含羧基聚有机硅氧烷—PEO复合物与LiCF3SO3复合膜的离子传导性

本文研究了含羧基聚有机硅氧烷——PEO复合物与LiCF_3SO_3复合膜的离子传导性能。实验结果表明,利用PEO与含羧基聚有机硅氧烷复合的方法能进一步提高含羧基聚有机硅氧烷—Li~+固体电解质膜的离子传导性。此复合膜在室温下的离子导电率可达10~(-5)S cm~(-1)。本文还研究了复合膜中所用PEO的分子量、PEO用量,LiCF_3SO_3含量、交联剂用量及温度对复合膜离子传导性的影响。     

Investigation of a liquid-liquid extraction system based on non-ionic surfactant-salt-H2O and mechanism of drug extraction

Based on the investigation of a non-ionic surfactant-salt-H₂O liquid-liquid extraction system, general rules concerning salt selection are concluded and the mechanism of phase separation is explained. The extraction behavior of chlorpromazine hydrochloride (CPZ) and procaine hydrochloride (PCN) in such a system is studied. Research shows that the extraction efficiency of CPZ can amount to 96% by twice extraction, which means that quantitative extraction is realized, while that of PCN is 77%. This system produces distribution coefficients (K_D) of 12.3 and 2.6, respectively, for CPZ and PCN. Extraction mechanism is deduced according to ultraviolet absorbance; and molecular fluorescence spectra change of the drugs in the system studied.     

希土Eu(Ⅲ)与2-丙酰-茚满二酮-1,3的二元、三元配合物的合成、表征及发光性能研究

合成2-丙酰-茚满二酮-1,3及其Eu(Ⅲ)的二元、三元固态配合物,经化学分析、元素分析确定了配合物的化学组成,通过红外光谱、紫外光谱进行表征,用配合物的荧光光谱和配体低温磷光光谱分析了配合物的荧光强度和能有效发光的原因.     

聚合物-金属纳米复合材料的制备与应用

综述了聚合物-金属纳米复合材料的制备方法，包括原位形成法、沉积法、离子注入法、辐射化学法、光照化学法、直接分散法、球磨法；介绍了聚合物．金属纳米复合材料的应用领域，最后展望了这种材料的发展前景。     

双波长分光光度法同时测定岩石矿物中的微量金和钯

本文提出以硫代米蚩酮为显色剂，用双波长分光光度法同时测定岩石矿物中的微量金和钯的方法，消除了测定金钯的相互干扰，该方法简便，快速，选择性好，用于矿石样品中金和钯的测定，结果满意。     

Ni-SDC固体氧化物燃料电池阳极的合成和性质

采用柠檬酸-硝酸盐溶胶-凝胶低温自蔓延燃烧法制备氧化镍（NiO）粉末和Ce0.8Sm0.2O1.9（SDC）粉末，并将NiO与SDC按不同质量比和不同制备工艺制备了固体氧化物燃料电池（SOFC）的阳极前身。再用自组装的还原装置将其在820℃经2．5h还原后，采用四端子法测量其电导率值。分析了阳极片电导率与阳极片微结构、Ni的质量百分数、混合研磨时间及烧结温度之间的关系。结果显示，阳极片的电导率强烈依赖于镍含量和制备工艺。     

Deposition of Layer－by－layer Inorganic－organic Nano－hybrid Ultrathin Films onto SBA－15

Deposition of inorganic-organic nano-hybrid ultrathin films onto mesoporous silicate materials has been proven possible by using layer-by-layer assembly method. In combination with sol-gel method, titania, subsequently dye molecules (or polymer) were successfully fabricated onto the inner wall of SBA-15. Their structures were preliminarily characterized by FTIR and solid-state UV-Vis spectroscopy, thermal analysis, and BET surface area measurements,respectively.     

钠硼硅酸盐玻璃分相及浸析的NMR研究

用多种ＮＭＲ方法，包括＾２９Ｓｉ、＾２３Ｎａ，＾１１Ｂ ＭａＳ及＾２９Ｓｉ ＣＰ／ＭＡＳ ＮＭＲ，研究了一定组成的ａ２Ｏ－Ｂ２Ｏ３－ＳｉＯ２三元体系玻璃在不同温度下分相处理２４小时及用酸浸析处理后的结构变化。结果表明，在低于分相上界临界温度的范围内，存在着一个温度转折点，低于这一温度时，受动力学因素影响，分相未达平衡态，温度愈低，距平衡态愈过，分相愈下完全。超过这一温度，分相可达平衡态，受热力学控     

Fabrication of hexaphenylsilole nanowires and their morphology-tunable photoluminescence.

Immersion of nanoporous alumina membranes into saturated solutions of hexaphenylsilole with subsequent solvent evaporation affords aligned organic nanowires. The luminescent properties of the hexaphenylsilole nanowires can be manipulated by varying their morphologies, which were controlled by changing the channel sizes of the alumina templates.