Oxidative coupling of methane over Na-Mn-W/SiO2 catalyst at higher pressure

Na-Mn-W/SiO₂ catalysts were prepared and their catalytic performance for oxidative coupling of methane (OCM) was evaluated in a stainless-steel microreactor at elevated pressure. The results show that a CH₄ conversion of 15.1% with a C₂₊ selectivity of 71.8% was obtained under 750^oC, 1.0×10⁵h^-1 GHSV, CH₄/O₂ ratio of 8 and 1.0 MPa. Moreover, 17.3% CH₄ conversion with 51.6% C₂ selectivity and 23.6% C₃-C₄ selectivity was obtained under 750^oC, 2.0×10⁵h^-1 GHSV, CH₄/O₂ ratio of 8 and 1.0 MPa.     

Metrological role of neutron activation analysis. IB. Inherent characteristics of relative INAA as a primary ratio method of measurement

This is the second part of a paper which deals with the advantages and disadvantages of relative instrumental neutron activation analysis concerning traceability and uncertainty, and the current scope and possible future extensions of neutron activation analysis as a primary ratio method. The first part of this paper has been published in this Journal [1]. Received: 19 March 2001 Accepted: 2 October 2001     

Oligonucleotide Analogues with Integrated Bases and Backbone. Part 14

The self‐complementary tetrameric propargyl triols 8, 14, 18 , and 21 were synthesized to investigate the duplex formation of self‐complementary, ethynylene‐linked UUAA, AAUU, UAUA, and AUAU analogues with integrated bases and backbone (ONIBs). The linear synthesis is based on repetitive Sonogashira couplings and C‐desilylations (34–72% yield), starting from the monomeric propargyl alcohols 9 and 15 and the iodinated nucleosides 3, 7, 11 , and 13 . Strongly persistent intramolecular H‐bonds from the propargylic OH groups to N(3) of the adenosine units prevent the gg‐type orientation of the ethynyl groups at C(5′). As such, an orientation is required for the formation of cyclic duplexes, this H‐bond prevents the formation of duplexes connected by all four base pairs. However, the central units of the UAUA and AAUU analogues 18 and 14 associate in CDCl₃/(D₆)DMSO 10 : 1 to form a cyclic duplex characterized by reverse Hoogsteen base pairing. The UUAA tetramer 8 forms a cyclic UU homoduplex, while the AUAU tetramer 21 forms only linear associates. Duplex formation of the O‐silylated UUAA and AAUU tetramers is no longer prevented. The self‐complementary UUAA tetramer 22 forms Watson–Crick‐ and Hoogsteen‐type base‐paired cyclic duplexes more readily than the sequence‐isomeric AAUU tetramer 23 , further illustrating the sequence selectivity of duplex formation.     

Preparation and characterization of C16 monolithic columns for capillary electrochromatography

A series of methacrylamide-based C16 monolithic columns were prepared and characterized to determine how their porous structural properties and chromatographic behavior are affected by the percentages of functional monomer, base monomer, and cross-linker in the polymerization solution. Baseline separation of 6 neutral compounds can be readily obtained in an optimized column. Furthermore, the effects of organic additive in the mobile phase, operating voltages, and temperature on retention behaviors and separation efficiencies were also studied. The separation mechanism is also discussed. High column efficiency and good reproducibility indicate that the monolithic columns hold considerable promise.     

Diffusion characteristics of a T-type microchannel with different configurations and inlet angles.

A series of symmetrical and asymmetrical microfluidic T-sensors with different inlet angles were fabricated to study the mixing characteristics of a T-type microstructure for generating concentration gradient. Computational fluid dynamics (CFD) simulations showed that the concentration gradient, transition zone and diffusion length were different for various configurations and inlet angles. Quick mix and sharp concentration gradient occurred in the asymmetrical structure with large inlet angle. The observed concentration gradients in the fabricated microchannel were consistent with the theoretical prediction. In this microstructure, stagnant zone and z-direction diffusion also affected the concentration gradient. Based on the simulation results, the microfluidic structure was optimized to generate desired concentration gradient for a cell-based study.     

The recent progress of wide bandgap donor polymers towards non-fullerene organic solar cells

The recent progress of wide bandgap (WBG) donor polymers for non-fullerene polymer solar cells (NF-PSCs) were reviewed in detail, which was classified by D-type and D-A type molecular backbones to discuss the related structure-property correlations and put forward an outlook for future innovations.     

1‐Acetyl‐3′‐(4‐bromophenyl)‐3′‐chlorospiro[3H‐indole‐3,2′‐oxetan]‐2(1H)‐one

In the title compound, C₁₈H₁₃BrClNO₃, the heterocyclic ring of the indole is distorted from planarity towards an envelope conformation. The orientations of the indole, oxetane, chloro and bromo­phenyl substituents are conditioned by the sp³ states of the spiro‐junction and the Cl‐attached C atoms.     

Two-photon laser spectroscopy of the muonium 1S–2S transition

The 1² S _1/2(F=1)?2² S _1/2(F=1) energy interval in muonium has been investigated by Doppler-free two-photon laser spectroscopy. The transition was observed by uniquely identifying and counting the muons released after the photoionization of the 2S state by the same laser field. The measured transition frequency of 2455 528016(58)(43) MHz is in good agreement with QED calculations. The experiment can be interpreted as a test of the Lamb shift contributions at the 1% level. The method is also well suited for a precise determination of the mass of the positive muon in a muoniumhydrogen isotope shift measurement.     

铜离子交换改性的沸石催化剂上甲烷的非氧芳构化

已有研究表明，ＭｏＯ３／ＨＺＳＭ５是甲烷非氧芳构化的优良催化剂，在９７３Ｋ下甲烷转化率达６％～８％，苯选择性高于８０％，这为非氧气氛下甲烷的芳构化反应展示了非常诱人的前景［１～１２］．但是，该催化剂的活性和稳定性尚有待进一步提高，目前已有使用Ｐｔ，...     

溶出伏安法同时测定水中痕量铀和镍

本文报道了同时测定钴和镍的一种方法.在 0.01mol/L NH_3·H_2O-0.01mol/LNH_4Cl-3.0×10~(-5)mol/L安息香缩氨基硫脲(BTSC)溶液中,钴(Ⅱ)和镍(Ⅱ)均产生非常灵敏的还原波,其峰电位分别是:-0.94和-0.75V(vs.SCE),峰电流与钴和镍的浓度分别在2.0×10~(-8)~1.0×10~(-6)和1.0×10~(-8)~8.0×10~(-7)mol/L范围内成直线关系,该方法用于测定水中痕量钴和镍,相对标准偏差分别为1.4~2.0%和2.1~2.5%,回收率分别在98.0%~101.8%和97.9%~102.1%之间.