Mild and Efficient Syntheses of 1-Aryl-3,4-dihydroisoquinolines and 1-Aryl-3,4-dihydro-β-carbolines via Regiospecific β-Eliminations of the Corresponding N-Tosyl-1,2,3,4-tetrahydroisoquinolines and N-Tosyl-1,2,3,4-tetrahydro-β-carbolines

Treatment of N-tosyl-1-aryl-1,2,3,4-tetrahydro-isoquinolines or N-tosyl-1-aryl-1,2,3,4-tetrahydro-β-carbolines with a strong base such as NaOH or KOH at 70 °C in dimethylsulfoxide (DMSO) produced 1-aryl-3,4-dihydroisoquinolines or 1-aryl-3,4-dihydro-β-carbolines in good yields via mild and regiospecific β-eliminations. A dramatic solvent effect was observed, DMSO was crucial for the reactions. The temperature is also crucial for the reactions and should be kept between 60 and 80 °C.     

Thermal fluctuations and rubber elasticity

The effects of thermal elastic fluctuations in rubbery materials are examined. It is shown that, due to their interplay with the incompressibility constraint, these fluctuations qualitatively modify the large-deformation stress-strain relation, compared to that of classical rubber elasticity. To leading order, this mechanism provides a simple and generic explanation for the peak structure of Mooney-Rivlin stress-strain relation and shows good agreement with experiments. It also leads to the prediction of a phonon correlation function that depends on the external deformation.     

Synthesis and Characterization of Ag8(Ge1−x,Snx)(S6−y,Sey) Colloidal Nanocrystals

A facile colloidal approach to synthesize Ag₈(Ge_1?x,Sn_x)(S_6?y,Se_y) nanocrystals (NCs) in a highly controlled way across the entire compositional ranges (0≤x≤1, 0≤y≤6) has been developed. The NCs exhibit a uniform size distribution, highly crystalline structure, over 1 g scalable synthesis, and tunable band gaps in the range of 0.88–1.45 eV by varying their chemical compositions. The Ag₈GeS₆ NCs with a band gap of approximately 1.45 eV were employed as a model light harvester to assess their applicability in solar cells by a full solution‐processing device, yielding an efficiency of 0.28 % under AM1.5 illumination, demonstrating their application potential in solar energy utilization.     

Quantum Dots for Display Applications

This article offers a materials-chemistry perspective for colloidal quantum dots (QDs) in the field of display, including QD-enhanced liquid-crystal-display (QD-LCD) and QD-based light-emitting-diodes (QLEDs) display. The rapid successes of QDs for display in the past five years are not accidental but have a deep root in both maturity of their synthetic chemistry and their unique chemical, optical, and optoelectronic properties. This article intends to discuss the natural match of QD emitters for display and chemical means to eventually bring about their full potential.     

Stretchable Perovskite Solar Cells with Recoverable Performance

Perovskite solar cells (PSCs) are a promising photovoltaic technology for stretchable applications because of their flexible, light‐weight, and low‐cost characteristics. However, the fragility of crystals and poor crystallinity of perovskite on stretchable substrates results in performance loss. In fact, grain boundary defects are the “Achilles’ heel” of optoelectronic and mechanical stability. We incorporate a self‐healing polyurethane (s‐PU) with dynamic oxime–carbamate bonds as a scaffold into the perovskite films, which simultaneously enhances crystallinity and passivates the grain boundary of the perovskite films. The stretchable PSCs with s‐PU deliver a stabilized efficiency of 19.15 % with negligible hysteresis, which is comparable to the performance on rigid substrates. The PSCs can maintain over 90 % of their initial efficiency after 3000 hours in air because of their self‐encapsulating structure. Importantly, the self‐healing function of the s‐PU scaffold was verified in situ. The s‐PU can release mechanical stress and repair cracks at the grain boundary on multiple levels. The devices recover 88 % of their original efficiency after 1000 cycles at 20 % stretch. We believe that this ingenious growth strategy for crystalline semiconductors will facilitate development of flexible and stretchable electronics.     

多孔氧化铝模板催化制备定向碳纳米管阵列

Well-aligned open-ended multi-walled carbon nanotube (MWCNT) arrays were prepared via chemical vapor deposition (CVD) method in porous anodic aluminum oxide (AAO) templates without depositing any transition metals as catalyst. Effects of the CVD temperature and heat treatment were studied in detail.Well-aligned open-ended MWCNT arrays were obtained at the CVD temperature above 600 ℃; when CVD temperature is reduced to around 550 ℃, CNTs, CNFs and other structures existed at the same time; no CNTs or carbon nanofibres (CNFs) could be found as the CVD temperature is below 500 ℃, and only amorphous carbon in the porous AAO template was found. Experimental results showed that the AAO template is catalytic during the CVD process, and it has the following two effects: to catalyze thermal decomposition of acetylene and to catalyze conversion of carbon decomposed from acetylene into CNTs or CNFs. Heat treatment could improve the graphitization degree, but it might also introduce new defects.     

Output feedback regulation of time-delay nonlinear systems with unknown continuous output function and unknown growth rate

Nonlinear Dynamics - This paper is concerned with the global regulation via output feedback for the time-delay nonlinear systems with unknown continuous output function and unknown growth rate....     

Rotational and rovibrational transitions in the a 1Δ2 and b 1Σ+0+ states of sulfur monoxide radical

ABSTRACT

Sulfur monoxide radical has widely been detected in outer space using ground-state spectroscopy. The a ¹Δ₂ and b ¹Σ⁺₀₊ states of this radical have low excitation energies, and they possibly exist in outer space. In this work, the potential energy curves and dipole moment functions of the two states were evaluated using the complete active space self- consistent field method, followed by the valence internally contracted multireference configuration interaction approach. The transition line positions, oscillator strengths, band transition dipole matrix elements, Einstein A coefficients, and Franck–Condon factors of all transitions were calculated for lower vibrational levels at rotational angular momentum quantum number J up to 150. The transition line positions calculated in this study are in good agreement with the experimental results. The rovibrational transition became noticeably weak at Δυ > 5. Comparing the results of a ¹Δ₂ and b ¹Σ⁺₀₊ states reported in this paper with the previous values, we conclude that these results are the most accurate and complete to date.     

Heat capacity and thermodynamic properties of 1-hexadecanol

Three different nitrocellulose (NC) samples produced from linters were investigated. DSC studies on the NC+sym-diethyldiphenylurea (C1) mixtures were carried out. The influence of storage time on their pore structures was examined using thermoporometry. The results led to conclusion that large pores are multiples of small ones. The parameter n was used to characterize the number of C1 molecules equivalent to NC ring. Its value for short storage time was about 9 but for longer time reached the value of 3. The influence of thermal history on the phase transition and porosity of the different nitrocellulose samples was different.     

A New Cationic Fluorescent Probe for HSO3− Based on Bisulfite Induced Aggregation Self-Assembly

In comparison with the numerous studies that have centered on developing molecular frameworks for the functionalization of fluorescent materials, less research has addressed the influence of the side chains, despite such appendages contributing significantly to the properties and applications of fluorescent materials. In this work, a new series of cationic fluorescent probes with AIE characteristics have been developed, which exhibit unique sensitivity for charge-diffusion anions, namely HSO₃⁻, via the interactions of ions and the cooperation of the controllable hydrophobicity. The impact of the alkyl chain length attached at the cationic probes suggested that the fluorescent intensity and sensitivity of the probes could be partially enhanced by adjusting their aggregation tendency through the action of the hydrophobic effect under aqueous conditions. DLS and SEM images indicated that different particle sizes and new morphologies of the probes were formed in the anion-recognition-triggered self-assembly process, which could be attributed to the composite effect of electrostatic actions, Van der Waals forces and π-π stacking.