Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006     

Effect of glass bead packing on the fibrillation of liquid‐crystalline polymer in polycarbonate

Polycarbonate (PC) was melt blended with small amount of liquid‐crystalline polymer (LCP) and various contents of glass beads (GB) having different diameters. The rheological measurements indicated that the GB addition increased the viscosity ratio and seemed unfavorable to the LCP fibrillation. However, the morphological observation showed that the LCP fibrillation was promoted by the GB addition and varied with the GB packing. With the increased GB packing by increasing the GB content and/or decreasing the GB diameter, LCP deformed from spheres and ellipsoids into stretched ellipsoids at lower shear rates and into long fibrils at higher shear rates. Although higher content of smaller GB jammed into the larger LCP droplets and inhibited the LCP fibrillation, very long LCP fibrils formed at higher shear rates at a high enough packing of GB. The relationship between GB packing and LCP fibrillation revealed two kinds of hydrodynamic effects of GB promoting the LCP fibrillation: at lower GB packing, the shear flow was enhanced by the high local shear between GB, in quantity; and for a high enough GB packing, the shear flow was changed, in quality, into elongational flow, which was more effective for the LCP fibrillation. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1020–1030, 2006     

仲态电子偶素湮没辐射能量的改进测量

用充氧气的气凝硅胶作仲态电子偶素源,用¹⁹²Ir精密γ能量作标准,以时间选择能谱仪和滑动比较法改进测量仲态电子偶素2γ湮没能量,得到hv=510995.34±0.69eV.经电子偶素结合能修正,得正、负电子对静止质量,与电子质量比较,表明正、负电子质量在1.4ppm内一致.     

测试温度对nc-Si∶H膜光致发光特性的影响

利用常规等离子体化学气相沉积（ＰＥＣＶＤ）工艺制备了ｎｃ－Ｓｉ∶Ｈ膜，并对其光致发光（ＰＬ）特性从１０～２５０Ｋ温度范围内进行了变温测量．实验结果指出，随着测试温度升高，ＰＬ峰值能量发生了５４ｍｅＶ的红移，ＰＬ强度在Ｔ＞８０Ｋ后呈指数下降趋势．ＰＬ峰值能量的红移起因于带隙的收缩，而ＰＬ强度的减弱则是由于非辐射复合起了主导作用．     

Interaction of gravitational waves with a superconducting cylindrical antenna

In this paper we investigate the effects of gravitational waves (GW) on a superconducting cylindrical antenna (S-antenna). We suggest that the electric fields induced by GW of dimensionless amplitudeh - 10^–24 in the interior of existing cylindrical antenna might be detectable.     

后处理温度对ZrO2气凝胶超细粉织构和结构的影响

运用神效儿宝治疗小儿厌食症２１０例，总有效率为９５．２％，显效率为６２．４％。该药使用、携带方便、见效快，疗效短，无毒副作用。实验证明，该药能显著提高胃蛋白酶含量，减慢肠管推进性运动，提高动物耐疲劳、耐缺氧能力，提高巨噬细胞吞噬率及血清补Ｃ３含量，且无毒副。作用     

高压下C60晶体玻璃化行为的理论研究

通过构造C_(60)分子间的相互作用，研究了在不同压力下C_(60)晶体中的取向有序结构．利用计算出来的两个取向之间的能量差和相隔势驿，研究了热平衡时取向占有几率和玻璃化转变温度的压力相关性．结果与实验符合．     

REDUCTION OF C=C DOUBLE BOND WITH BOROHYDRIDE EXCHANGE RESIN-TRANSITION METAL COMPOUND SYSTEMS

Borohydride exchange resin-transition metal(Co,Ni,Cu,)compoundsystems reduced C=C double to C-C single bond in ethanol.     

一种甲醇直接气相羰基化新催化剂

本世纪７０年代Ｍｏｎｓａｎｔｏ公司成功开发了甲醇液相羰化ＲｈＩ催化体系，使甲醇羰化生产醋酸成为重要的工业过程．然而，由于此工艺产物与催化剂分离复杂、铑资源紧缺以及体系中还必须加大量的碘甲烷（或氢碘酸）作促进剂，设备腐蚀严重．８０年代以来，甲醇气相羰...