Ru decorated Pt nanoparticles by a modified polyol process for enhanced catalytic activity for methanol oxidation

Ru decorated Pt nanoparticles on carbon nanotubes (MWCNTs) were prepared by a modified polyol synthesis method for enhanced catalytic activity for methanol oxidation. The characterizations for the electrocatalysts were carried out by transmission electron microscopy (TEM), X-ray diffraction (XRD), cyclic voltammetry (CV) and chronoamperometry (CA). The modified polyol synthesis method promoted position-controlled nucleation and growth of Ru atoms near Pt, and resulted in improved durability against catalyst poisoning compared to PtRu/MWCNTs prepared by common polyol method. This concept also allowed a high loading and dispersion of the catalyst on the carbon supports with few agglomerations of catalyst nanoparticles, resulting in high catalytic activity.     

An Extended Model for Establishing Dominance in Multiattribute Decisionmaking

This paper is concerned with the use of incomplete information about utilities and weights in multiattribute decisionmaking. Because of time pressure and/or lack of knowledge, a decision maker may only be able to provide incomplete information which might be expressed as a set of linear inequalities. If the decision maker's information on both weights and utilities is imprecisely identified, then the model for establishing pairwise dominance becomes a non-linear program. A method for obtaining non-dominated alternatives without solving the non-linear program is proposed using a simple weighted-additive function.     

Observation of insulating–insulating monoclinic structural transition in macro‐sized VO2 single crystals [Phys. Status Solidi RRL 5, No. 3, R107–R109 (2011)]

In our article, we reported the observation of monoclinic M2 to M1 structural phase transition in VO₂ single crystal near the temperature of ～49 °C. However, the re‐examination of Laue patterns reveals that previously defined monoclinic M1 and M2 phases can be interpreted as monoclinic M2 and triclinic T phases instead. Careful experimental geometry calibration and further refinement of the lattice parameter ratios and angles show that monoclinic M2 and triclinic T phases fit better with the experimental data. On the other hand, our previous misidentification of the insulating phases does NOT affect the conclusions of our article. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

MRI of thermally denatured blood: methemoglobin formation and relaxation effects

Focal regions of T₁-shortening have been observed in magnetic resonance imaging (MRI)-monitored thermal ablations of perfused tissues. The aims of this study were two-fold: to find evidence for heat-induced conversion of hemoglobin (Hb) to methemoglobin (mHb), and to investigate the effects of heat treatment of in-vitro blood components upon their MR relaxation times. Spectrophotometric studies were performed to confirm the heat-induced formation of methemoglobin. Preparations of whole and fractionated blood, previously submitted to elevated temperatures of 40°C to 80°C, were imaged and the relaxation times were calculated. Optical absorption spectra of samples containing free Hb, heated to 60°C, showed increased light absorption at 630 nm, evident of mHb presence. Short T₁ values in whole blood (1.13 s) and packed red blood cell (0.65 s) compartments, heated at 60°C, compared to their baseline values (1.62 s and 0.83 s, respectively), were attributed to mHb formation. In relation to MRI-guided thermal interventions, these results suggest a possible explanation for observation of hyperintense regions on T₁-weighted images.     

Swallowtail band structure of the superfluid Fermi gas in an optical lattice

We investigate the energy band structure of the superfluid flow of ultracold dilute Fermi gases in a one-dimensional optical lattice along the BCS to Bose-Einstein condensate (BEC) crossover within a mean-field approach. In each side of the crossover region, a loop structure (swallowtail) appears in the Bloch energy band of the superfluid above a critical value of the interaction strength. The width of the swallowtail is largest near unitarity. Across the critical value of the interaction strength, the profiles of density and pairing field change more drastically in the BCS side than in the BEC side. It is found that along with the appearance of the swallowtail, there exists a narrow band in the quasiparticle energy spectrum close to the chemical potential, and the incompressibility of the Fermi gas consequently experiences a profound dip in the BCS side, unlike in the BEC side.     

Temperature‐dependent Raman scattering study of multiferroic MnWO4

We have measured polarized Raman spectra of MnWO₄ single crystals at low temperatures, and studied the temperature dependence of the various phonon modes. From our Raman studies of the MnWO₄, a new transition temperature, ∼180 K, was found. We have completely assigned the symmetries of the 18 observed Raman modes of the MnWO₄, as expected from a group theoretical analysis. These Raman modes have been classified into three groups according to weak, intermediate and strong temperature dependence of the modes in each group. Six internal modes have been identified by their weak temperature dependence of the Raman wavenumbers. The temperature dependence of the wavenumbers of the B_g modes in Mg O bonds, modes of intermediate temperature dependence group, shows an anomalous behavior under 50 K. The phonon modes of strong temperature dependence show an anomalous change at ∼180 K in the linewidths. This is believed to be a new transition temperature which involves the changes in the inter‐WO₆ octahedra structure. Copyright © 2009 John Wiley & Sons, Ltd.     

Field Trial of 40 Gbit/s ETDM Prototype System over 219 km of Installed Single Mode Fiber

Transmission of 40Gbit/s NRZ signal was successfully demonstrated over 219km of installed SMF in KT's Daejeon area network. After transmission, the measured power penalty was 0.5dB for all the tributary channels.     

Acoustic diagnosis for porous medium with circular cylindrical pores

Acoustic transmission coefficient and phase velocity of a Lucite slab with circular cylindrical pores with a nonrigid pore frame were experimentally and theoretically investigated. For theoretical investigation a new phenomenological model, the modified Biot-Attenborough (MBA) model, was proposed. The MBA model takes into account both the first kind and the second kind of waves introduced by Biot. It also separately considers viscous and thermal effects with three new phenomenological parameters: boundary, phase velocity, and impedance parameters. The theoretical estimation with three phenomenological parameters shows reasonably good agreement with the experimental data. The physical characteristics of porous medium such as porosity and pore size can be inversely analyzed in terms of the acoustic data such as the transmission coefficient and phase velocity as the functions of porosity and frequency. This makes acoustic diagnosis possible for noninvasively investigating physical characteristics of porous media such as bones and ocean sediments.     

The emission wavelength tuning of InAs/InP quantum dots with thin GaAs, InGaAs, InP capping layers by MOCVD

InAs quantum dots (QDs) were grown on InP substrates by metalorganic chemical vapor deposition. The width and height of the dots were 50 and 5.8 nm, respectively on the average and an areal density of 3.0×10¹⁰ cm⁻² was observed by atomic force microscopy before the capping process. The influences of GaAs, In_0.53Ga_0.47As, and InP capping layers (5–10 ML thickness) on the InAs/InP QDs were studied. Insertion of a thin GaAs capping layer on the QDs led to a blue shift of up to 146 meV of the photoluminescence (PL) peak and an InGaAs capping layer on the QDs led to a red shift of 64 meV relative to the case when a conventional InP capping layer was used. We were able to tune the emission wavelength of the InAs QDs from 1.43 to 1.89 μm by using the GaAs and InGaAs capping layers. In addition, the full-width at half-maximum of the PL peak decreased from 79 to 26 meV by inserting a 7.5 ML GaAs layer. It is believed that this technique is useful in tailoring the optical properties of the InAs QDs at mid-infrared regime.     

Phase formation and control of morphology in sputtered Cu-In alloy layers

The dependence of structural properties and surface morphology of Cu-In alloy layers on the composition and sputtering deposition sequence were investigated by X-ray diffraction, scanning electron microscopy and energy-dispersive X-ray spectroscopy. The properties of the co-sputtered alloy layers changed abruptly around the composition boundary when the Cu/In ratio reached 1/2. This can be explained by the effective heat of formation (EHF) model, which has been used to predict the sequence of phase formation for metal diffusion couples. The use of a co-sputtered alloy layer with a high In concentration was not suitable for fabricating solar cells, because the film had a very rough morphology due to large In islands formed on the CuIn₂ phase. However, it was possible to minimize this phase by In sputtering followed by co-sputtering with a Cu/In ratio of 1 (Cu-In/In/Glass). This permitted the fabrication of a homogeneous Cu-In alloy layer, which was not possible through the simple co-sputtering.