were aged for 6 h. The size of PN particles remained constant at ca. 40 nm during aging time of 12 h～3 days, but the scattering intensity was decreased. This decrease in the scattering intensity reveals that the number of PN particles is reduced by aggregation. The transmission electron microscope, inductively coupled plasma atomic emission spectroscopy, and total organic carbon analysis measurements employed on the systems produced for ellipsoidal particles elucidated that the formation of ellipsoidal hematite particles is attributed to the adsorption of Pluronics on the surfaces of PN and growing hematite particles.     

Preparation of a cycloheptane ring from a 1,2-diketone with high stereoselectivity

Treatment of 1,6-dialkylhexa-1,5-diene-3,4-diones with bis(iodozincio)methane gave zinc alkoxides of cis-5,6-dialkylcyclohepta-3,7-diene-1,3-diol in good yields at room temperature. The reaction proceeded with high stereospecificity. Bis(iodozincio)methane converted the diketone into the cis-divinylcyclopropane-1,2-diol stereoselectively; this diol transformed into the corresponding cycloheptane derivative stereospecifically via Cope rearrangement.     

Hydrofluoroarylation of alkynes with fluoroarenes

A combination of Ni(cod)(2) and PCyp(3) is found to be an effective catalyst for chemoselective activation of the C-H bond of fluoroarenes over C-F bonds followed by insertion of alkynes to allow direct alkenylation of the electron-deficient arenes. The characteristics of the reactions are: a C-H bond ortho to a fluorine substituent is selectively activated; the reactivity of fluorobenzenes is roughly proportional to the number of fluorine atoms. The reaction conditions tolerate a broad range of both alkynes and fluoroarenes containing both electron-withdrawing and -donating groups, thus allowing efficient synthesis of a variety of substituted ethenes containing a fluoroaryl motif in high regio- and stereoselective manners. Mechanistic studies including both labeling experiments and stoichiometric reactions reveal that oxidative addition of C-H bonds in fluoroarenes to nickel(0) is kinetically highly facile whereas that of C-F bonds is thermodynamically favoured.     

1,4-Addition of silicon dienoates to α,β-unsaturated aldehydes catalyzed by in situ-generated silicon Lewis acid

In situ-generated silyl methide species (R(3)Si-CTf(2)R') effectively catalyzed the reaction of β-substituted α,β-unsaturated aldehydes with silicon dienoates such as 3-bromo-2-TESO-furan to give the corresponding γ-adducts with excellent 1,4-selectivity and good anti selectivity.     

Optimization of simulated moving bed chromatography with fractionation and feedback: Part II. Fractionation of both outlets

A new improvement based on outlet fractionation and feedback has been developed for simulated moving bed (SMB) chromatography. In this contribution, this fractionation and feedback SMB (FF-SMB) concept is extended to the general scenario which integrates a simultaneous fractionation of both outlet streams. A model-based optimization approach, previously adopted to investigate single fractionation, is extended to consider this flexible fractionation policy. Quantitative optimization studies based on a specific separation problem reveal that the double fractionation is the most efficient operating scheme in terms of maximum feed throughput, while the two existing single fractionation modes discussed in our previous study are also significantly superior to the conventional SMB operation. The advantages of the double fractionation extension are further demonstrated in terms of several more detailed performance criteria. In order to evaluate the applicability of the fractionation and feedback modification, the effect of product purity, adsorption selectivity, column efficiency and column number on the relative potential of FF-SMB over SMB is examined.