Synthesis and Properties of Aromatic Side Chained N‐Acyltaurate Surfactants

A series of anionic N‐acyltaurate surfactants, side chain containing aromatic nucleus (abbreviated as SAATT), were synthesized via Williamson reaction, hydrolyzation, and acylation. Krafft temperatures and surface properties of these surfactants at 30°C, that is, critical micelle concentration, cmc, surface excess concentration, Γ_max, surface area demand per molecule, A _min, efficiency in surface tension reduction, pC₂₀, effectiveness in surface tension reduction, π_cmc, and cmc/C₂₀ parameter were determined. It was shown that these surfactants exhibit good solubility which was confirmed by measuring Krafft temperature. The cmc of SAATT was much smaller than that of conventional surfactants with similar effective carbon numbers, and shifted to lower concentration with increasing hydrocarbon chain length. In addition, the γ_cmc decreased with decrease in Γ_max. The pC₂₀ and the cmc/C₂₀ got larger with the increase in hydrocarbon chain length. From the fluorescence intensity ratios of I ₁ (373 nm) and I ₃ (384 nm) using pyrene as a probe, it was indicated that the molecules of SAATT formed loose micelles with a broad size distribution.     

After‐Rinsing Hair Growth Promotions of Hinokitiol‐Containing Vesicles and Emulsions

Two kinds of topical dosage forms of hinokitiol (HKL), namely vesicles and oil‐in‐water (O/W) emulsions, were prepared. Behenyl trimethylammonium chloride (BTMAC) and fatty acids were used as bilayer‐forming materials of the vesicles, and oils were employed as oil phases of the emulsions. The substantivity of HKL in the preparations was evaluated in vitro using hairless mouse skins. After applying the preparations onto the skin and rinsing it, the amount of HKL left on the skin was determined using high performance liquid chromatography (HPLC). It was higher when HKL was encapsulated in cationic vesicles rather than in nonionic vehicles, emulsions. An ionic interaction between the cationic vehicle and negatively charged skin is likely to account for the high substantivity. Among the emulsion preparations, an emulsion having octyl salicylate as oil phase exhibited the highest substantivity of HKL. This is probably because that the oil is a good solvent for HKL and it is skin‐retentive. In vivo hair growth‐promotion effect of each dosage form was investigated, where the sample application onto the clipped backs of female mice (C57BL6) and the subsequent rinsing of the backs were done once a day for 30 days. Only HKL in the cationic vesicles had hair growth promotion effect, possibly due to the significant substantivity.     

Extraction Separation of BSA in Aqueous Two-Phase Systems of Anionic and Cationic Surfactant Mixtures

Aqueous two-phase systems (ATPS) are formed in mixtures of sodium dodecylsulfate (SDS), cetyltrimethyl ammonium bromide (CTAB), and sodium bromide (NaBr). Two different kinds of ATPS appear when CTAB and SDS surfactants are in excess, respectively. Such ATPS may provide a new, useful partitioning system for separation of bovine serum albumin (BSA). The partitioning of BSA was studied in these systems. The results show that the partitioning is affected by the electrical property, the hydrophobicity and the structure of liquid crystal (LC), which exists in the top phase of the ATPS. BSA is extracted into the top phase with higher distribution coefficient when LC and BSA are oppositely charged. The hydrophobicity of LC, which can be improved by increasing the length of alkyl group, enhances the distribution coefficient. The hydrophobicity of lamellar LC and hexagonal LC is stronger than that of cubic LC, which causes extractive capability of the former is higher than the latter.     

Raney Ni催化二亚糠基丙酮加氢制取长链烷烃前驱体的特性研究

采用Raney Ni为催化剂,考察了反应温度、压力、时间和溶剂对二亚糠基丙酮加氢制取长链烷烃前驱体催化性能的影响。结果表明,Raney Ni对二亚糠基丙酮具有很好的低温加氢性能,升高反应温度和压力均有利于加氢反应的进行,但过高的温度反而不利于加氢反应。在50℃和2.5 MPa下反应2 h,二亚糠基丙酮转化率达99.5%以上,饱和加氢产物的总选择性达到80.8%。此外,加氢中间产物的变化结果表明,二亚糠基丙酮的双键加氢容易程度为,烯键>呋喃环双键>C=O双键。Raney Ni 在甲醇溶剂中的加氢性能明显高于在四氢呋喃、环己烷或水溶剂中的加氢性能。     

体积排阻色谱-电感耦合等离子体质谱分析富硒大米含硒蛋白组成

建立体积排阻色谱-电感耦合等离子体质谱(SEC-HPLC-ICP-MS)联用技术分析富硒大米含硒蛋白组成方法。通过水提、盐提、碱提和醇提方法提取,并用丙酮沉淀蛋白,硒的回收率分别为9.6%,16.8%,48.2%和14.9%,纯化后的蛋白结合硒的量由大到小依次为碱溶谷蛋白>球蛋白>醇溶蛋白>清蛋白。蛋白液经SEC-HPLC-ICP-MS检测,通过蛋白色谱峰(λ=280 nm)和ICP-MS硒峰(78Se)对比分析,利用分子量标准曲线测定出4类蛋白中含硒蛋白的分子量。结果表明,富硒大米中清蛋白和醇溶蛋白并不是硒的主要存在蛋白。硒主要存在于>7 kDa的碱溶谷蛋白和球蛋白,其中碱溶含硒蛋白主要组分F1分子量为199.8 kDa。     

Efficient white emitting copolymers based on bipolar fluorene-co-dibenzothiophene-S,S-dioxide-co-carbazole backbone

Efficient white light emitting polymers were synthesized based on poly(9,9-dioctylfluorene-co-dibenzothiophene-S,S-dioxide) as blue emitter and a bisphenylamine functionalized 2,1,3-benzothiadiazole (DPABT) as red emitter. It was found that the incorporation of hole-transporting carbazole moiety into polymer main chain could effectively reduce the hole injection barriers, which can lead to distinctly improved charge balance in the emissive layer. Additionally, the hole-transporting carbazole units may form efficient bipolar host with electron-transporting dibenzothiophene-S,S-dioxide units. The white light emitting diodes based on single polymer PFSOCzDPABT showed the maximum luminous efficiency of 3.3 cd/A with the maximum luminance of 10282 cd/m2 , and the luminous efficiency showed only 24% roll off at current density of 400 mA/cm2 . These Commission Internationale d’Enclairage (CIE) coordinates of the devices changed slightly with the driving voltages increasing from 8 V to 12 V, and were very close to National Television System Committee (NTSC) standard white light emission of (0.33, 0.33). The results indicated that the incorporating bipolar host and low band gap DPABT unit was a promising way to achieve efficient single white light emitting copolymers.     

碳纳米管担载纳米Ir催化生物质基乙酰丙酸合成γ-戊内酯

以碳纳米管(CNTs)担载Ir纳米粒子为催化剂进行生物质基平台化合物乙酰丙酸(LA)选择加氢制备γ-戊内酯(GVL)的研究,并利用X射线衍射、X射线光电子能谱和透射电镜表征了使用前后的Ir/CNT催化剂,探讨了影响LA催化加氢制GVL反应性能的因素和该反应的可能路径.结果表明,与Ru,Rh和Pd等传统铂族金属相比,Ir/CNT催化剂不但可在温和条件下(50℃,2.0 MPa,H₂)实现LA至GVL的完全转化,且可对多类直接源于生物质水解的含等量LA/甲酸的“真实”体系实现GVL的高效选择合成.     

Synthesis and Crystal Structure of Novel Mixed-metal Alkoxide Clusters of Ytterbium and Sodium: Yb4O4（OiPr）16Na12

The mixed-metal cluster Yb4O4(OiPr)16Na12 has been synthesized and structurally determined by IR, elemental analysis, and single-crystal X-ray diffraction. The crystal belongs to the cubic system, space group P23 with a = b = c = 13.9788(3), V = 2731.55(10)3 , Z = 1, Dc = 1.202 g/cm 3 , Mr = 1977.42, = 3.480 mm-1 , F(000) = 972, the final R = 0.0288 and wR = 0.1511 for 1677 observed reflections with Ⅰ > 2σ(Ⅰ). X-ray analysis reveals that Yb4O4 (OiPr)16Na12 is centrosym-metric and the structure contains four ytterbium metals and twelve sodium metals, and each ytterbium atom is coordinated by six oxygen atoms. In addition, an ancillary computational analysis of the optimized molecular unit was provided. The large energy gap (3.31 eV) between HOMO and LUMO indicates that the structure framework is particularly stable.     

Preparation of single-hole hollow polymer nanospheres by raspberry-like template method

Single-hole hollow polymer nanospheres were fabricated by raspberry-like template method using "graft-from" strategy through atom transfer radical polymerization (ATRP). Nanometer-sized silica spheres were covalently attached onto the surfaces of micrometer-sized silica spheres. Crosslinked polymer shells on the nano-sized spheres outside the attached area were formed by "graft-from" strategy through ATRP. After removal of the silica cores, single-hole hollow crosslinked polymer nanospheres were obtained. In this strategy, most of ATRP monomers may be used and thus many functional groups can be easily incorporated into the single-hole hollow crosslinked polymer nanospheres.     

Multiple discrete energy levels and the bistable state of weak anchoring NLC cells

The weak anchoring nematic liquid crystal (NLC) cell is investigated with regard to energy. Because the Gibbs free energy of liquid crystal system used in theory does not include temperature and entropy, and because the equations and boundary conditions for δG=0 are also the mechanical equilibrium conditions of the continuum, the Gibbs free energy G is equivalent to the energy E of the liquid crystal continuum. There are multiple solutions which satisfy these equations and boundary conditions, each solution corresponding to a certain energy value. We call these discrete energy values and energy levels. Adopting a simple liquid crystal cell model, the energy levels are calculated in detail by means of analytical and numerical methods. The results show that there are three energy levels (or more in certain cases). The values and sequence of the energy levels are related to the external field and anchoring parameters. The relationships between the energy level structure and the bistable. Fréedericksz transition are disussed, together with their influence on the response time. The physical condition for the existence of more than three energy levels is also given.