Laser spectroscopy of the 1s HFS of H-like ions at a bunched beam in the storage ring ESR

The investigation of the 1s HFS provides a good possibility for testing QED effects in a combination of a strong electric and magnetic field. Here, we report about the laserspectroscopic measurements of the ground state hyperfine splitting in ²⁰⁷Pb⁸¹⁺. To handle this M1-transition in the infrared optical regime with its long lifetime, we developed a new detection technique using a bunched ion beam. For the observation of fluorescence light, a new mirror system is adapted to the emission characteristics from an ion beam at relativistic velocities. This revised version was published online in July 2006 with corrections to the Cover Date.     

YBa2Cu1-xCox(Cu1-yZny)2Oz体系的Co,Zn共同掺杂效应

本文报道通过对YBa₂Cu_1-xCo_x(Cu_1-yZn_y)₂O_z(0≤x,y≤0.1)体系晶体结构、氧含量、正常态电阻-温度关系、Hall效应以及超导临界温度等的综合测量,发现随着Co和Zn含量的增加,体系经历了从正交结构的超导金属向四方结构的非超导半导体的转变,超导临界温度T_c和载流子浓度n_h均迅速下降,Co 关键词：     

Interactions between the components in isotactic polypropylene blended with EPDM

The interaction of isotactic polypropylene with ethylene propylene diene terpolymer in their blends has been investigated by use of differential scanning calorimetry, dynamic mechanical analysis, wide- and small-angle x-ray scattering, and by investigating the nucleation and kinetics of crystallization of the iPP component under the polarization microscope. It is found, that the dispersion of the EPDM component in the iPP matrix is dependent on blend composition and is maximal at 10% EPDM content. An interface layer between the two components is formed by migration of iPP molecules into the EPDM phase. A model for this interface is proposed.     

Substrates for flexible magnetic recording media: The role of base films for modern performance requirements

The trend in magnetic recording media is towards higher frequencies and larger storage capacities. Base film technology has developed in a manner analogous to corresponding demands on particulate and thin-film media, i.e. in the direction to reduced thickness, smoother surfaces, and very high uniformity. Key elements for the success of polyester films as substrates for all kinds of flexible media are new concepts for pigmentation and surface design. Future digital video recording systems and thin-film media will require new substrates with higher mechanical strength and thermal stability. Trends in base film development including dual-surface films and alternative polymer substrates are discussed.     

钙钛矿型Sr_（1－x）Bi_xFeO_（3－y）系列物的结构、电性及铁氧化态研究

在１１００℃制备了钙钛矿型非计量系列物Ｓｒ_（１－ｘ）Ｂｉ_ｘＦｅＯ_（３－ｙ），与文献相比，明显具有温度低、时间短、能耗少的特点。用化学分析方法测得其化学式及Ｆｅ离子的平均价态，用ＸＲＤ、交流阻抗、ＩＲ、Ｍｏｓｓｂａｕｅｒ谱等方法研究了其结构与性质，该类化合物具有Ｐｍ３ｍ对称性和半导体性质，铁离子会产生电荷歧化现象。     

A STRASSEN LAW OF THE ITERATED LOGARITHM FOR PROCESSES WITH INDEPENDENT INCREMENT

ＡＳＴＲＡＳＳＥＮＬＡＷＯＦＴＨＥＩＴＥＲＡＴＥＤＬＯＧＡＲＩＴＨＭＦＯＲＰＲＯＣＥＳＳＥＳＷＩＴＨＩＮＤＥＰＥＮＤＥＮＴＩＮＣＲＥＭＥＮＴＷａｎｇＪｉａｇａｎｇＡｂｓｔｒａｃｔＬｅｔＸ＝｛Ｘ（ｔ），ｔ０｝ｂｅａｐｒｏｃｅｓｗｉｔｈｉｎｄｅｐ...     

Alloying by high dose ion implantation of iron into magnesium and aluminium

Alloys of the systems Fe–Al (mixable over the whole concentration range) and Fe–Mg (insoluble with each other) were produced by implantation of Fe ions into Al and Mg, respectively. The implantation energy was 200 keV and the ion doses ranged from 1 × 10₁₄ to 9 × 10₁₇cm^-2The obtained implantation profiles were determined by Auger electron spectroscopy depth profiling. Maximum iron concentrations reached were up to 60 at.% for implantation into Al and 94 at.% for implantation into Mg. Phase analysis of the implanted layers was performed by conversion electron Mössbauer spectroscopy and X‐ray diffraction. For implantation into Mg, two different kinds of Mössbauer spectra were obtained: at low doses paramagnetic doublets indicating at least two different iron sites and at high doses a dominant ferromagnetic six‐line‐pattern with a small paramagnetic fraction. The X‐ray diffraction pattern concluded that in the latter case a dilated αiron lattice is formed. For implantation into Al, the Mössbauer spectra were doublet structures very similar to those obtained at amorphous Fe–Al alloys produced by rapid quenching methods. They also indicated at least two different main iron environments. For the highest implanted sample a ferromagnetic six‐line‐pattern with magnetic field values close to those of Fe₃Al appeared.