Flow-induced ordering of particles and flow velocity profile transition in a tube flow of graphene oxide dispersions

We measured the S- and P-order parameters of flow-induced ordered graphene oxide (GO) particles and the flow velocity profiles for a flowing aqueous GO dispersion in a tube, by using an optical method. The order parameters clearly exhibit increasing concentric biaxial ordering as the flow velocity increases, with the exception of a disordered centre. Newtonian to non-Newtonian transition in the flow velocity profile is found, changing from a parabolic shape to a fuller shape at very low Reynolds numbers less than 10. This is attributed to the shear thinning effect (i.e., an ordering-induced reduction in viscosity). In the Newtonian flow, a uniaxial ordering was dominant; whereas a biaxial ordering sharply increased in the non-Newtonian flow, indicating that both the ordering of GO particles and the interparticle interactions influence the flow profile transition.     

Orientational ordering in the nematic phase of 4-alkyl-4'-cyanobicyclohexanes

The orientational ordering of three liquid crystals (trans,trans-4-n-alkyl-4'-cyanobicyclohexanes) has been investigated using ¹³C NMR. 2D proton-encoded local field spectroscopy was used to determine the ¹³C-¹H dipolar coupling constants, from which the order parameters were calculated. Semi-empirical linear relations between the obtained order parameters and anisotropic ¹³C chemical shifts were established. It was found that the order parameters of the major axis of the cyclohexane rings are smaller than those of liquid crystals with phenyl rings, and the order parameters of the C-H bonds in the aliphatic chains also behave differently.     

Effect of electron donor-acceptor interaction on the thermal stability of supramolecular side chain liquid crystalline polymers based on poly(3-carboxypropylmethylsiloxane)

Supramolecular side chain liquid crystalline polymers were prepared from poly(3-carboxypropylmethylsiloxane) (PSI100) and azobenzene-based derivatives through intermolecular hydrogen bonding between the carboxylic acid groups of PSI100 and the imidazole rings in the azobenzene-based derivatives. The presence of H-bonding was confirmed using FTIR spectroscopy. The polymeric complexes behave as liquid crystalline polymers and exhibit nematic mesophases identified on the basis of the observation of Schlieren textures. The mesogenic behaviour of these complexes was studied by polarizing optical microscopy and X-ray diffraction. The thermal behaviour of the complexes was investigated by differential scanning calorimetry. On increasing the spacer length, the transition temperatures initially increase. A further increase in spacer length, however, leads to a decrease in the transition temperatures. The electron donor-acceptor interaction between unlike mesogenic units in supramolecular copolymeric complexes helps to stabilize the mesophase.     

Preparation of macroporous polyHIPE foams via radiation-induced polymerization at room temperature

PolyHIPEs are highly porous, crosslinked polymer foams typically synthesized within high internal-phase emulsions (HIPEs). Two kinds of polyHIPEs including poly(styrene-divinylbenzene) [P(St-DVB)] and poly(methyl methacrylate-divinylbenzene) [P(MMA-DVB)] foams are synthesized in this work, which are fabricated from HIPEs template via radiation-induced polymerization at room temperature. Traditional free radical polymerization initiated by potassium peroxydisulfate (KPS) at 60 °C for producing polyHIPE P(St-DVB) foams is also conducted for comparison. It is found that the amount of emulsifier can be reduced greatly in the radiation-induced polymerization of HIPEs at room temperature, compared with the traditional polymerization approach. Besides, P(MMA-DVB) PolyHIPE foams with a fine microstructure of highly interconnected pores have been successfully fabricated via radiation-induced polymerization in this work, which is usually difficult to be prepared by thermal-initiation method because of the intermediate hydrophobicity of methyl methacrylate monomer. The influences of the fraction of internal aqueous phase and the concentration of emulsifier on the structure and performance of foams are carefully explored. The structure and compression strength of the foams are characterized by scanning electron microscopy and a mechanical testing machine, respectively.

A pre-enrichment procedure using diethyldithiocarbamate-modified TiO2 nanoparticles for the analysis of biological and natural water samples by ICP-AES

In this article, a new method that utilizes a diethyldithiocarbamate-modified nanometre TiO₂ (TiO₂–DDTC) as solid-phase extractant has been developed for simultaneous preconcentration of trace Cu(II), Pb(II), Zn(II), and Cd(II) prior to measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). The separation/preconcentration conditions of analytes, which include the effects of pH, sample flow rate and volume, elution conditions, and interfering ions on the recovery of the analytes, were investigated. At pH 5, the adsorption capacity of modified nanometre TiO₂–DDTC was found to be 6.2, 19, 4.7, and 6.0?mg/g for Cu(II), Pb(II), Zn(II), and Cd(II), respectively. According to the definition of IUPAC, the detection limits (3σ) of this method for Cu(II), Pb(II), Zn(II), and Cd(II) were 0.41, 1.7, 0.39, and 0.52?ng/mL, respectively. The proposed method achieved satisfied results when applied to the determinations of trace Cu(II), Pb(II), Zn(II), and Cd(II) in biological and natural water samples.     

Facile synthesis of gemini surface-active ATRP initiator and its use in soap-free AGET ATRP mini-emulsion polymerisation

A novel cationic gemini surfactant has been readily synthesised in 70 % total yield. The functional gemini surfactant can act both as an emulsifier and an atom transfer radical polymerisation (ATRP) initiator in mini-emulsion polymerisation of methyl methacrylate (MMA), in which no other emulsifier was required. 1-(Dimethylamino)dodecane (N,N-dimethyldodecylamine, DMDA) was found to be a good ligand in the activator generated by electron transfer (AGET) ATRP reaction. Kinetic studies indicated that the polymerisation featured controlled/living radical polymerisation.     

硫醇类配体修饰金纳米粒子在嵌段共聚物中自组装的研究进展

本文综述了不同类型硫醇配体修饰金纳米粒子的合成方法以及功能性金纳米粒子在嵌段共聚物薄膜中的自组装研究进展,重点介绍了硫醇类配体修饰金纳米粒子的合成方法,包括Brust合成法、原位合成法、grafting from合成法、配体置换法、单晶模板法等。总结了硫醇基小分子或聚合物配体修饰的金纳米粒子与嵌段共聚物之间自组装的调控方法,如利用配体与嵌段共聚物组分的隔离作用、配体与嵌段共聚物组分形成的氢键作用、溶剂蒸气退火或热退火等诱导嵌段共聚物/纳米粒子复合薄膜自组装。展望了功能性金纳米粒子以及嵌段共聚物/金纳米复合材料的发展方向。     

Highly selective determination of rhodium(III) using silica gel surface-imprinted solid-phase extraction

A novel Rh(III)-imprinted amino-functionalised silica gel sorbent was prepared by a surface imprinting technique for preconcentration and separation of Rh(III) prior to its determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Compared with the traditional solid sorbents and non-imprinted polymer particles, the ion-imprinted polymers (IIPs) had higher adsorption capacity and selectivity for Rh(III). The maximum static adsorption capacity of the imprinted and non-imprinted sorbent for Rh(III) was 29.86?mg?g^?1 and 11.23?mg?g^?1, respectively. The imprinted Rh(III) was removed with 2?mL of 3% thiourea?+?2?mol?L^?1 HCl. The obtained imprinted particles exhibited excellent selectivity and rapid kinetics process for Rh(III). The relatively selective factor (α_r) values of Rh(III)/Ru(III), Rh(III)/Au(III), Rh(III)/Pt(IV), Rh(III)/Ir(IV), Rh(III)/Pd(II) were 26.7, 39.0 29.2, 28.1, 43.7, respectively, which were greater than 1. The detection limit (3σ) of the method was 0.26?µg?L^?1. The relative standard deviation of the method was 1.79% for eight replicate determination of 10?µg of Rh³⁺ in 200?mL water sample. The method was validated by analysing standard reference material (GBW 07293), the results obtained is in good agreement with standard values. The developed method was also successfully applied to the determination of trace rhodium(III) in geological samples with satisfactory results.     

Enhancement inhibition efficiency of PBTCA depending on the inclusion complex with hydroxypropyl-β-cyclodextrin

For the first time, hydroxypropyl-β-cyclodextrin (HP-β-CD) has been brought in to include 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTCA) in order to enhance inhibition efficiency of PBTCA, which leads a new approach to study oil–gas field corrosion inhibition in the process of acid treatment. Based on the host–guest inclusion reaction, the inclusion complex of PBTCA with HP-β-CD has been prepared in the laboratory. UV–Vis absorption spectrum was applied to study the inclusion behavior of PBTCA with HP-β-CD. The results revealed that PBTCA with HP-β-CD can form a 1:1 stoichiometry inclusion complex. The 1:1 inclusion complex synthesized by using lyophilization was further characterized by Fourier transform infrared spectroscopy. Besides, inhibition effect of the inclusion complex on the corrosion inhibition of Q235 carbon steel has been investigated in 0.1 M sulfuric acid (H₂SO₄) solution using potentiodynamic polarization, electrochemical impedance spectroscopy techniques and scanning electron microscopy (SEM). It was found that the presence of the inclusion complex better achieved the anti-corrosion property in aggressive medium than was the case with alone PBTCA and the highest inhibition efficiency of the inclusion complex over 90 % was obtained, which are suggestive of the active effect of the inclusion complex for improving inhibition efficiency of PBTCA. Meanwhile, the results obtained from SEM further showed that the inclusion complex acts as a more efficient corrosion inhibitor for Q235 carbon steel in H₂SO₄ medium.     

A novel synthetic method for preparation of some folates

An improved method was developed for preparation of 5,6,7,8-tetrahydrofolic acid (THF) and calcium-5-methyltetrahydrofolate (5-MTHF-Ca) by reduction of folic acid using KBH₄ catalyzed by Pb(NO₃)₂. The yields of THF and 5-MTHF-Ca were 56.5 and 42.7 %, respectively. A convenient method for measurement of THF and 5-MTHF-Ca using liquid chromatography–mass spectrometry (LC–MS) was also established, enabling analysis of those folates within 10 min without application of gradient elution.