Photoswitching of holographic polymer-dispersed liquid crystals doped with chiral dopant

Chiral dopants were added to the formulation of holographic polymer-dispersed liquid crystals and the effects studied in terms of grating formation dynamics, morphology, diffraction efficiency, contrast ratio and electro-optical properties of the films. A gradual increase of real-time diffraction efficiency, decrease of droplet size and increase of diffraction efficiency of the composite film were obtained with the addition and increasing content of chiral dopant, due to the increased viscosity of the liquid crystal (LC) doped with the chiral dopant leading to decreased droplet coalescence. The contrast ratio decreased with increasing content of chiral dopant due to the difficult orientation of LC molecules caused by the formation of a helical structure. Addition of a small amount of the chiral dopant increased the driving voltage slightly, whereas the decay time is decreased significantly as a result of the high twisting of the helical structure.     

Current distribution and giant magnetoimpedance in composite wires with helical magnetic anisotropy

The giant magnetoimpedance effect in composite wires consisting of a non-magnetic inner core and soft magnetic shell is studied theoretically. It is assumed that the magnetic shell has a helical anisotropy. The current and field distributions in the composite wire are found by means of a simultaneous solution of Maxwell equations and the Landau–Lifshitz equation. The expressions for the diagonal and off-diagonal impedance are obtained for low and high frequencies. The dependences of the impedance on the anisotropy axis angle and the shell thickness are analyzed. Maximum field sensitivity is shown to correspond to the case of the circular anisotropy in the magnetic shell. It is demonstrated that the optimum shell thickness to obtain maximum impedance ratio is equal to the effective skin depth in the magnetic material.     

Phase formation and control of morphology in sputtered Cu-In alloy layers

The dependence of structural properties and surface morphology of Cu-In alloy layers on the composition and sputtering deposition sequence were investigated by X-ray diffraction, scanning electron microscopy and energy-dispersive X-ray spectroscopy. The properties of the co-sputtered alloy layers changed abruptly around the composition boundary when the Cu/In ratio reached 1/2. This can be explained by the effective heat of formation (EHF) model, which has been used to predict the sequence of phase formation for metal diffusion couples. The use of a co-sputtered alloy layer with a high In concentration was not suitable for fabricating solar cells, because the film had a very rough morphology due to large In islands formed on the CuIn₂ phase. However, it was possible to minimize this phase by In sputtering followed by co-sputtering with a Cu/In ratio of 1 (Cu-In/In/Glass). This permitted the fabrication of a homogeneous Cu-In alloy layer, which was not possible through the simple co-sputtering.     

Thermal and chemical nanofractal relaxation

We studied shape relaxation of nano-fractal islands, during annealing, after their growth from antimony cluster deposition on graphite surface. Annealing at 180^°C shows evidence of an increase of the fractal branch width with time followed by branch fragmentation, without changing the fractal dimension. The time evolution of the width of the arm suggests the surface self-diffusion mechanism as the main relaxation process. With Monte Carlo simulations, we confirmed the observed behavior. Comparison is done with our previous results on fragmentation of nano-fractal silver islands when impurity added to the incident cluster promotes rapid fragmentation by surface self-diffusion enhancement [1].     

The effect of surface crystalline layers on asymmetric off-diagonal magnetoimpedance in field-annealed CoFeSiB amorphous ribbons

The off-diagonal magnetoimpedance in field-annealed CoFeSiB amorphous ribbons was measured using a pick-up coil wound around the sample. One side of a ribbon was etched in hydrofluoric acid solution during various times in order to change the thickness of the surface crystalline layer appearing after annealing. The asymmetric two-peak field dependence of the off-diagonal impedance was observed for all samples. The evolution of the off-diagonal magnetoimpedance with the change in the ribbon thickness is analyzed.     

Dimensional variation in production of high-aspect-ratio micro-pillars array by micro powder injection molding

Micro powder injection molding (μPIM) is one of the potential processes for the mass production of metallic microstructures and micro components. Here, μPIM is the miniaturization of conventional PIM, which involves four processing steps: mixing, injection molding, debinding and sintering. This paper looks into the feasibility and effectiveness of μPIM as a key mass production process for the fabrication of metallic micro components. For it to be an effective re-production process, it is imperative to examine how well parts can be duplicated/fabricated from a master mold. In this work, the dimensional variation of high-aspect-ratio micro-pillars arrays, in particular the dimensional shrinkage, global warpage, and surface roughness at each stage of the μPIM process for a range of molding pressures, are quantified and compared in detail. The sensitivity of the dimensional variation of the microstructures to the packing pressure is reported. The mechanism behind the dimensional variation is analyzed. PACS 81.20.Ev; 81.20.Hy; 81.70.Fy; 07.60.Ly; 81.05.-t