Synthesis and Characterization of Triphenylphosphine Oxide-Containing Poly(Aryl Imide)-Poly(Dimethyl Siloxane) Randomly Segmented Copolymers

Abstract

Poly(aryl imide)-poly(dimethyl siloxane) randomly segmented copolymers were synthesized by essentially a one-step solution imidization process in a solvent system consisting of predominately o-dichlorobenzene with a small amount of n-methylpyrolidone. This solvent combination was selected because of its ability to afford homogeneous solutions throughout the polymerization process. This enabled copolymers of any desired poly(dimethyl siloxane) composition to be prepared. A hydrolytically stable triphenylphosphine oxide containing diamine, bis(3-amino-phenoxy-4′-phenyl)phenylphosphine oxide, was utilized as a chain extender and together with oxydiphthalic anhydride formed the hard segment in these copolymers. The soft segment was formed from α,ω-aminopropyl poly(dimethyl siloxane) oligomers of controlled molecular weight. The presence of phosphorus and silicon contributes several unique properties to the system, including enhanced solubility, thermal stability, and flame resistance. High molecular weight copolymers containing up to 60% (w/w) of the poly(dimethyl siloxane) segments were successfully prepared using this method. Gel permeation chromatography analysis, based on a universal calibration curve in CHCl₃, was performed to determine the molecular weights and distribution. These copolymers with 40-60% (w/w) poly(dimethyl siloxane) exhibited upper T_g values ranging from 130 to 180°C and showed substantial char yields at 750°C in air, which increased with siloxane content. Dynamic mechanical analysis confirmed the anticipated microphase behavior by the presence of two separate glass-transition regions. Both small angle x-ray scattering and transmission electron microscopy measurements determined on well-characterized transparent cast films were used to better demonstrate the multiphase nature of these copolymers.     

Aspirin-induced Bcl-2 translocation and its phosphorylation in the nucleus trigger apoptosis in breast cancer cells

Here, we report that B-cell lymphoma 2 (Bcl-2) is a novel target molecule of aspirin in breast cancer cells. Aspirin influenced the formation of a complex by Bcl-2 and FKBP38 and induced the nuclear translocation of Bcl-2 and its phosphorylation. These events inhibited cancer cell proliferation and subsequently enhanced MCF-7 breast cancer cell apoptosis. Bcl-2 knockdown using small interfering RNA (siRNA) delayed apoptotic cell death, which correlated with increased proliferation following aspirin exposure. In contrast, Bcl-2 overexpression enhanced the onset of aspirin-induced apoptosis, which was also associated with a significant increase in Bcl-2 phosphorylation in the nucleus. Therefore, this study may provide novel insight into the molecular mechanism of aspirin, particularly its anticancer effects in Bcl-2- and estrogen receptor-positive breast cancer cells.     

Separation of five oligostilbenes from Vitis amurensis by flow‐rate gradient high‐performance counter‐current chromatography

A rapid and efficient high‐performance counter‐current chromatography (HPCCC) method was developed to separate five oligostilbenes from the roots of Vitis amurensis. An n‐hexane/ethyl acetate/methanol/water system (4:8:4:10, v/v/v/v) was selected as an optimal two‐phase solvent system of which the upper phase was used as the stationary phase and the lower phase was used as the mobile one. Partition coefficient values for the target compounds under these optimized conditions were 0.28 ( 1 , ampleosin A), 7.12 ( 2 , (+)‐g‐viniferin), 2.26 ( 3 , vitisin A), 5.38 ( 4 , wilsonol C), and 11.23 ( 5 , vitisin B). Flow‐rate gradient HPCCC (4 mL/min in 0–70 min, 8 mL/min in 70–250 min) was applied to isolate the target compounds in as high purity as possible within the shortest possible run time. Under these conditions, ampelopsin A (12.1 mg), (+)‐g‐viniferin (10.4 mg), vitisin A (2.8 mg), wilsonol C (3.2 mg), and vitisin B (37 mg) were isolated with >95% purity from 150 mg of enriched oligostilbene extract. Although the K_D of the last eluted compound, vitisin B (K_D = 11.23), was relatively large, it was eluted in 115–145 min using the two‐phase solvent system. This study shows that HPCCC is an efficient tool for the isolation and purification of natural products.     

Polycondensation of Sebacic Acid with Primary and Secondary Hydroxyl Groups Containing Diols Catalyzed by Candida antarctica Lipase B

Abstract

The aliphatic polyesters are normally synthesized by ester interchange reactions or direct esterification of hydroxyacids or diacid/diol combinations. Biotransformation, utilizing the enzymes as catalysts, was accepted as an alternative route for the synthesis of aliphatic polyesters and offers various advantages compared with the conventional, metal-catalyzed polymerization reactions. Previous studies indicated that lipase-catalyzed polycondensation reactions between diols and diacids occurred preferentially at primary hydroxyl groups of diols, when diols contained both primary and secondary hydroxyl groups. In this work, we investigated lipase-catalyzed polycondensation of diacids and secondary hydroxyl group–containing diols, and successfully synthesized polyesters by polycondensation with secondary hydroxyl groups as well as primary hydroxyl groups. Various diols, glycerol, 1,2-propanediol, 1,3-butanediol, 2,3-butanediol, and 2,4-pentanediol were tested for the polycondensation. The polymerization was achieved by heating a mixture of lipase B, sebacic acid, and the diols in anhydrous toluene at 100 °C for 72 h. The resulting polymers were characterized by ¹H and ¹³C NMR spectroscopy, Fourier transform–infrared spectroscopy, thermogravimetric analysis, and gel permeation chromatography.     

Improved optical and electrical properties of sol–gel-derived boron-doped zinc oxide thin films

Sol–gel spin-coating was used to grow zinc oxide (ZnO) thin films doped with 0–2.5 at.% B on quartz substrates. The structural, optical, and electrical properties of the thin films were investigated using field-emission scanning electron microscopy, X-ray diffraction (XRD), photoluminescence (PL), ultraviolet–visible spectroscopy, and van der Pauw Hall-effect measurements. All the thin films had deposited well onto the quartz substrates and exhibited granular morphology. The average crystallite size, lattice constants, residual stress, and lengths of the bonds in the crystal lattice of the thin films were calculated from the XRD data. The PL spectra showed near-band-edge (NBE) and deep-level emissions, and B doping varied the PL properties and increased the efficiency of the NBE emission. The optical transmittance spectra for the undoped ZnO and boron-doped zinc oxide (BZO) thin films show that the optical transmittance of the BZO thin films was significantly higher than that of the undoped ZnO thin films in the visible region of the spectra and that the absorption edge of the BZO thin films was blue-shifted. In addition, doping the ZnO thin films with B significantly varied the absorption coefficient, optical band gap, Urbach energy, refractive index, extinction coefficient, single-oscillator energy, dispersion energy, average oscillator strength, average oscillator wavelength, dielectric constant, and optical conductivity of the BZO thin films. The Hall-effect data suggested that B doping also improved the electrical properties such as the carrier concentration, mobility, and resistivity of the thin films.     

Rapid and sensitive detection of lower respiratory tract infections by stuffer‐free multiplex ligation‐dependent probe amplification

Lower respiratory tract infection is one of the most common infectious diseases. However, conventional methods for detecting infectious pathogens are time‐consuming, and generally have a limited impact on early therapeutic decisions. We previously reported a rapid and sensitive method for detecting such pathogens using stuffer‐free multiplex ligation‐dependent probe amplification coupled with high‐resolution CE‐SSCP. In this study, we report an application of this method to the detection of respiratory pathogens. As originally configured, this method was capable of simultaneously detecting seven bacterial species responsible for lower respiratory tract infections, but its detection limit and assay time were insufficient to provide useful information for early therapeutic decisions. To improve sensitivity and shorten assay time, we added a target‐specific preamplification step, improving the detection limit from 50 pg of genomic DNA to 500 fg. We further decreased time requirements by optimizing the hybridization step, enabling the entire assay to be completed within 7 h while maintaining the same detection limit. Taken together, these improvements enable the rapid detection of infectious doses of pathogens (i.e. a few dozen cells), establishing the strong potential of the refined method, particularly for aiding early treatment decisions.     

A one-pot tandem synthesis of various 1,2-disubstituted benzimidazoles

A facile method to synthesize various 1,2-disubstituted benzimidazoles is developed. It is suggested that formation of a Meisenheimer adduct between the substrate, amine, and solvent aids the N-arylation process. The generality of the protocol is demonstrated by the efficient reactions involving numerous substituents ranging from electron-withdrawing groups to electron-donating groups.     

Nucleophile‐Dependent Regio‐ and Stereoselective Ring Opening of 1‐Azoniabicyclo[3.1.0]hexane Tosylate

1‐[(1R)‐(1‐Phenylethyl)]‐1‐azoniabicyclo[3.1.0]hexane tosylate was generated as a stable bicyclic aziridinium salt from the corresponding 2‐(3‐hydroxypropyl)aziridine upon reaction with p‐toluenesulfonyl anhydride. This bicyclic aziridinium ion was then treated with various nucleophiles including halides, azide, acetate, and cyanide in CH₃CN to afford either piperidines or pyrrolidines through regio‐ and stereoselective ring opening, mediated by the characteristics of the applied nucleophile. On the basis of DFT calculations, ring‐opening reactions under thermodynamic control yield piperidines, whereas reactions under kinetic control can yield both piperidines and pyrrolidines depending on the activation energies for both pathways.     

Prediction of African Swine Fever Virus Inhibitors by Molecular Docking-Driven Machine Learning Models

African swine fever virus (ASFV) causes a highly contagious and severe hemorrhagic viral disease with high mortality in domestic pigs of all ages. Although the virus is harmless to humans, the ongoing ASFV epidemic could have severe economic consequences for global food security. Recent studies have found a few antiviral agents that can inhibit ASFV infections. However, currently, there are no vaccines or antiviral drugs. Hence, there is an urgent need to identify new drugs to treat ASFV. Based on the structural information data on the targets of ASFV, we used molecular docking and machine learning models to identify novel antiviral agents. We confirmed that compounds with high affinity present in the region of interest belonged to subsets in the chemical space using principal component analysis and k-means clustering in molecular docking studies of FDA-approved drugs. These methods predicted pentagastrin as a potential antiviral drug against ASFVs. Finally, it was also observed that the compound had an inhibitory effect on AsfvPolX activity. Results from the present study suggest that molecular docking and machine learning models can play an important role in identifying potential antiviral drugs against ASFVs.