电泳法制备的致密氧化锡薄膜及其在高稳定性钙钛矿太阳能电池中的应用

在平面型钙钛矿太阳能电池中常采用SnO₂作为电子传输层材料,相应的SnO₂薄膜常采用溶液旋涂法制备。但是由于前驱液中的纳米颗粒可能会发生部分团聚、基底和溶液难以完全避免灰尘等杂质颗粒混入,且最佳的SnO₂电子传输层的厚度通常仅有约20 nm,所以这种方法制备的电子传输层难以保证严格致密和无纳米针孔。在本工作中,我们报道了一种电泳沉积制备致密SnO₂薄膜的方法,并用其有效地提高了钙钛矿太阳能电池的光电转换效率和工况稳定性。通过电泳法,表面带负电荷的SnO₂纳米颗粒在电场的作用下沉积到氧化铟锡(ITO)阳极表面,这种方法得到的薄膜比旋涂法制备的更为致密。将其应用于n-i-p结构的钙钛矿太阳能电池中,能够使得暗电流降低并抑制载流子的非辐射复合,从而提高电池的短路电流和开路电压,进而实现更高的光电转换效率(从18.17%提高到19.52%),且能消除迟滞效应。更重要的是,长期工况稳定性测试表明基于电泳-旋涂法制备的器件在1个太阳的光照下、最大功率点处连续工作960 h后,仍然能够保持71%的初始效率;然而基于旋涂法制备的器件在工作100 h后即降低到初始效率的70%。本工作提供了一种全新的SnO₂电子传输层的制备方法,显著地提高了器件性能和工况稳定性,后续有望应用于制备大面积器件和电池模组。     

Non-Lithography Hydrodynamic Printing of Micro/Nanostructures on Curved Surfaces

A key issue of micro/nano devices is how to integrate micro/nanostructures with specified chemical components onto various curved surfaces. Hydrodynamic printing of micro/nanostructures on three-dimensional curved surfaces is achieved with a strategy that combines template-induced hydrodynamic printing and self-assembly of nanoparticles (NPs). Non-lithography flexible wall-shaped templates are replicated with microscale features by dicing a trench-shaped silicon wafer. Arising from the capillary pumped function between the template and curved substrates, NPs in the colloidal suspension self-assemble into close-packed micro/nanostructures without a gravity effect. Theoretical analysis with the lattice Boltzmann model reveals the fundamental principles of the hydrodynamic assembly process. Spiral linear structures achieved by two kinds of fluorescent NPs show non-interfering photoluminescence properties, while the waveguide and photoluminescence are confirmed in 3D curved space. The printed multiconstituent micro/nanostructures with single-NP resolution may serve as a general platform for optoelectronics beyond flat surfaces.     

化学还原法制备多形貌银纳米材料

银纳米材料因具有导热导电性能好、光电性能优良及抗菌能力强等优点而引起广泛关注,近年来其制备方法得到广泛研究。已报道的制备方法可分为化学法、物理法和生物法等,其中化学还原法可以通过使用不同的还原剂、包裹试剂及助剂,实现不同形貌及粒径的银纳米材料的快速制备。本文综述了化学还原法制备颗粒状、线形、片状、立方体及其它形貌的银纳米材料的原理及应用,并展望了银纳米材料工业化制备及应用研究的发展趋势。可控制备多形貌银纳米材料对于电子行业、医药生物以及传感器等相关领域的发展具有重要意义。     

Superhydrophobic surface based on micro/nano structured ZnO nanosheets for high-efficiency anticorrosion

Journal of Solid State Electrochemistry - There are two key factors in the fabrication of superhydrophobic surfaces. One is to have the appropriate micro/nano structure, and the other is to reduce...     

两种红光铱配合物的合成和电致发光性能研究

以二(二苯基磷酰)胺(Htpip)作为辅助配体,与主配体2-(2,4-二氟苯基)异喹啉和2-(4-三氟甲基苯基)异喹啉合成了红光铱磷光配合物Ir(dfpiq)2tpip和Ir(tfmpiq)2tpip并得到了晶体结构。在CH2Cl2中发射光谱主要是MLCT发射,峰位置分别为622和600 nm,量子效率分别为15%和17%,而HOMO/LUMO能级分别是-4.80/-2.58和-4.73/-2.57 eV。在1150~1300(V·cm-1)1/2电场范围,Ir(dfpiq)2tpip的电子迁移率为6.61~8.49×10-6cm2·V-1·s-1,Ir(tfmpiq)2tpip的电子迁移率为6.08~6.61×10-6cm2·V-1·s-1。ITO/TAPC(60 nm)/Ir-complex(15wt%):CBP(50 nm)/TPBi(60 nm)/LiF(1 nm)/Al(100 nm)中基于Ir(dfpiq)2tpip的器件最大安培效率和功率效率分别为4.71 cd·A-1和1.82 lm·W-1,12.0 V时达到的最大亮度为18 195 cd·m-2。基于Ir(tfmpiq)2tpip的器件最大安培效率和功率效率分别为3.47 cd·A-1和1.51 lm·W-1,12.4 V时达到的最大亮度为14 676 cd·m-2。     

改性炭黑-LaMnO3复合材料的制备及其共价复合效应对氧还原性能的影响

以VulcanXC-72炭黑为载体,通过对炭载体石墨化处理和表面化学修饰,将其与化学沉淀法制备的纳米级LaMnO₃颗粒共混,再经特定温度下煅烧,制备出改性炭黑-LaMnO₃复合材料.X射线光电子能谱和热重分析表明,当煅烧温度在300℃时,炭载体与LaMnO₃纳米颗粒之间形成了大量C-O-M（M=La,Mn）化学键.扫描电子显微镜和高分辨透射电子显微镜分析发现,纯相LaMnO₃纳米颗粒主要呈现短棒、三支棒或竹节棒的形貌特征,炭载体则为具有完整石墨层的空心球结构,LaMnO₃均匀分散在炭载体上.在25℃,1mol/LNaOH溶液中的电化学测试结果表明,成分比（LaMnO₃：C）为2：3的复合材料具有很高的氧还原电催化活性,氧还原反应电子数为3.81,中间产物H₂O₂产率为9.5%,其活性接近商业Pt/C催化剂（E-TEK）.高的氧还原电催化活性主要归因于LaMnO₃纳米颗粒与炭载体之间形成了大量共价键.     

多金属氧酸盐催化的水氧化研究进展

氢气以其清洁无污染、燃烧值高等优点成为未来最具潜力的可再生能源之一,而清洁生产氢气的最佳选择之一即为裂解水. 利用太阳能模拟光合作用实现水的全分解产生氢气和氧气是目前最为理想的能源转化方式,并且已经引起了众多研究者的关注. 水分解的半反应之一--水氧化反应由于其过程复杂,一直是制约水分解的瓶颈. 所以寻找高效、稳定的水氧化催化剂便成为了突破该瓶颈的关键. 多金属氧酸盐是一类以前过渡金属氧簇为基本单元形成的多金属氧簇化合物. 由于多金属氧酸盐在物理、化学性质方面具有无法比拟的特性,使得其在催化、药物、纳米科技和材料科学等方面已被广泛地应用. 多金属氧酸盐的全无机配体可很好地抵御水氧化反应的强氧化性环境,故将其作为水氧化催化剂越来越引起研究者们的注意,并且已有多种多金属氧酸盐被设计为水氧化催化剂. 本文详细介绍了各种不同过渡金属取代的多金属氧酸盐水氧化催化剂的研究进展.     

A hierarchical porous carbon membrane from polyacrylonitrile/polyvinylpyrrolidone blending membranes:Preparation,characterization and electrochemical capacitive performance

Novel hierarchical porous carbon membranes were fabricated through a simple carbonization procedure of well-defined blending polymer membrane precursors containing the source of carbon polyacrylonitrile （PAN） and an additive of polyvinylpyrrolidone （PVP）, which was prepared using phase inversion method. The as-fabricated materials were further used as the active electrode materials for supercapacitors. The effects of PVP concentration in the casting solution on structure feature and electrochemical capacitive performance of the as-prepared carbon membranes were also studied in detail. As the electrode material for supercapacitor, a high specific capacitance of 278.0 F/g could be attained at a current of 5 mA/cm2 and about 92.90% capacity retention could be maintained after 2000 charge/discharge cycles in 2 mol/L KOH solution with a PVP concentration of 0.3 wt% in the casting solution. The facile hierarchical pore structure preparation method and the good electrochemical capacitive performance make the prepared carbon membrane particularly promising for use in supercapacitor.     

微纳电极阵列检测丘脑底核电刺激引起的纹状体神经元活动变化

丘脑底核(STN)深部脑刺激(DBS)已成为帕金森病的重要外科治疗手段,然而其确切的作用机理尚不明确.本研究采用微机电系统(MEMS)技术制备了一种16通道植入式微电极阵列(MEA),在MEA表面修饰了铂黑-还原氧化石墨烯-Nafion膜(Pt/RGO/Nafion)纳米材料,用于同步检测麻醉大鼠脑内纹状体神经元在STN电刺激前后多巴胺(DA)含量和动作电位(Spike)发放变化.STN-DBS结果表明,电刺激20 s后,DA含量开始升高,最高达1.72 μmol/L,较高浓度状态保持约50 s后回落至正常水平.与此同时, 检测到在DA上升阶段中间神经元Spike发放活动增强,在保持高于DA正常浓度水平阶段,中等多棘神经元(MSNs)放电频率增加.本研究制备的微电极阵列传感器能够实现脑内多巴胺和电生理的原位实时检测,有望成为神经信息检测的有力工具.     

Effect of organic acid chain length on foam performance in a porous medium

We have systematically studied the effect of organic acid chain length on surface dilatational properties and foam flow performance in a porous medium. Surface dilatational properties were studied by oscillating drop module (ODM). ODM results in deionized water show that sufficient long chain length of organic acid is an essential requirement for high surface dilatational modulus. While, to various salinities, surfactant to acid ratio of achieving high surface dilatational modulus varies. Foam flow tests show that surface dilatational modulus has decisive effect on produced foam size, which partially determines foam flow pressure drop. Both surface dilatational modulus and surface tension determine foam flow pressure drop. Besides, surface loss modulus also contributes to pressure drop. Bulk foam tests show that addition of organic acids with proper chain length can enhance foam tolerance to oil significantly. Compared with alkane chain length, acid with longer chain has good ability in stabilizing foam. At last, foam flooding tests show that surface dilatational modulus and foam tolerance to oil play important roles in foam enhanced oil recovery.