Determination of methylmercury fluxes across the air–water and air–soil interfaces by gas chromatography with electron capture detection

A method for the determination of methylmercury (MeHg) fluxes across the air–water and air–soil interfaces was developed using an in situ chamber. The MeHg in the air coming out of the chamber was captured by a column containing sulfhydryl cotton fiber adsorbent. MeHg was then desorbed from the column by using 2 mol L^–1 HCl. The MeHg in the effluent was extracted with benzene, and determined by gas chromatography with electron capture detection. Finally, the MeHg flux was calculated using the chamber. The method was applied to simulated experiments, and the results showed that the MeHg fluxes in the air–water system were higher than those in the air–soil–water system. The method was also successfully applied to the field measurements of an environment polluted by a chemical factory, and the results showed that the MeHg fluxes across the air–soil and air–water interfaces were 0.21–3.09 and 0.14–0.79 ng m^–2 h^–1, respectively. The method will be a useful tool in the environmental study of MeHg.     

Determination of proteins with Alizarin Red S by Rayleigh light scattering technique

A new protein determination method by enhanced Rayleigh light scattering (RLS) technique has been developed. In acid condition (pH=3.60), RLS of 1,2-dihydroxyanthraquinone-3-sulfonate (Alizarin Red S) can be greatly enhanced by addition of proteins, resulting in two characteristic peaks, 360 and 505 nm, respectively. The new protein assay is based on the RLS enhancement and spectrum change. The optimum condition for the reaction was investigated. The linear range is 0.20-24.9 μg ml⁻¹ for BSA and 0.20-15.5 μg ml⁻¹ for HSA. The detection limits (S/N=3) are 9.59 ng ml⁻¹ for BSA and 9.51 ng ml⁻¹ for HSA. The results of determination for human serum samples were comparable to those obtained by Bradford method. The binding stoichiometry was determined.     

New cytotoxic bufadienolides from the biotransformation of resibufogenin by Mucor polymorphosporus

Resibufogenin is a cytotoxic steroid isolated from the Chinese drug ChanSu. The biotransformation of resibufogenin by Mucor polymorphosporus afforded 22 products, and 15 of them were new. The transformation reactions involved hydroxylations at C-1β, C-5, C-7α, C-7β, C-12α, C-12β and C-16α, as well as epimerization or dehydrogenation of 3-OH. Hydroxylations at C-12α, C-12β and C-16α were the major reactions, each giving products in >5% yields, whereas the other products were obtained in fairly low yields. Some of the products showed decreased but still potent cytotoxicities. This investigation provided a useful approach to prepare new bufadienolides and most of them were difficult to obtain by chemical means.     

Development of a quality control method for the characterization of oligonucleotides by capillary zone electrophoresis-electrospray ionization-quadrupole time of flight-mass spectrometry

A capillary zone electrophoresis-negative electrospray ionization-quadrupole time of flight-mass spectrometric method was developed for the characterization of oligonucleotides after synthesis, using model compounds. The major difficulty is the adduction of metal cations to the polyanionic backbone of the oligonucleotide sample, resulting in complex spectra and decreased sensitivity. Several approaches were investigated to circumvent this problem. Separation was performed in an ammonium carbonate buffer. During separation, the interfering metal ions were exchanged for ammonium ions, which are less tightly bound to the oligonucleotide when ionized. The influence of the addition of piperidine and imidazole or trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid (CDTA) to the running buffer for further reduction of cation adduction was investigated. Addition of CDTA to the buffer system resulted in a deconvoluted spectrum with very little adducts. On-line sample stacking proved vital to preconcentrate the samples. The pH and the concentration of the ammonium carbonate buffer as well as the electrophoresis voltage were optimized to achieve the best signal response for the oligonucleotides and a maximum reduction of the cation adducts as well as a short analysis time. Finally, the sheath liquid composition was examined for further improvement of the signal. The developed method was used to analyze different oligonucleotides (5000-9200 Da) in light of its use as a final quality control method for oligonucleotides in terms of purity and sequence homogeneity of the synthesized products. In all cases, very little adducts were observed in the deconvoluted spectra, and the relative errors of the measured molecular masses ranged from 3 to 35 ppm.     

Synthesis and structure of a novel three-dimensional metal selenite containing multidirectional intersecting double helical chains: [Fe2(H2O)4(SeO3)2]

A novel three-dimensional metal selenite [Fe₂(H₂O)₄(SeO₃)₂] (1) has been hydrothermally synthesized and characterized by the elemental analyses, IR spectrum, TG analysis and the single crystal X-ray diffraction. Compound 1 crystallizes in the monoclinic system, space group P21/n, with a=6.5283(13) Å, b=8.8754(18) Å, c=7.6798(15) Å, (=98.82(3)β, V=439.71(15) Å3, and Z=2. Compounds 1 exhibits interesting three-dimensional structure constructed from {FeO₆} octahedra and {SeO₃} pyramids linked via the corner- and/or edge-sharing mode. The most interesting structural feature of compound 1 is that the existence of multidirectional intersecting double helical chains in one compound.     

LapRLSR for NIR spectral modeling and its application to online monitoring of the column separation of Salvianolate

A novel near infrared (NIR) modeling method—Laplacian regularized least squares regression (LapRLSR) was presented, which can take the advantage of many unlabeled spectra to promote the prediction performance of the model even if there are only few calibration samples. Using LapRLSR modeling, NIR spectral analysis was applied to the online monitoring of the concentration of salvia acid B in the column separation of Salvianolate. The results demonstrated that LapRLSR outperformed partial least squares (PLS) significantly, and NIR online analysis was applicable.     

Speckle characteristics of simulated deep Fresnel region under shadowing effect

After the three-dimensional self-affine fractal random surface simulation, we use the optical scattering theory to calculate the deep Fresnel region speckle(DFRS) under consideration of the more strict shadowing effect. The evolution of DFRS with the scattering distance and the intensity probability distribution are studied. It is found that the morphology of the scatterer has an antisymmetric relationship with the intensity distribution of DFRS, and the effect of micro-lenses on the scattering surface causes the intensity probability distribution of DFRS to deviate from the Gaussian speckle in the high light intensity area.     

激光扫描技术在靶场测试中的应用研究

为了解决光电类仪器在武器射击准确度和射击密集度的测试中遇到天空背景亮度不够,或弹丸口径小,弹道偏高而无法测试的问题,利用旋转棱镜使激光束在空中扫描,照亮弹丸表面,从而大大降低对光电传感器灵敏度的要求,使得该项测试工作不受天空背景条件的影响,并提高测试精度.     

非晶氧化钛薄膜形成过程中钛离子能量对表面结构影响的机理

研究了非晶氧化钛薄膜沉积过程中入射钛离子能量对表面结构形成机理以及薄膜特性的影响.模拟结果表明,通过提高入射钛离子能量,可以有效降低成膜表面粗糙度,从而减小薄膜表面的光学散射损耗.研究发现,当入射离子能量提高后,薄膜生长模式从"岛"状生长过渡到了"层"状生长,且离子入射点附近的平均扩散系数也有显著增加,这有利于形成更加平整的高质量薄膜表面.     

恒流电晕充电对聚四氟乙烯多孔薄膜驻极体驻极态的影响

利用常温下恒流和恒压电晕充电、充电后的等温表面电位衰减、热刺激放电和扫描电镜等实 验手段研究了恒流和恒压电晕充电技术对聚四氟乙烯多孔薄膜驻极体驻极态的影响.与恒压电晕充电相比较，恒流电晕充电时由于流过薄膜的电流恒定，增加了注入电荷在多孔结构厚度方向界面处的俘获概率，使沉积电荷密度上升，改善了驻极体的储电能力.然而，这些位于不同层深多孔界面处的俘获电荷在这类功能膜储存或使用过程中，经外激发从脱阱位置 以跳动（hopping）模式输运至背电极的路径相对缩短将导致脱阱电荷衰减较快. 关键词： 恒流电晕充电 聚四氟乙烯多孔膜 驻极体 电荷稳定性