由季戊四醇合成季戊四硫醇的新方法

以季戊四醇为原料,先合成四对甲苯磺酸季戊四醇酯,然后四对甲苯磺酸季戊四醇酯与硫氰酸钾在N,N-二甲基甲酰胺中加热反应,生成了2,3,7,8-四硫螺[4,4]壬烷,2,3,7,8-四硫螺[4,4]壬烷经四氢化铝锂还原、酸化,得到季戊四硫醇.产物结构经熔点、红外光谱、质子核磁共振谱、拉曼光谱鉴定.     

Effect of Bi promoter on the performances of selective oxidation of isobutane to methacrolein over MoVO/AlPO4 catalysts

The effects of Bi on the catalytic performance of selective oxidation of isobutane to methacrolein over MoVO/AlPO4 catalyst were investigated by XRD, FT-Raman, XPS, UV-vis DRS techniques. The results show that the addition of Bi component into the MoVO/AlPO4 catalyst obviously improves the catalytic performance, and the selectivity to methacrolein can increase from 14.2% to 45.1% with the increase of Bi/V molar ratio from 0 to 1. Combining the characterization results with the reaction evaluation, it is concluded that the catalytic activities of the MoV0.3Bix/AlPO4 catalysts are related to the crystalline phase composition and the dispersion of molybdenum and vanadium oxides species in general, and also to the V5+/V4+ molar ratio on the surface in particular.     

混合总体基尼系数的下限——兼论我国城乡合在一起时基尼系数的计算

本文研究基尼系数的估计问题.国家统计局每年发布的统计年鉴包含城镇和农村个人收入的分组数据,但分点不相同并且未公布.这些情况对于估计整个社会的基尼系数带来挑战.本文对于两个总体按照一定比例混合后的新总体,针对来自原来两个总体的分组数据,给出了新总体的基尼系数的下限.并将所得的结果用于计算我国城乡合在一起时基尼系数的下限值.这些结果容易推广到更多总体混合情形,也可以应用到其它实际情况的基尼系数的估计,比如国家或地区的联合体.     

A novel hexairon cluster with one disulfide and two Ph2PCS3− ligands

The title compound, hexadecacarbonylbis{μ₃‐[(diphenylphosphanyl)methanediidyl]sulfanido}‐μ₄‐disulfido(2−)‐hexairon(4 Fe—Fe), [Fe₆(C₁₃H₁₀PS)₂(S₂)(CO)₁₆], contains two inversion‐related [Fe₃(Ph₂PCS)(CO)₈] subclusters linked by an equatorial disulfide bond [S—S = 2.1490 (9) Å]. Each Ph₂PCS³⁻ ligand is coordinated to a triiron core in a μ₃‐κP:κ²C:κ²S fashion.     

Notable shift of ultraviolet intensity on Sn-doped ZnO nanostructure fabricated by sol–gel method

Sn-doped ZnO (SZO) thin films are deposited by sol–gel dip-coating method with Sn content at 0 at.% and 1–15 at.% with an increment of 2 at.%. The structure and luminescence of the films are investigated. X-ray diffraction results indicate that all the SZO samples show preferential orientation along the (002) direction, and the scanning electron microscope exhibits that the surface morphology of the films change from nanoparticles to nanorods with increasing Sn concentration. X-ray photoelectron spectroscopy reveals that Sn exists as valence of +4 in the matrix. The photoluminescence peaks at 381 and 398 nm are observed in all the samples. The ratio of intensity of peak at 381 nm to that of peak at 398 nm differed markedly. The intensity of peak at 398 nm might be due to the response for the Sn atoms, while the intensity of peak at 381 nm is probably related to the quantum size effect.     

Ligand effect in the synthesis of hyperbranched polymers via copper-catalyzed azide-alkyne cycloaddition polymerization (CuAACP)

Copper-catalyzed azide-alkyne cycloaddition polymerization (CuAACP) of AB₂ monomers demonstrated a chain-growth mechanism without any external ligand because of the complexation of in situ formed triazole groups with Cu catalysts. In this study, we explored the use of various ligands that affected the polymerization kinetics to tune the polymers’ molecular weights and the degree of branching (DB). Eight ligands were studied, including polyethylene glycol monomethyl ether (PEG₃₅₀, M_n = 350), tris(benzyltriazolylmethyl)amine (TBTA), 2,6-bis(1-undecyl-1H-benzo[d]imidazol-2-yl)pyridine (Py(DBim)₂), 2,2′-bipyridyl (bpy), 4,4′-di-n-nonyl-2,2′-bipyridine (dNbpy), N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA), N,N,N′,N″,N″-penta(n-butyl)diethylenetriamine (PBuDETA), and N,N,N′,N″,N″-pentabenzyldiethylenetriamine (PBnDETA). All ligands except PEG₃₅₀ exhibited stronger coordination with Cu(I) than the polytriazole polymer, which freed the Cu catalyst from polymers and resulted in dominant step-growth polymerization with simultaneous chain-growth feature. Meanwhile, the use of PEG₃₅₀ ligand retained the confined Cu in the polymer, demonstrating a chain-growth mechanism, but lower polymer molecular weights as compared with the no-external-ligand polymerization. Results indicated that aliphatic substituent groups on ligands had little effect on the molecular weights and DB of the polymers, but rigid aromatic substituent groups decreased both values. By varying the ligand species and amounts, hyperbranched polymers with DB value ranging from 0.53 ([TBTA]₀/[Cu]₀ = 5) to 0.98 ([PMDETA]₀/[Cu]₀ = 2) have been achieved. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2238–2244     

Determination of hydroxysafflor yellow A in biological fluids of patients with traumatic brain injury by UPLC‐ESI‐MS/MS after injection of Xuebijing

A simple, novel, specific, rapid and reproducible ultra‐performance liquid chromatography electrospray ionization tandem mass spectrometry method has been developed and validated for the determination of hydroxysafflor yellow A (HSYA) in biological fluids (plasma, urine and cerebrospinal fluid) of patients with traumatic brain injury after intravenous injection of Xuebijing (XBJ). Liquid–liquid extraction was performed, and separation was carried out on an Acquity UPLC? BEH C₁₈ column, with gradient elution using a mobile phase composed of methanol and 0.1% formic acid at a flow rate of 0.3 mL/min. A triple quadrupole tandem mass spectrometer with electrospray ionization was used for the detection of HSYA. The mass transition followed was m/z 611.0 → 491. The retention time was less than 3.0 min. The calibration curve was linear in the concentration range from 2 to 6125 ng/mL for cerebrospinal fluid, plasma and urine. The intra‐ and inter‐day precisions were <10%, and the relative standard deviation of recovery was <15% for HSYA in biological matrices. The method was successfully applied for the first time to quantify HSYA in the biological fluids (especially in cerebrospinal fluid) of patients with traumatic brain injury following intravenous administration of XBJ. Copyright © 2014 John Wiley & Sons, Ltd.     

Experimental Study of Liquid Hydrocarbons Pyrolysis to Acetylene in H2/Ar Plasma

Liquid hydrocarbons including n-hexane, cyclohexane and toluene are pyrolyzed in H₂/Ar plasma to investigate the effects of feedstock properties and key operating conditions (e.g., the feedstock specific input power and residence time) on the reaction performance. The experiments verify that the non-aromatic hydrocarbons show better chemical reactivity than partially aromatic substances. Meanwhile, the straight-chain alkanes and cycloalkanes have better yields of ethylene during the pyrolysis. The results also demonstrate that the pyrolysis reactions are almost completed within the first 0.8?ms in Ar/H₂ plasma independent of the feed substances (i.e., liquid hydrocarbons), where the increased feedstock specific input power enhances the reactant conversions and correspondingly raises the yields of acetylene. At a feedstock specific input power of 4.7?×?10⁴?kJ/kg, the n-hexane conversion is over 90?% and the yield of acetylene reaches 70?%. In addition, when using n-hexane as the feedstock, very little coke is formed during the course of reaction. Comprehensive comparisons of the current experiments with the data reported in the literature are made to point out the key influencing factors, i.e., the effective mass ratio of C/H (R _C/H) in the gaseous phase and the quench temperature. Both two factors would need to be enhanced in order to get a better performance. Finally, the improvements on the specific energy requirement of this process are discussed.     

Film-forming characteristics and thermal stability of low viscosity benzoxazines derived from melamine

A novel class of low-viscosity benzoxazines has been synthesized from melamine and formaldehyde with phenol or bisphenol A. The striking feature of the class of benzoxazines is the subtle combination of their inherently low viscosity at room temperature, good film-forming characteristics and high chemical and thermal stability mainly due to the introduction of melamine into the network of the polymers. The structure of the benzoxazines has been confirmed by proton nuclear magnetic resonance spectroscopy and fourier transform infrared spectroscopy. Thermal properties of polybenzoxazine have been studied by differential scanning calorimetry, dynamic mechanical analysis and thermogravimetric analysis. Transparent polybenzoxazine films were easily obtained under solvent-free conditions, exhibiting significantly improved toughness compared to the conventional polybenzoxazines. Our research may open a new path for overcoming the present drawbacks of polybenzoxazines such as high brittleness, the difficulties in preparing films and poor processibility via tailoring the structures and properties of amine in the benzoxazines.     

The Discrete Subgroups and Jфrgensen’s Inequality for SL(m,Cp)

In this paper, we give discreteness criteria of subgroups of the special linear group on Qp or Cp in two and higher dimensions. J rgensen's inequality gives a necessary condition for a nonelementary group of Mbius transformations to be discrete. We give a version of Jфrgensen's inequality for SL(m, Cp).