Rapid Synthesis of Lead Oxide Nanorods by One-step Solid-state Chemical Reaction at Room Temperature

A simple and facile method was reported to synthesize lead oxide nanorods. Nanorods of lead oxide were obtained directly from grinding solid metal salt and sodium hydroxide in agate mortar with the assistance of a suitable nonionic surfactant in only one step, which is different from the result of hydroxide in solution. The product has been characterized by XRD, TEM and SEM. The formation mechanism of rod-like morphology is discussed and the surfactant plays an important soft-template role in modifying the interface of solid-state reaction and according process of rod-formation.     

The Weak Interaction on CO2 …CO van der Waals Complex : A Theoretical Study

The geometries of van der Waals complex CO2…CO were optimized at DFT and second-order Moller-Plesset perturbation(MP2) levels with the large basis set,three stable structures were found.The most stable structure has a T-shape geometry in which the CO lies along the C2 axis of CO2,with the two C atoms direct contact and R(C…C)=0.3227nm.The corresponding energies of the most stable structure were calculated by means of MP2,MP4D,MP4DQ,MP4SDTQ,MP4SDQ,CCSD and CCSD(T) methods,The BSSE (basis set superposition error) wads eliminated by the Boys-Bernardi counterpoise correction(CP) method.According to thermodynamics data.van der Waals complex CO2…CO can found at a low temperature and or a high pressure,There is a little charge transferred between the two interacted subunits.In the most stable structure,CO2 is the acceptor and CO is the donor.     

3-氟-6-碘吡嗪-2-羧酸甲酯的合成及晶体结构

以3-氨基吡嗪-2-羧酸为原料，经酯化反应、亲电反应和重氮化反应合成了3-氟-6-碘吡嗪-2-羧酸甲酯（1），总收率62.34%，其结构经¹H NMR、¹³C NMR和MS确证，用X-单晶衍射法测定了化合物的晶体结构。结果表明：1（CCDC: 1986368）属单斜晶系，空间群C2/c，晶胞参数a=17.6566(5) Å, b=4.74850(10) Å，c=19.6368(6) Å，β=95.6540(10)°，V=1638.39(8) ų，Z=8，R_gt(F)=0.0173，wR_ref(F²)=0.0465，F(000)=1056，μ=3.885 mm^-1。      

Coating Carbon Nanotubes with Europium Oxide

Carbon nanotubes (CNTS) coating with europium oxide by a simple method is reported in this letter for the first time. The CNTS were refluxed in a solution of nitric acid containing europium nitrate, and the pH value was subsequently ajusted with ammonia solution. At last, the mixture was filtered and annealed. The TEM micrograph showed that the CNTS were covered with a uniform thin layer with thickness of about 15 nm. The XRD results revealed that the CNTS were coated with europium oxide.     

SYNTHESIS OF ORGANOGERMANE OLIGOMERS VIA LIGAND SUBSTITUTION POLYMERIZATION FROM 1, 4-DIOXANE COMPLEX OF GERMANIUM DICHLORIDE

Some organogermanium oligomers with different side groups were synthesized via li-gand substitution polymerization from 1, 4-dioxane complex of germanium dichloride withdifferent organolithitum compounds. The oligomers were isolated through either precipi-tation from methanol or extraction using toluene with a yield of no less than 50%. Theweiglit average molecular weight (M_w) of the oligomers is ranging from 1.4×10~3 to 5.9×10~3depending on the type and alkyl length of the organolithium compounds used.     

丙酮中除虫脲溶液标准物质研制

采用重量-容量法制备丙酮中除虫脲溶液标准物质。准确称量国家二级标准物质除虫脲溶解到色谱纯丙酮中,通过A级容量瓶定容至500 mL,摇匀后分装到2 mL安瓿瓶内共460瓶,每瓶为1 mL,保持低温迅速封口,配制过程中室温保持在(20±2)℃。采用液相色谱法进行均匀性、稳定性检验和定值结果验证。从样品中随机抽取16瓶进行均匀性检验,经F检验表明,在95%的置信区间范围内该标准物质均匀性良好;采用t检验对标准物质稳定性进行检验,标准物质在12月内稳定性良好。对该标准物质的不确定度进行了评定,研制的丙酮中除虫脲溶液标准物质定值结果为100μg/mL,相对扩展不确定度为2%(k=2)。结果表明,该标准物质均匀性与稳定性良好,量值准确,可用于日常分析检测中的方法评价和仪器校准。     

线型碳链LiC_(2n)Li的结构和电子光谱的密度泛函理论研究

应用密度泛函理论,在B3LYP/6 31G(d)水平上优化得到了线型簇合物LiC2nLi(n=1 ~10,D∞h)的基态平衡几何构型,并计算了它们的谐振动频率.利用含时密度泛函理论,计算了簇合物LiC2nLi的X1∑ +g→11∑ +u跃迁的垂直激发能,以及相应的振子强度.基于计算结果,建立了跃迁能和体系大小n的解析关系式. 同时也计算了体系的第一绝热电离能,讨论了体系的电离能与体系大小n的关系.     

两种含锌化合物对慢性染铅大鼠海马NADPH-d阳性神经元影响的比较

为探讨硫酸锌(ZnSO4)和牛磺酸锌(TZC)拮抗铅对学习记忆的损害的不同，采用NADPH-黄递酶(NADPH-d)组化，观察了饮用含0.2g／L醋酸铅(PbAc)饮水和含不同剂量(5．0，15．0g／kg)ZnSO4、(5．9、17．7g／kg)TZC饲料喂养的大鼠海马一氧化氮合酶(NOS)活性的变化。结果表明，各补锌组均不同程度地缓解铅致NOS活力减低，铅 低TZC组、铅 高ZnSO4组和铅 低ZnSO4组大鼠海马神经元的NOS活性明显高于染铅组，其中铅 低TZC组的保护作用最显著，而铅 高TZC组的NOS活性明显低于对照组，而接近染铅组水平。结论是锌对抗铅的毒性作用与锌的化学结合形式、锌的剂量密切相关。     

含金属纳米粒子的层层自组装及单壁碳纳米管的催化生长

利用层间的静电吸附作用，重氮树脂和不同种类的含金属纳米粒子被依次吸附到硅片表面形成层层自组装膜。通过改变自组装膜的层数可以控制纳米粒子在表面吸附的量，同时利用重氮树脂的光敏特性可以实现纳米粒子在表面的图案化排布。以这些纳米粒子为催化剂，研究了单壁碳纳米管在硅片表面的化学气相沉积生长。     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.