Evaluation of the performance of a soft X-ray charger for the bipolar charging of nanoparticles

The use of soft X-rays in a neutrahzer represents an alternative technique that could replace conventional radioactive sources.In this study,we evaluated the charging characteristics of a soft X-ray aerosol neutralize!.In addition,the results from the evaluation of the soft X-ray charger were compared with results obtained using a neutralizer incorporating an ²⁴¹Am radioactive source.The tandem differential mobility analyzer technique was used previously to determine the size-dependent positive,negative,and neutral charge fractions of a soft X-ray neutralizer.This technique was used to show that the neutral fractions obtained using the soft X-ray charger agreed well with the predictions of bipolar diffusion charging theory,and that the soft X-ray charger could be used as a neutralizer for a scanning mobility particle sizer system.     

Simulation of two‐phase flow–body interaction problems using direct forcing/fictitious domain–level set method

In the present paper, a direct forcing/fictitious domain (DF/FD)–level set method is proposed to simulate the twophase flow–body interaction. The DF/FD does not sacrifice accuracy and robustness by employing a discrete δ (Dirac delta) function to transfer quantities between the Eulerian nodes and Lagrangian points explicitly as the immersed boundary method. The advantages of this approach are the simple concept, the easy implementation and the utilization of original governing equation without modification. The main idea is to combine DF/FD method with the level set method in the Cartesian coordinates. We present the results of a number of test cases to illustrate the effectiveness of the proposed method for single‐phase flow–body interaction problem and the two‐phase flows with a stationary body. Eventually, the simulations of various water entry problems have been conducted to validate the capability and the accuracy of the present method on solving the twophase flow–body interaction. Consequently, the present results are found to be in good agreement with those of previous studies. Copyright © 2013 John Wiley & Sons, Ltd.     

Local duality theorem for q-ary 1-perfect codes

In this paper, we derive the relationship between local weight enumerator of q-ary 1-perfect code in a face and that in the orthogonal face. As an application of our result, we compute the local weight enumerators of a shortened, doubly-shortened, and triply-shortened q-ary 1-perfect code.     

An Itô Formula of Generalized Functionals and Local Time for Fractional Brownian Sheet

Abstract

By using the white noise theory for a fractional Brownian sheet, we derive an Itô formula for the generalized functionals for the fractional Brownian sheet with arbitrary Hurst parameters H ₁, H ₂ ∈ (0,1). As an application, we give the integral representations for two versions of local times of a fractional Brownian sheet, respectively.     

Optimisation of a hybrid photoneutron source in a linear accelerator using GEANT4 and MCNPX Monte Carlo codes

The \(\alpha \) decay half-lives of hyper and normal isotopes of Po nuclei are studied in the present work. The inclusion of \(\Lambda \)–N interaction changes the half-life for \(\alpha \) decay. The theoretical predictions on the \(\alpha \) decay half-lives of normal Po isotopes are compared with experimental results and are seen to be matching well with each other. The neutron shell closure at \(N = 126\) is found to be the same for both normal and hypernuclei. The Geiger–Nuttal (G–N) law for \(\alpha \) decay is unaltered in the case of hypernuclei. The hypernuclei will decay into normal nuclei by mesonic or non-mesonic decay modes. Since the half-lives of normal Po nuclei are well within the experimental limits, our theoretical results suggest experimental verification of the \(\alpha \) emission from hyper Po nuclei in a cascade process.     

Removal of nanoparticles on silicon wafer using a self-channeled plasma filament

The effective removal of nanoparticles from a silicon wafer surface was demonstrated using the self-channeled plasma filament excited by a femtosecond (130?fs) Ti:sapphire laser (?? _p=790?nm). The photoinduced self-channeled plasma filament in air reached a length of approximately 110?C130?mm from the first focal spot with diameters ranging from 40 to 50???m at input intensities of more than 1.0×10¹⁴?W/cm². By the scan of wafer using the X?CY?CZ stage during self-channeled plasma filament, the removal variation of nanoparticles on surface was observed in situ before and after the plasma filament occurred. The cleaning efficiency was strongly dependent on the gap distance between the plasma filament and the surface. The removal efficiency of nanoparticles reached 96?% with no damage to the surface when the gap was 150???m.     

Multiferroic characteristics of the strained epitaxial Bi0.9Ho0.1FeO3 thin film

We fabricated high quality epitaxial Bi_0.9Ho_0.1FeO₃ thin films which exhibited the tetragonally stained structure with a c/a ratio of about 1.04. The Bi_0.9Ho_0.1FeO₃ thin film showed a good ferroelectric property with the high remanent polarization (P_r) of about 80 μC/cm². The ferromagnetic hysteresis loop with a clear remanent magnetization was shown. The coercive field and the remanent magnetization of the Bi_0.9Ho_0.1FeO₃ film are 6200 Oe and 1.7 emu/g, respectively. The abrupt conduction due to space charge limited (SCL) was revealed in leakage current density versus electric field.     

Supercapacitive electrochemical performance of graphene-containing carbon aerogel prepared using polyethyleneimine-modified graphene oxide

Graphene-containing carbon aerogel was prepared by a sol–gel polymerization of resorcinol-formaldehyde (RF) method using polyethyleneimine (PEI)-modified chemically exfoliated grapheme oxide, and its electrochemical performance as an electrode for supercapacitor was examined. The effect of PEI in the preparation of RFGO (resorcinol-formaldehyde and graphene oxide) solution on the physicochemical and electrochemical properties of graphene-containing carbon aerogel (CAPG) was investigated. For comparison, graphene-containing carbon aerogel was prepared using PEI-free graphene oxide (CAG). Graphene-free carbon aerogel (CA) was also prepared. CAPG showed the highest BET surface area (792 m²/g) and the largest pore volume (1.64 cm³/g) with well-developed porous structure. Various electrochemical measurements revealed that CAPG showed high specific capacitance (205 F/g), low equivalent series resistance (0.55 Ω), and superior capacitive behavior. The PEI-modified graphene oxide played an important role in enhancing physicochemical properties and supercapacitive electrochemical performance of CAPG.