Complexation of Eu3+ and Am3+ with soil humic acid extracted from Okchon Basin of Korean Peninsula

The complexation of Eu³⁺ and Am³⁺ ions with the humic acids has been investigated at various pH (4.0, 4.5, 5.0, 5.4) in 0.1M NaClO₄ solution using solvent extraction technique. Two humic acids are used in this study: humic acid extracted from the soil of Taejon on the Okchon Basin of Korea (TJHA) and commercially available one from Aldrich Chemical Co. (AHA). The total carboxylate group concentrations were determined to be 3.58 meq/g and 4.59 meq/g for Taejon and Aldrich humic acids, respectively. The conditional stability constants (log ₁ and log ₂), dependent on the pH of the solution, of the complexes of Eu³⁺ and Am³⁺ ions with the humic acids have been determined at the ionic medium of 0.1M NaClO₄. The values of stability constants with the degree of ionization of TJHA for Eu and Am complexes are quite well agreed with those of Lake Bradford humic acid (LBHA), indicating that structural characteristics of TJHA and LBHA may be quite similar to one another.     

Optimization of a radioanalytical procedure for the determination of uranium isotopes in environmental samples

A radiochemical procedure is described for the fast and sensitive measurement of uranium isotopes in gaseous and liquid effluents of nuclear facilities. Equally, this procedure is suitable to measure uranium isotopes in all kinds of environmental samples. Uranium is leached from ashed sample materials with HNO₃, HF, and Al(NO₃)₃ solution and separated from matrix elements by extraction with trioctylphosphinic oxide and backextraction with NH₄F. After radiochemical cleaning by coprecipitation with LaF₃ and anion exchange, uranium isotopes are electroplated on stainless steel discs from HCl/oxalate solution. The preparation is measured by alpha-spectrometry using surface barrier detectors. The detection limit for 1000 minutes of counting time is 2 mBq per sample and nuclide, the chemical yield is in the range of 50 to 80%.     

Sustainable biorefinery processes using renewable deep eutectic solvents

1. Download : Download high-res image (194KB)
2. Download : Download full-size image

     

Metabolite Profiling and Characterization of LW6, a Novel HIF-1α Inhibitor,as an Antitumor Drug Candidate in Mice

A novel HIF (hypoxia-inducible factor)-1α inhibitor, the (aryloxyacetylamino)benzoic acid derivative LW6, is an anticancer agent that inhibits the accumulation of HIF-1α. The aim of this study was to characterize and determine the structures of the metabolites of LW6 in ICR mice. Metabolite identification was performed using a predictive multiple reaction monitoring-information dependent acquisition-enhanced product ion (pMRM-IDA-EPI) method in negative ion mode on a hybrid triple quadrupole-linear ion trap mass spectrometer (QTRAP). A total of 12 metabolites were characterized based on their MS/MS spectra, and the retention times were compared with those of the parent compound. The metabolites were divided into five structural classes based on biotransformation reactions: amide hydrolysis, ester hydrolysis, mono-oxidation, glucuronidation, and a combination of these reactions. From this study, 2-(4-((3r,5r,7r)-adamantan-1-yl)phenoxy)acetic acid (APA, M7), the metabolite produced via amide hydrolysis, was found to be a major circulating metabolite of LW6 in mice. The results of this study can be used to improve the pharmacokinetic profile by lowering the clearance and increasing the exposure relative to LW6.     

Hexaazatriphenylene-Based Two-Dimensional Conductive Covalent Organic Framework with Anisotropic Charge Transfer

The development of covalent organic frameworks (COFs) with efficient charge transport is of immense interest for applications in optoelectronic devices. To enhance COF charge transport properties, electroactive building blocks and dopants can be used to induce extended conduction channels. However, understanding their intricate interplay remains challenging. We designed and synthesized a tailor-made COF structure with electroactive hexaazatriphenylene (HAT) core units and planar dioxin (D) linkages, denoted as HD-COF. With the support of theoretical calculations, we found that the HAT units in the HD-COF induce strong, eclipsed π–π stacking. The unique stacking of HAT units and the weak in-plane conjugation of dioxin linkages leads to efficient anisotropic charge transport. We fabricated HD-COF films to minimize the grain boundary effect of bulk COFs, which resulted in enhanced conductivity. As a result, the HD-COF films showed an electrical conductivity as high as 1.25 S cm⁻¹ after doping with tris(4-bromophenyl)ammoniumyl hexachloroantimonate.     

Uniqueness and clustering properties of Gibbs states for classical and quantum unbounded spin systems

We consider quantum unbounded spin systems (lattice boson systems) in -dimensional lattice space Z. Under appropriate conditions on the interactions we prove that in a region of high temperatures the Gibbs state is unique, is translationally invariant, and has clustering properties. The main methods we use are the Wiener integral representation, the cluster expansions for zero boundary conditions and for general Gibbs state, and explicitly -dependent probability estimates. For one-dimensional systems we show the uniqueness of Gibbs states for any value of temperature by using the method of perturbed states. We also consider classical unbounded spin systems. We derive necessary estimates so that all of the results for the quantum systems hold for the classical systems by straightforward applications of the methods used in the quantum case.     

Reexamine structures and relative stability of medium-sized silicon clusters: Low-lying endohedral fullerene-like clusters Si30-Si38

We report improved results of lowest-lying silicon clusters Si₃₀-Si₃₈. A large population of low-energy clusters are collected from previous searches by several research groups and the binding energies of these clusters are computed using density-functional theory (DFT) methods. Best candidates (isomers with high binding energies) are identified from the screening calculations. Additional constrained search is then performed for the best candidates using the basin-hopping method combined with DFT geometry optimization. The obtained low-lying clusters are classified according to binding energies computed using either the Perdew-Burke-Ernzerhof (PBE) functional or the Becke exchange and Lee-Yang-Parr correlation (BLYP) functional. We propose to rank low-lying clusters according to the mean PBE/BLYP binding energies in view that the PBE functional tends to give greater binding energies for more compact clusters whereas the BLYP functional tends to give greater binding energies for less compact clusters or clusters composed of small-sized magic-number clusters. Except for Si₃₀, the new search confirms again that medium-size silicon clusters Si₃₁-Si₃₈ constructed with proper fullerene cage motifs are most promising to be the lowest-energy structures.     

Wide range parametric study for the pool boiling of nano-fluids with a circular plate heater

The characteristics of boiling and critical heat flux (CHF) behavior of nano-fluids with alumina and silver nano-particles suspended in de-ionized water (pure water) were studied with circular plate heaters in the present study. Enhancements of CHF in nano-fluids in the wide range of particle sizes and concentrations were compared with those in pure water. Also, the effects of the particle deposition on CHF enhancement were investigated. All experiments were performed at the atmospheric pressure condition. The results show that the measured boiling curves in nano-fluids were shifted to the right and CHF were significantly enhanced for different nano-particle sizes and concentrations. The CHF of nano-fluids was increased as the size of the nano-particles decreased. On the other hand, nano-particle concentration value showing the maximum CHF had a critical value. In each pool boiling experiment of nano-fluids, nano-particles were deposited on the heater surface. Assuming that this phenomenon caused the CHF enhancement, pool boiling experiments of pure water were carried out with these nano-particle deposited heaters. The results of these tests were similar to those of the test of the nano-fluids for the CHF enhancement. The main cause of CHF enhancement was found to be the change of the heater surface structure. In order to analyze boiling phenomena of pure water and Al₂O₃ nano-fluids, boiling process was visualized by using a high speed camera.     

Time-resolved plasma diagnostics and mass removal during single-pulse laser ablation

Laser ablation processes occurring over several orders of magnitude in time were investigated by using time-resolved spectroscopy, shadowgraphs and interferograms. A picosecond ablation plasma was measured with an electron density on the order of 10²⁰ cm^-3 originating from the breakdown of air. The longitudinal expansion of this plasma was suppressed due to the development of a strong space-charge field. At post-pulse times, the lateral (radial) expansion of the plasma was found to follow the relation, r~t^1/2, consistent with the expansion from an instantaneous line source of energy. The electron number density and temperature were deduced by measuring spectroscopic emission-line broadening during the early phase (30-300 ns) of a mass (atomic/ionic) plasma. These properties were measured as a function of the delay time and irradiance. Possible mechanisms such as inverse bremsstrahlung and self-regulation were used to describe the data before an explosion threshold of 20 GW/cm². The laser self-focusing and critical temperature are discussed to explain dramatic changes in these properties after the irradiance threshold. On the microsecond time scale, the surface explodes and large (>7m) particles are ejected. Mass removed from single-crystal silicon by high power (10⁹-10¹¹ W/cm²) single-pulse laser ablation is studied by measuring the crater morphology. Time-resolved shadowgraph images show that the rapid increase in the crater depth at the threshold corresponds to large-size droplets leaving the surface. This rapid growth of the crater volume is attributed to explosive boiling.