Theoretical kinetic study on the decomposition of 1,5‐diaminotetrazole

1,5‐Daminotetrazole (DAT) is of much interest because of the practical significance and the diversity of characteristics. The study on the decomposition pathway and the kinetics of DAT has been performed based on the quantum chemistry theory. The minimum energy path (MEP) calculation has shown that NH₂N₃ and NH₂CN are the initially detected products of DAT. And the structures of reactant, products and transition state were optimized with MP2 methods using 6‐311G** basis sets, and the energies were refined using CCSD(T)/6‐311G** levels of theory. The calculated rate constants were obtained using the conventional transition‐state theory (TST) and the canonical variational transition‐state theory (CVT) methods. The calculation results indicated that the energy barrier of decomposition reaction is 47.98 kcal mol^?1 and the variational effect is small. In addition, the rate constants and the Arrhenius experience formula of DAT decomposition have been obtained between 200 and 2500 K temperature regions. The fitted three‐parameter expressions calculated using the TST and CVT methods are (TST) and (CVT). This work may provide the theoretical support for further experimental synthesis and testing. Copyright © 2015 John Wiley & Sons, Ltd.     

Comparison of cadmium manganese telluride crystals grown by traveling heater method and vertical Bridgman method

In this paper, the CdMnTe crystals were grown by the Travelling Heater Method (THM) and the Vertical Bridgman (VB) method, respectively. The crystal properties, including the Mn axial distribution, impurity concentrations, resistivity, Hall effects and energy response spectra, were characterized and compared. The results shown that the CdMnTe crystal grown by the THM had more uniform Mn distribution and lower impurity concentrations compared to the crystal grown by VB method. The resistivity of CdMnTe grown by THM was (1.5 ∼ 8) × 10¹⁰ Ω.cm, while the resistivity of CdMnTe grown by VB was 10⁷∼10⁸ Ω.cm. The In dopant distributed uniformly throughout the crystal ingot grown by THM with the doping concentration of 0.6–0.7 ppm, while the In dopant concentration throughout the crystal grown by VB method is in the range of 1.31–2.4 ppm. Hall measurements revealed that the conductivity of the THM grown crystal was weak n‐type conductivity and the VB grown crystal was p‐type conductivity. A planar CdMnTe detector from the THM grown crystal showed a resolution of 8% of the ²⁴¹Am radiation at 59.5 keV peak, however, no energy response was revealed with the CdMnTe detector by the VB method. The results demonstrate that CdMnTe crystal grown by THM have better crystal quality and detector properties compared to that by VB method.     

[B30]−: A Quasiplanar Chiral Boron Cluster

Chirality is vital in chemistry. Its importance in atomic clusters has been recognized since the discovery of the first chiral fullerene, the D₂ symmetric C₇₆. ¹ A number of gold clusters have been found to be chiral, ² raising the possibility to use them as asymmetric catalysts. The discovery of clusters with enantiomeric structures is essential to design new chiral materials with tailored chemical and physical properties. ³ Herein we report the first inherently chiral boron cluster of [B₃₀]^? in a joint photoelectron spectroscopy and theoretical study. The most stable structure of [B₃₀]^? is found to be quasiplanar with a hexagonal hole. Interestingly, a pair of enantiomers arising from different positions of the hexagonal hole are found to be degenerate in our global minimum searches and both should co‐exist experimentally because they have identical electronic structures and give rise to identical simulated photoelectron spectra.     

Uncovering the Stoichiometry of Pyrococcus furiosus RNase P,a Multi‐Subunit Catalytic Ribonucleoprotein Complex,by Surface‐Induced Dissociation and Ion Mobility Mass Spectrometry

We demonstrate that surface‐induced dissociation (SID) coupled with ion mobility mass spectrometry (IM‐MS) is a powerful tool for determining the stoichiometry of a multi‐subunit ribonucleoprotein (RNP) complex assembled in a solution containing Mg²⁺. We investigated Pyrococcus furiosus (Pfu) RNase P, an archaeal RNP that catalyzes tRNA 5′ maturation. Previous step‐wise, Mg²⁺‐dependent reconstitutions of Pfu RNase P with its catalytic RNA subunit and two interacting protein cofactor pairs (RPP21?RPP29 and POP5?RPP30) revealed functional RNP intermediates en route to the RNase P enzyme, but provided no information on subunit stoichiometry. Our native MS studies with the proteins showed RPP21?RPP29 and (POP5?RPP30)₂ complexes, but indicated a 1:1 composition for all subunits when either one or both protein complexes bind the cognate RNA. These results highlight the utility of SID and IM‐MS in resolving conformational heterogeneity and yielding insights on RNP assembly.     

A Small‐Molecule FRET Reporter for the Real‐Time Visualization of Cell‐Surface Proteolytic Enzyme Functions

Real‐time imaging of cell‐surface‐associated proteolytic enzymes is critical to better understand their performances in both physiological and pathological processes. However, most current approaches are limited by their complexity and poor membrane‐anchoring properties. Herein, we have designed and synthesized a unique small‐molecule fluorescent probe, which combines the principles of passive exogenous membrane insertion and Förster resonance energy transfer (FRET) to image cell‐surface‐localized furin‐like convertase activities. The membrane‐associated furin‐like enzymatic cleavage of the peptide probe leads to an increased fluorescence intensity which was mainly localized on the plasma membrane of the furin‐expressed cells. This small‐molecule fluorescent probe may serve as a unique and reliable reporter for real‐time visualization of endogenous cell‐surfaceassociated proteolytic furin‐like enzyme functions in live cells and tissues using one‐photon and two‐photon microscopy.     

Micellization of anionic gemini surfactants and their interaction with polyacrylamide

A series of anionic gemini surfactants have been synthesized. The surface properties and micellization process of as-prepared sulfonate gemini surfactants (SGS) and carboxylate gemini surfactant (CGS) have been studied by surface tension measurement and isothermal titration microcalorimetry. Meanwhile, the interaction of these five surfactants with polyacrylamide (PAM) was investigated using surface tension, steady-state fluorescence measurement, and isothermal titration microcalorimetry. The results show that the critical micelle concentrations (CMCs) of above-mentioned surfactants are more than 1 order of magnitude lower than those of corresponding single chain surfactants. Moreover, the enthalpy of micelle formation (ΔH _mic) for the investigated gemini surfactants is negative. In the surfactant–PAM systems, the thermodynamic parameters of binding have also been determined. The conclusion may be drawn that the binding strength of SGS onto PAM is stronger than that of CGS, resulting from more compact structure of SGS aggregates. With increasing surfactant hydrophobicity, the values of ΔH _agg become more exothermic and a ΔS _agg decrease was observed. Therefore, the interaction between SGS and PAM is enthalpy-driven.     

Optimization of SIMS analytical parameters for water content measurement of olivine

Secondary ion mass spectrometry (SIMS) has a wide range of applications in Earth Science research, thanks to its high precision and sensitivity, and its capacity in direct insitu micromeasurement. The technique is operated in ultra-high vacuum (UHV) conditions, especially for the measurement of volatiles such as hydrogen, or the water content in nominally anhydrous minerals (NAMs). To minimize the water background and obtain accurate and precise water contents in NAMs (eg, olivine) critical parameters such as presputtering time, field aperture (FA), dynamic transfer on/off, and primary beam current intensity were investigated for a CAMECA IMS 1280-HR system. When the chamber vacuum reaches approximately 2 × 10⁻⁹ mbar, we set the DTOS OFF, raster size to 50 μm and primary beam current to 5 nA, and used 2000 μm FA and 170-second presputtering time. Consequently, an approximately 1.2 ppmw water background and 3.6 ppmw limit of detection (LOD) were yielded, from analyzing the San Carlos olivine. Meanwhile, the water content and homogeneity of a range of olivine minerals were characterized for potential use as reference materials for SIMS water content measurement. Olivine water content calibration curve was also established by comparing the Fourier transform infrared (FTIR) results with the SIMS-measured ¹⁶O¹H⁻/¹⁶O⁻ ratios. Accuracy and precision of water content measurement were estimated to be better than approximately 10% in this study.     

The inhibition profiles of 4'-acylpyrrole–5-fluoroindolin-2-ones with a C-3' side chain for VEGFR2, PDGFR-β, and FGFR-1 protein kinases

In this study, we reported the inhibition profiles of 4′-acylpyrrole–5-fluoroindolin-2-one 3 with a C-3′ side chain for VEGFR2, PDGFR-β, and FGFR-1 protein kinases. The pyrrole-fused cyclohexanone moiety provided 3 with the best potency to inhibit the three kinases, and the C-3′ side chains contributed to the different inhibition profiles of 3 . Compound 3b with a C-3′ 2-carboxylethyl side chain showed good potency for the three kinase (IC₅₀: 25–260 nM), and compound 3g with a N,N-dialkyl-2-carbamoylethyl side chain was more active for VEGFR2 (IC₅₀: 59 nM) and PDGFR-β (IC₅₀: 16 nM) than FGFR-1 (IC₅₀: 1.7 μM). The C-3′ 3-(dialkylamino)propyl side chain accomplished 3h – j as selective PDGFR-β inhibitors (IC₅₀: 7.8–13 nM). Compound 3b was further investigated and found potent to inhibit VEGF- and FGF-dependent cell proliferation with moderate in vivo anticancer activity. Results from docking simulations revealed that the interactions of 3b with VEGFR2 and FGFR-1 which could account for the different inhibition profiles of 3 .     

Deciphering an Abnormal Layered-Tunnel Heterostructure Induced by Chemical Substitution for the Sodium Oxide Cathode

Demands for large-scale energy storage systems have driven the development of layered transition-metal oxide cathodes for room-temperature rechargeable sodium ion batteries (SIBs). Now, an abnormal layered-tunnel heterostructure Na_0.44Co_0.1Mn_0.9O₂ cathode material induced by chemical element substitution is reported. By virtue of beneficial synergistic effects, this layered-tunnel electrode shows outstanding electrochemical performance in sodium half-cell system and excellent compatibility with hard carbon anode in sodium full-cell system. The underlying formation process, charge compensation mechanism, phase transition, and sodium-ion storage electrochemistry are clearly articulated and confirmed through combined analyses of in situ high-energy X-ray diffraction and ex situ X-ray absorption spectroscopy as well as operando X-ray diffraction. This crystal structure engineering regulation strategy offers a future outlook into advanced cathode materials for SIBs.     

Design,synthesis and insecticidal-activity evaluation of N-pyridylpyrazolo-5-methyl amines and its derivatives

In searching for novel insecticidal leads, a series of N-pyridylpyrazolo-5-methyl amines and their derivatives were designed and synthesized. Among the 22 target compounds obtained, bioassays indicated that some of the target compounds exhibited good insecticidal activities against Plutella xylostella (P. xylostella) and Spodoptera frugiperda (S. frugiperda). In particular, compound 9j revealed the best insecticidal activity against P. xylostella, with a LC₅₀ value of 22.11 mg/L, and compound 9q had the best insecticidal activity against S. frugiperda which with 73.99% of mortality rate at 100 mg/L. Structure-activity relationship (SAR) analysis showed that 4-CF₃ at the position of R¹ linked with N-pyridylpyrazole via amide bond could enhance the insecticidal activity of the target compounds. This study provides valuable clues for the further design and optimization of N-pyridylpyrazole derivatives.