石墨烯量子点的磁性及激发态性质

利用密度泛函理论在B3LYP/6-31G(d)基组水平上研究了具有zigzag边界的石墨烯量子点,结果表明不同大小的石墨烯量子点的基态都是具有磁性的自旋三重态.其磁性一方面来源于zigzag边界上占有凸出位置的碳原子,另一方面来源于带有孤对电子的碳原子.从整体上看,除6b结构外,其他结构的能隙随着苯环数量的增加逐渐减小,而附加电荷却使体系能隙明显减小.用含时密度泛函理论(TD-DFT)对能隙为3.83 eV的由六个苯环排列成的三角形结构进行了激发态的计算,发现第十七激发态强度最大,能量为3.93 eV,对 关键词： 石墨烯量子点 磁性 能隙 激发态     

输入方波信号的过阻尼谐振子的随机共振

计算了在输入方波信号情况下过阻尼谐振子的输出功率谱和信噪比,详细讨论了相应的随机共振现象,并与输入余弦信号情况进行对比.研究发现:它们均出现随机共振现象,且均存在共振和抑制并存的现象.但这一并存现象,在两模型中分别出现于不同的共振曲线. 关键词： 过阻尼谐振子 随机共振 方波信号     

掺Er光纤飞秒激光器载波包络位相偏移的探测

本文介绍了基于掺Er光纤飞秒激光器光学频率梳中光学部分的研制. 实验上采用重复频率为230 MHz的掺Er光纤飞秒激光器,通过放大、光谱展宽以及单臂f—2f系统,在优化及分析相关参数影响的基础上,获得了~30 dB信噪比f₀的输出,为光纤光学频率梳的建立奠定了基础. 关键词： 掺Er光纤激光器 光学频率计量 光纤光学频率梳 光谱展宽     

透射光栅的实验标定和衍射效率的理论模拟

透射光栅广泛应用于软X射线能谱测量.为了获得用于惯性约束聚变研究的透射光栅的各级衍射效率及其他参数,在北京同步辐射源上200—1600 eV能量范围内对其进行了标定,获得了透射光栅衍射效率的实验结果.扩展了透射光栅衍射效率的计算方法,提出了7边准梯形截面衍射效率计算模型.分析拟合了实验数据,理论结果与实验结果很好符合.得到了7边准梯形的透射光栅栅线截面结构. 关键词： 透射光栅 衍射效率 实验标定 光栅模型     

具有频率噪声的单模激光线性模型随机共振

将频率有涨落的周期信号输入单模激光增益模型,计算出输出光强的相关函数及功率谱,对信噪比随噪声强度和系统参数的变化进行了研究. 结果表明:信噪比随频率噪声强度的变化、抽运噪声强度的变化、量子噪声强度的变化均出现随机共振;信噪比随增益系数和损失系数的变化也出现随机共振. 关键词： 频率噪声 功率谱 随机共振     

Observable T7 lepton flavor symmetry at the Large Hadron Collider

More often than not, models of flavor symmetry rely on the use of nonrenormalizable operators (in the guise of flavons) to accomplish the phenomenologically successful tribimaximal mixing of neutrinos. We show instead how a simple renormalizable two-parameter neutrino mass model of tribimaximal mixing can be constructed with the non-Abelian discrete symmetry T(7) and the gauging of B-L. This is also achieved without the addition of auxiliary symmetries and particles present in almost all other proposals. Most importantly, it is verifiable at the Large Hadron Collider.     

Graphite nanosheets doped with Fe, Ni, and N, synthesized in one step, and their unique magnetic performance

Graphite nanosheets (GNs) doped with N, Fe, or Ni were synthesized by pyrolysis of metal tetrapyridinoporphyrazine (MPTpz, M=Fe²⁺, and Ni²⁺) and a mixture of MPTpzs in a chemical vapor deposition furnace. The products obtained were characterized by scanning and transmission electron microscopy, and X-ray photoelectron spectroscopy. The magnetic properties of the GNs obtained were investigated at room temperature using a vibrating sample magnetometer with an applied field of −10 000-10 000 Gs. The results show the GNs obtained are terrace-like and ultra-thin, with very high aspect ratio. Fe, Ni and N atoms have been doped to the GNs successfully. There are two types of N atom that are introduced into pure carbon systems: pyrinidic and graphitic N atoms. The GNs obtained exhibit ferromagnetic behavior at room temperature. Sample S1, obtained by pyrolysis of a mixture of MPTpzs (M=Fe²⁺ and Ni²⁺), have the highest coercivity force. The saturation magnetization (M_s), remanent magnetization (M_r), and coercivity (H_c) values of sample S1 are 24.51 emu g⁻¹, 3.95 emu g⁻¹, and 207.34 Gs, respectively.     

Reconstruction for limited-projection fluorescence molecular tomography based on projected restarted conjugate gradient normal residual

Limited-projection fluorescence molecular tomography (FMT) can greatly reduce the acquisition time, which is suitable for resolving fast biology processes in vivo but suffers from severe ill-posedness because of the reconstruction using only limited projections. To overcome the severe ill-posedness, we report a reconstruction method based on the projected restarted conjugate gradient normal residual. The reconstruction results of two phantom experiments demonstrate that the proposed method is feasible for limited-projection FMT.     

Zonal slope prediction for open-loop adaptive optics

We present what we believe to be the first results that obtained with the recursive least square zonal slope predictor working on an open-loop liquid-crystal adaptive optics system operating on astronomical implementation at visible and near infrared wavelength on a 1.23 m telescope. The system produces substantially better results than a direct open-loop correction based on previous measurement. A 27% relative gain in full-width at half-maximum and 30% relative gain in Strehl ratio are obtained.     

Fabrication of fluorinated polyimide optical waveguides by micropen direct writing technology

A novel and cheap direct writing method based on the micropen has been developed to fabricate fluorinated polyimide stripe optical waveguides on Si/SiO₂ wafers. The overall design, starting material, micropen direct writing system and fabrication processes of the stripe optical waveguides are presented. The effects of the key direct writing parameters, such as the tip-to-substrate distance, extrusive gas pressure, writing speed and viscosity of the polyamic acid, on the dimension and morphology of the stripe optical waveguides are discussed in detail. After deposition by the micropen system and baking process, the fluorinated polyimide stripe optical waveguides with good morphology and surface quality can be fabricated using the optimal parameters. The propagation losses at the wavelength of 1.55 μm are in the range of 1.4-3.5 dB cm⁻¹ as characterized by different length combinations of the strip optical waveguides.