阳离子交换皂石黏土在基质辅助激光解吸电离飞行时间质谱分析中的应用

将一种人工合成的无机聚合物——蒙脱石皂石黏土（smectite,Sm）应用于基质辅助激光解吸电离飞行时间质谱分析（matrix-assisted laser desorption/ionization time of flight mass spectrometry, MALDI-TOF-MS）,以检测糖类化合物。 将传统的有机基质2,4,6-三羟基苯乙酮（trihydroxyacetophenone, THAP）与阳离子交换后的皂石黏土混合制备成新型复合基质,应用于糖类化合物的检测。通过比较不同的制样方法,测定不同分子直径的糖类化合物,发现由于受复合基质晶面间距的限制,只有小分子糖类化合物能进入晶面间隙充分接触有机基质并被离子化,从而实现对小分子糖类化合物的选择性检测。     

天然气管道泄漏可调谐二极管激光遥感探测的研究

天然气管道泄漏不仅造成经济损失而且是危险之源。传统的天然气管道泄漏检测技术效率低、速度慢,难以满足实际应用的需要。近年来以近红外二极管激光吸收光谱为基础的光学传感器由于具有灵敏度高、体积小、重量轻和无需维护等优点而得到了广泛的应用。文章以可调谐二极管激光吸收光谱和谐波探测技术为基础进行天然气管道泄漏遥感探测技术的研究,采用二次谐波与一次谐波信号的比值作为系统浓度标定,结果显示浓度与比值之间具有较好的一致性。文章还就不同地形散射体对探测结果的影响进行了测量和分析,实验结果表明二次谐波与一次谐波信号比值标定技术对便携式二极管激光光学测量能够很好的满足实际应用的需要。     

3-溴-4-丁氧基-4'-硝基偶氮苯三阶非线性光学性能的研究

采用Z扫描技术对一种新的偶氮苯类化合物的三阶非线性光学系数进行了测量.实验结果的分析表明,该化合物具有较大的三阶非线性极化率;其三阶非线性主要来源于强的π电子离域性.     

Theoretical investigation of the crystallographic structure,anisotropic elastic response,and electronic properties of the major borides in Ni-based superalloys

ABSTRACT

In Ni-based superalloys, it is usually found that borides can strengthen the grain boundaries, thereby resulting in an increase in mechanical strength and high-temperature creep properties. Due to their importance and prevalence in Ni-based superalloys, this study employs first-principles methods to investigate the crystallographic structure, anisotropic elastic response, and electronic properties of the major borides, such as M₂B, M₅B₃ and M₃B₂ (M: Cr, Mo, W), respectively, which is necessary for the assessment of complex mechanical responses of Ni-based superalloys. The results demonstrate that the studied borides are all thermodynamically and mechanically stable. Among the M _x B _y binary borides analysed, Cr _x B _y exhibits the largest shear modulus, Young’s modulus, and Vicker hardness values, and these properties increase with the increase of B contents. The studied borides display nearly isotropic elastic properties except for W₅B₃ and W₃B₂. The electronic structure analysis of M _x B _y shows that the strong hybridisation between M-d and B-p orbitals leads to these borides exhibiting higher theoretical hardness, and the overlapping peaks of M-d and B-p orbitals move to a lower energy area with the increase of B contents, which leads to the increase of shear and Young’s moduli of M _x B _y . Furthermore, for M₃B₂ borides, the Cr-B bonds and Cr–Cr bonds are much stronger than the W-B & Mo-B bonds, and W-W & Mo-Mo bonds, respectively, which leads to Cr _x B _y yielding the largest values of elastic moduli.     

An improved evaluation of the neutron background in the PandaX-Ⅱ experiment

In dark matter direct detection experiments,neutron is a serious source of background,which can mimic the dark matter-nucleus scattering signals.In this paper,we present an improved evaluation of the neutron background in the PandaX-II dark matter experiment by a novel approach.Instead of fully relying on the Monte Carlo simulation,the overall neutron background is determined from the neutron-induced high energy signals in the data.In addition,the probability of producing a dark-matter-like background per neutron is evaluated with a complete Monte Carlo generator,where the correlated emission of neutron(s)andγ(s)in the(α,n)reactions and spontaneous fissions is taken into consideration.With this method,the neutron backgrounds in the Run 9(26-ton-day)and Run 10(28-ton-day)data sets of PandaX-II are estimated to be(0.66±0.24)and(0.47±0.25)events,respectively.     

Polarization in D-shaped fiber modulated by magneto-optical dichroism of magnetic fluid

The polarization of a D-shaped fiber is modulated after immersing it in magnetic fluid(MF)and applying a magnetic field.Theoretical analysis predicts that magneto-optical dichroism of MF plays a key role in light polarization modulation.During light polarization modulation,the evanescent wave polarized parallel to the magnetic field has greater loss than its orthogonal component.Light polarization of a D-shaped fiber with a wide polished surface can be modulated easily.High concentration MF and a large magnetic field all have great ability to modulate light polarization.     

Multi-Objective Optimization of Braun-Type Exothermic Reactor for Ammonia Synthesis

The exothermic reactor for ammonia synthesis is a primary device determining the performance of the energy storage system. The Braun-type ammonia synthesis reactor is used as the exothermic reactor to improve the heat release rate. Due to the entirely different usage scenarios and design objectives, its parameters need to be redesigned and optimized. Based on finite-time thermodynamics, a one-dimensional model is established to analyze the effects of inlet gas molar flow rate, hydrogen–nitrogen ratio, reactor length and inlet temperature on the total entropy generation rate and the total exothermic rate of the reactor. It’s found that the total exothermic rate mainly depends on the inlet molar flow rate. Furthermore, considering the minimum total entropy generation rate and maximum total exothermic rate, the NSGA-II algorithm is applied to optimize seven reactor parameters including the inlet molar flow rate, lengths and temperatures of the three reactors. Lastly, the optimized reactor is obtained from the Pareto front using three fuzzy decision methods and deviation index. Compared with the reference reactor, the total exothermic rate of the optimized reactor is improved by 12.6% while the total entropy generation rate is reduced by 3.4%. The results in this paper can provide some guidance for the optimal design and application of exothermic reactors in practical engineering.     

INHERITANCE OF DIVISIBILITY FORMS A LARGE SUBALGEBRA

Let A be an infinite dimensional stably finite unital simple separable C^*-algebra.Let B■A be a stably(centrally)large subalgebra in A such that B is m-almost divisible(m-almost divisible,weakly(m,n)-divisible).Then A is 2(m+1)-almost divisible(weakly m-almost divisible,secondly weakly(m,n)-divisible).     

Dissipation Behavior and Acute Dietary Risk Assessment of Thiamethoxam and Its Metabolite Clothianidin on Spinach

Thiamethoxam and its metabolite clothianidin residues pose a potential threat to human health. This study aims to investigate the residue behavior and acute dietary risk assessment of thiamethoxam and clothianidin on spinach. Thiamethoxam and clothianidin were extracted using a quick, easy, cheap, effective, rugged, safe (QuEChERS) method and analyzed using liquid chromatography-tandem mass spectrometry (LC-MS/MS). At spike levels from 0.01 to 5 mg kg⁻¹, the average recoveries of both analytes were in the range of 94.5–105.5%, with relative standard deviations (RSDs) of 3.8–10.9%. The dissipation behavior of thiamethoxam followed first-order kinetics, with half-lives of ≤1.6 days. Clothianidin appeared readily as a plant metabolite with highest level exhibited during 3 to 5 days after application. Temperature and light may be two main factors for degradation of thiamethoxam. Besides, acute risk assessment of thiamethoxam and clothianidin was evaluated with risk quotients (RQs) <100%, which suggested a low health risk for all consumer groups of Chinese residents.     

Structure and Processing Properties of Nine Yam (Dioscorea opposita Thunb) Starches from South China: A Comparison Study

In order to explore the processing and application potential of Chinese yam starch, nine kinds of Chinese yam starch (GY11, GY5, GY2, GXPY, LCY, SFY, MPY, SYPY, ASY) from South China were collected and characterized. The chemical composition, rheological properties, thermal properties, and in vitro starch digestion were compared, and the correlation between the structure and processing properties of these yam starches was analyzed using Pearson correlation. The results show that GY2 had the highest amylose content of 28.70%. All the yam starches were similarly elliptical, and all the yam starch gels showed pseudoplastic behavior. Yam starches showed similar pasting temperatures and resistant starch content, but SYPY showed the largest particle size (28.4 μm), SFY showed the highest setback (2712.33 cp), and LCY showed the highest peak viscosity (6145.67 cp) and breakdown (2672.33 cp). In addition, these yam starches also showed different crystal types (A-type, B-type, C-type), relative crystallinity (26.54–31.48%), the ratios of 1045/1022 cm⁻¹ (0.836–1.213), pasting properties, and rheological properties, so the yam starches have different application potentials. The rheological and pasting properties were related to the structural properties of starch, such as DI, Mw, and particle size, and were also closely related to the thermodynamic properties. The appropriate processing methods and purposes of the processed products of these yam starches can be selected according to their characteristics.