二维表面浮雕结构的矢量衍射分析

利用等效介质理论,通过严格的耦合波理论计算和分析了二维表面浮雕结构的反射效率与各种因素的关系,给出了不同情况下的变化曲线;同时计算出了该结构在正入射情况下的等效折射率系数。明确提出：不管是对称的还是非对称的二维表面浮雕结构,方位角和极化角的变化对其反射率的影响都不明显;从而得出二维表了雕结构可以实现消偏振、减反的特性。分析了该结构的带宽限制,给出了在给定结构下受限的带宽;同时对浮雕高度加工误差对反射率的影响作了分析,对实际工作有一定的指导意义。     

Effects of Organic Acids on the Release of Fruity Esters in Water: An Insight at the Molecular Level

It is well known that organic acids (OAs) could affect the flavour of fruit juices and beverages. However, the molecular mechanism of aroma release is still unclear. In this study, the effects of citric acid (CA), L-(-)-malic acid (MA) and L-lactic acid (LA) on the release of six selected esters and their sensory perception were investigated by means of HS-GC-MS analyses and odour detection threshold determination, respectively. Meanwhile, the density functional theory (DFT) calculation was employed to explore the interaction modes between esters and OAs. HS-GC-MS analyses showed that the concentration and the type of OAs regulated the release of esters. The results were basically consistent with the detection threshold change of those esters. The DFT calculation suggested that the main intermolecular interaction was hydrogen bonds, and several esters could form a ternary ring structure with OAs through hydrogen bonds. The interactions can induce the different release behaviours of esters in OAs water solution. The number of carboxyl functional groups in OAs and the spatial conformation of esters appeared to influence the magnitude of the interaction. The above results demonstrated the mechanism of OAs affecting the release of esters and indicated a possible flavour control way by using different OAs and OA concentrations.     

激光超声位移场的共焦法布里-佩罗干涉仪检测技术

一般共焦法布里-佩罗(Fabry-Perot,FP)干涉仪只能检测声场的法向位移分量,而声场的切向位移分量含有法向位移分量所不能表达的材料特性。本文在检测声场法向位移分量共焦FP干涉仪的基础上,自行研制了一新颖的双通道共焦F-P干涉仪,它同时检测来自试样表面+θ和-θ角上的散射光,通过对两路输出信号作简单的信号处理,可以得到试样表面的位移点。用该F-P干涉仪测量了脉冲激光在Ti膜上激发的Lamb波的法向和切向位移,结果与理论预计一致。     

Superhydrophobic Flexible Supercapacitors Formed by Integrating Hydrogel with Functional Carbon Nanomaterials

Main observation and conclusion With the rapid development of the wearable electronics,the flexible supercapacitor with high energy density has attracted more a...     

高温吸热管内超临界CO2传热特性的数值模拟

研究超临界CO2在高温吸热管内的传热特性是将其应用于聚光太阳能热发电技术中的基础.本文对此进行了数值模拟研究,分析了流体温度、流动方向、系统压力、质量流率和热流密度对对流传热系数和Nu数的影响.结果表明:高温区(800—1050 K)的对流传热系数和Nu数受流动方向和系统压力的影响均很小,但都随着质量流率的增大以及热流...     

微腔内气体抽离的多尺度模拟与分析

基于适用于整个克努森数范围的流动理论,建立了去除惯性约束聚变实验中靶丸内空气的理论模型,并设计实验验证了此模型的可靠性。物理实验要求靶丸内空气浓度低于10×10⁻⁶,数值模拟了去除靶丸内空气的过程,重点分析了靶丸内空气浓度、压力与除气时间的关系。计算并比较了单管路一次抽气法、单管路循环抽气法与双管路流洗法三种去除靶丸内空气方法的时间成本。数值计算结果表明：单管路一次抽气法中,靶丸上的微通道的存在对去除靶丸内空气所需时间的影响不可忽略,在考虑靶丸上微通道与充气管的情况下,需要1961.77 h才能使靶丸内的空气浓度达到标准。单管路循环抽气法中,抽气次数与单次抽气程度会影响去除靶丸内空气所需总时间,在单次抽气程度值取最优的情况下,采用充三次,抽四次的方案可使达标总时间减少至1 h左右,此方案下单次充气和抽气时间分别为6 min和10 min。而采用双管路流洗法则仅需11 min便可使靶丸内空气浓度达标。     

A proposal for preparation of cluster states with linear optics

Measurement-based quantum computation in an optical setup shows great promise towards the implementation oflarge-scale quantum computation. The difficulty of measurement-based quantum computation lies in the preparation ofcluster state. In this paper, we propose the method of generating the large-scale cluster state, which is a platform formeasurement-based quantum computation. In order to achieve more complex quantum circuits, the preparation protocolof N-photon cluster state will be proposed as a generalization of the preparation of four- and five-photon cluster states.Furthermore, our proposal is experimentally feasible.     

钼、硼浸种对大豆幼苗生理特性的影响

以浙春3号大豆为研究材料，设置了不同的钼、硼浸种对大豆种子的萌发和幼苗生理特性的影响，结果表明：低浓度钼或硼有利于大豆种子的萌发，钼、硼浸种时间以12h最佳，钼浸种或不过量硼浸种将增大豆幼苗的呼吸速率，提高过氧化物酶（POD）、过氧化氢酶（CAT）和超氧化岐化酶（SOD）等抗逆性酶的活性，降低质膜透性（MP）及丙二醛（MDA）和脯氨酸（Pro)的含量，中等浓度的钼、硼浸种效果最显著，而高浓度浸种将产生相反的效果。     

Power dissipation characteristics of great power and super high speed semiconductor switch

The power dissipation characteristics of pulsed power switch reversely switched dynistors （RSDs） are investigated in this paper. According to the expressions of voltage on RSD, derived from the plasma bipolar drift model and the RLC circuit equations of RSD main loop, the simulation waveforms of current and voltage on RSD are acquired through iterative calculation by using the fourth order Runge-Kutta method, then the curve of transient power on RSD versus time is obtained. The result shows that the total dissipation on RSD is trivial compared with the pulse discharge energy and the commutation dissipation can be nearly ignored compared with the quasi-static dissipation. These characteristics can make the repetitive frequency of RSD increase largely. The experimental results prove the validity of simulation calculations. The influence factors on power dissipation are discussed. The power dissipation increases with the increase of the peak current and the n-base width and with the decrease of n-base doping concentration. In order to keep a low power dissipation, it is suggested that the n-base width should be smaller than 320μm when doping concentration is 1.0×10^14cm^-3 while the doping concentration should be higher than 5.8×10^13cm^-3 when n-base width is 270μm.     

Hierarchical nanostructured composite cathode with carbon nanotubes as conductive scaffold for lithium-sulfur batteries

Carbon nanotubes (CNTs) are excellent scaffolds for advanced electrode materials, resulting from their intrinsic sp2 carbon hybridization, interconnected electron pathway, large aspect ratio, hierarchical porous structures, and low cost at a large-scale production. How to make full utilization of the mass produced CNTs as building blocks for nanocomposite electrodes is not well understood yet. Herein, a composite cathode containing commercial agglomerated multi-walled CNTs and S for Li-S battery was fabricated by a facile melt-diffusion strategy. The hierarchical CNT@S coaxial nanocables exhibited a discharging capacity of 1020 and 740 mAh g-1 at 0.5 and 2.0 C, respectively. A rapid capacity decay of 0.7% per cycle at the initial 10 cycles and a slow decay rate of 0.14% per cycle for the later 140 cycles were detected. Such hierarchical agglomerated CNT@S cathodes show advantages in easy fabrication, environmentally benign, low cost, excellent scalability, and good Li ion storage performance, which are extraordinary composites for high performance Li-S battery.