Temperature and injection current dependent electroluminescence study of GaInP/AlGaInP quantum well laser diode grown using tertiarybutylarsine and tertiarybutylphosphine

GaInP/AlGaInP triple quantum well (TQW) lasers, grown by metalorganic chemical vapor deposition (MOCVD) using tertiarybutylarsine (TBAs) and tertiarybutylphosphine (TBP), were fabricated with a pulsed anodic oxidation (PAO) process. The devices worked at room temperature (RT) with the lowest threshold current density (J_th) of 1.5 kA/cm² ever reported for GaInP/AlGaInP lasers grown using TBAs and TBP. Temperature dependent (35–250 K) electroluminescence (EL) study of the GaInP/AlGaInP laser diode showed almost the same luminescence quenching behavior at a high temperature region (120–250 K), independent of the injection current (100–150 mA). A model involving a nonradiative recombination mechanism was presented to interpret the EL quenching behavior over the experimental temperature range. The nonradiative recombination centers in the Al-containing barrier or cladding layer are believed to contribute to the loss of carriers via nonradiative recombination. PACS 78.60.Fi; 71.20.Nr; 78.67.De; 81.15.Gh; 42.55.Px     

Two-dimensional poroelastic acoustical foam shape design for absorption coefficient maximization by topology optimization method

Optimal shape design of a two-dimensional poroelastic acoustical foam is formulated as a topology optimization problem. For a poroelastic acoustical system consisting of an air region and a poroelastic foam region, two different physical regions are continuously changed in an iterative design process. To automatically account for the moving interfaces between two regions, we propose a new unified model to analyze the whole poroelastic acoustical foam system with one set of governing equations; Biot's equations are modified with a material property interpolation from a topology optimization method. With the unified analysis model, we carry out two-dimensional optimal shape design of a poroelastic acoustical foam by a gradient-based topology optimization setting. The specific objective is the maximization of the absorption coefficient in low and middle ranges of frequencies with different amounts of a poroelastic material. The performances of the obtained shapes are compared with those of well-known wedge shapes, and the improvement of absorption is physically interpreted.     

Magnetic behavior of MnAs precipitates in Ga1−xMnxAs diluted magnetic semiconductor

Ferromagnetic Ga_1−xMn_xAs layers (where x≈4.7–5.5%) were grown on (1 0 0) GaAs substrates by molecular beam epitaxy. These p-type (Ga,Mn)As films were revealed to have a ferromagnetic structure and ferromagnetism is observed up to a Curie temperature of 318 K, which is ascribed to the presence of MnAs secondary magnetic phases within the film. It is highly likely that the phase segregation occurs due to the high Mn cell temperature around 890–920 °C, as it is well established that GaMnAs is unstable at such a high temperature. The MnAs precipitate in the samples with x≈4.7–5.5% has a Curie temperature T_c≈318 K, which was characterized from field-cooled and zero-field-cooled magnetization curves.     

Polyvinyl alcohol-borate hydrogel containing Prussian blue for surface decontamination

A polyvinyl alcohol (PVA)-borate hydrogel-based strippable surface decontaminant containing an ammonium salt and Prussian blue (PB) was developed for the removal of ¹³⁷Cs from various surfaces. This surface decontaminant can be easily prepared by the simple mixing of commercially available materials, such as PVA, borax, NH₄Cl and PB, in water, and the decontaminant can be peeled off surfaces due to its high elastic property after surface decontamination. The hydrogel displayed an effective removal performance for Cs from painted cement, aluminum, stainless steel, and cement surfaces and a potential for reusability. Therefore, the PB/PVA-borate hydrogel has good potential as a new surface decontaminant.     

Comparative studies of bioactive organosulphur compounds and antioxidant activities in garlic (Allium sativum L.), elephant garlic (Allium ampeloprasum L.) and onion (Allium cepa L.)

We evaluated organosulphur compounds in Allium vegetables, including garlic, elephant garlic and onion, using high-performance liquid chromatography. Among organosulphur compounds, elephant garlic had considerable γ-glutamyl peptides, and garlic had the highest alliin content. Onion had low level of organosulphur compounds than did elephant garlic and garlic. In addition, antioxidant capacities were evaluated by oxygen radical absorbance capacity (ORAC) values and 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2′-azinobis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) radical scavenging assay. The results showed that garlic had the highest antioxidant capacity, followed by elephant garlic and onion. Furthermore, a positive correlation was observed between antioxidant activities and organosulphur compounds (R > 0.77). Therefore, our results indicate that there was a close relationship between antioxidant capacity and organosulphur compounds in Allium vegetables.     

Distance versus Capillary Flow Dynamics-Based Detection Methods on a Microfluidic Paper-Based Analytical Device (μPAD)

In recent years, there has been high interest in paper-based microfluidic sensors or microfluidic paper-based analytical devices (μPADs) towards low-cost, portable, and easy-to-use sensing for chemical and biological targets. μPAD allows spontaneous liquid flow without any external or internal pumping, as well as an innate filtration capability. Although both optical (colorimetric and fluorescent) and electrochemical detection have been demonstrated on μPADs, several limitations still remain, such as the need for additional equipment, vulnerability to ambient lighting perturbation, and inferior sensitivity. Herein, alternative detection methods on μPADs are reviewed to resolve these issues, including relatively well studied distance-based measurements and the newer capillary flow dynamics-based method. Detection principles, assay performance, strengths, and weaknesses are explained for these methods, along with their potential future applications towards point-of-care medical diagnostics and other field-based applications.     

Molecular Encapsulation of Trimeric Chromium Carboxylate Clusters in Metal–Organic Frameworks and Propylene Sorption

Oxo-bridged trimeric chromium acetate clusters [Cr₃O(OOCCH₃)₆(H₂O)₃]NO₃ have been encapsulated for the first time in the mesoporous cages of the chromium terephthalate MIL-101(Cr). The isolated clusters in MIL-101(Cr) have increased affinity towards propylene compared to propane, due to generation of a new kind of pocket-based propylene-binding site, as supported by DFT calculations.     

Self‐emulsion polymerization of amphiphilic monomers—a green route to synthesis of polymeric nanoscaffolds

Self‐emulsion polymerization (SEP), a green route developed by us for the polymerization of amphiphilic monomers, does not require any emulsifier or an organic solvent except that the water‐soluble initiators such as 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl)propane]dihydrochloride (VA‐044) and potassium persulfate (KPS) are only used. We report here the polymer nanoscaffolds from a number of amphiphilic monomers, which can be used for in situ encapsulation of a variety of nanoparticles. As a demonstration of the efficacy of these nanoscaffolds, the synthesis of a biocompatible hybrid nanoparticle (nanohybrid), prepared by encapsulating Fe₃O₄ magnetic nanoparticle (Fe₃O₄ MNPs) in poly(2‐hydroxyethyl methacrylate) in water, for MRI application is presented. The nanohybrid prepared following the SEP in the form of an emulsion does not involve the use of any stabilizing agent, crosslinker, polymeric emulsifier, or surfactant. This water‐soluble, spherical, and stable nanohybrid containing Fe₃O₄ MNPs of average size 10 ± 2 nm has a zeta potential value of ?41.89 mV under physiological conditions. Magnetic measurement confirmed that the nanohybrid shows typical magnetic behavior having a saturation magnetization (Ms) value of 32.3 emu/g and a transverse relaxivity (r2) value of 29.97 mM^?1 s^?1, which signifies that it can be used as a T2 contrast agent in MRI. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

Exfoliation of 2D Materials for Energy and Environmental Applications

The fascinating properties of single-layer graphene isolated by mechanical exfoliation have inspired extensive research efforts toward two-dimensional (2D) materials. Layered compounds serve as precursors for atomically thin 2D materials (briefly, 2D nanomaterials) owing to their strong intraplane chemical bonding but weak interplane van der Waals interactions. There are newly emerging 2D materials beyond graphene, and it is becoming increasingly important to develop cost-effective, scalable methods for producing 2D nanomaterials with controlled microstructures and properties. The variety of developed synthetic techniques can be categorized into two classes: bottom-up and top-down approaches. Of top-down approaches, the exfoliation of bulk 2D materials into single or few layers is the most common. This review highlights chemical and physical exfoliation methods that allow for the production of 2D nanomaterials in large quantities. In addition, remarkable examples of utilizing exfoliated 2D nanomaterials in energy and environmental applications are introduced.