Bandgap engineering of self-assembled InAs quantum dots with a thin AlAs barrier

We investigate the effects of a thin AlAs layer with different position and thickness on the optical properties of InAs quantum dots (QDs) by using transmission electron microscopy and photoluminescence (PL). The energy level shift of InAs QD samples is observed by introducing the thin AlAs layer without any significant loss of the QD qualities. The emission peak from InAs QDs directly grown on the 4 monolayer (ML) AlAs layer is blueshifted from that of reference sample by 219 meV with a little increase in FWHM from 42–47 meV for ground state. In contrast, InAs QDs grown under the 4 ML AlAs layer have PL peak a little redshifted to lower energy by 17 meV. This result is related to the interdiffusion of Al atom at the InAs QDs caused by the annealing effect during growing of InAs QDs on AlAs layer.     

High performance Zn–Sn–O thin film transistors with Cu source/drain electrode

Zn–Sn–O (ZTO) thin film transistors (TFTs) were fabricated with a Cu source/drain electrode. Although a reasonably high mobility (μ_FE) of 13.2 cm²/Vs was obtained for the ZTO TFTs, the subthreshold gate swing (SS) and threshold voltage (V_th) of 1.1 V/decade and 9.1 V, respectively, were inferior. However, ZTO TFTs with Ta film inserted as a diffusion barrier, exhibited improved SS and V_th values of 0.48 V/decade and 3.0 V, respectively as well as a high μ_FE value of 18.7 cm²/Vs. The improvement in the Ta‐inserted device was attributed to the suppression of Cu lateral diffusion into the ZTO channel region. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Biodegradable Holographic Polymer-Dispersed Liquid Crystal

The a-D-glucose was chemically modified with an allyl isocyanate (MG) and introduced into the polymer matrix for holographic polymer-dispersed liquid crystal (HPDLC), and the effects were studied in terms of morphology, grating formulation dynamics and electro-optical and biodegradable properties. Phase separation and diffraction efficiency increased at low content of (MG ≤ 4 wt%), while a rapid increase in crosslink density entrapped the LC droplets within the polymer to give poor phase separation, small droplet size, and low diffraction efficiency at high content. The HPDLC film was driven only with the addition of MG due to the increased droplet size with a minimum driving voltage of 18 V at 6.0 wt% MG. With the addition and an increasing amount of MG, the biodegradation of the composite film in a buffer solution was significantly increased in proportion to its amount.     

Properties of Graphene/Waterborne Polyurethane Nanocomposites Cast from Colloidal Dispersion Mixtures

Nanocomposites of waterborne polyurethane (WPU) reinforced with functionalized graphene sheets (FGSs) were effectively prepared by casting from a colloidal dispersion of FGS and WPU, and the morphology and physical properties were examined. The finer aqueous FGS dispersions or WPU with smaller particles yielded nanocomposites with enhanced electrical conductivity and thermal resistance due to finely dispersed FGS. The FGS nucleated the crystallization of the polycaprolactone (PCL) segments in WPU and improved its modulus. However, FGS inhibited crystal growth and deteriorated the tensile properties at high deformation, i.e., tensile strength and elongation at break, because the interaction between FGS and WPU hindered the chain rearrangement of WPU in the nanocomposite.     

Surfaces with simple geodesics through a point

We study compact connected surfaces inm-dimensional Euclidean spaceE ^m (3 m 5) with a point through which every geodesic is aW-curve regarded as a curve in E^m.     

Ruled real hypersurfaces of a complex space form

The purpose of this paper is to define a ruled real hypersurface of a complex space formM _n (c), c≠0, and to give characterizations of this hypersurface by the infinitesimal affine transformation of the structure vector field induced on the hypersurface. Supported by Grant for the Institute of Mathematics, the University of Tsukuba, and TGRC-KOSEF (1993).     

Transflective liquid-crystal display using low-twisted vertically aligned mode

We present the design of a transflective and low-power LCD using a low-twist vertically aligned liquid crystal (LC) cell, achieved by blending a chiral additive with a patterned reflector in a single-domain configuration. Unlike the conventional single-domain transflective LCD, in which it is possible to optimize only one of the transmissive and reflective regions, the device suggests that it is possible to optimize both the transmission and reflection design to obtain favorable results in both reflective and transmissive light conditions by optimizing the chiral pitch and twist angle. From the parameter space diagram (PSD) method, which does not include the information on chiral pitch and the nonuniform LC director tilt angle, optimization focused on the transmissive region is performed. By analyzing the relation between the transmittance and the chiral pitch under the applied voltage, the optimized twist angle and chiral pitch are proposed. It is described that the optimized twist angle is also available for the reflective region by the dynamic PSD method by considering the average tilt angle under applied voltage.