Notable shift of ultraviolet intensity on Sn-doped ZnO nanostructure fabricated by sol–gel method

Sn-doped ZnO (SZO) thin films are deposited by sol–gel dip-coating method with Sn content at 0 at.% and 1–15 at.% with an increment of 2 at.%. The structure and luminescence of the films are investigated. X-ray diffraction results indicate that all the SZO samples show preferential orientation along the (002) direction, and the scanning electron microscope exhibits that the surface morphology of the films change from nanoparticles to nanorods with increasing Sn concentration. X-ray photoelectron spectroscopy reveals that Sn exists as valence of +4 in the matrix. The photoluminescence peaks at 381 and 398 nm are observed in all the samples. The ratio of intensity of peak at 381 nm to that of peak at 398 nm differed markedly. The intensity of peak at 398 nm might be due to the response for the Sn atoms, while the intensity of peak at 381 nm is probably related to the quantum size effect.     

Ligand effect in the synthesis of hyperbranched polymers via copper-catalyzed azide-alkyne cycloaddition polymerization (CuAACP)

Copper-catalyzed azide-alkyne cycloaddition polymerization (CuAACP) of AB₂ monomers demonstrated a chain-growth mechanism without any external ligand because of the complexation of in situ formed triazole groups with Cu catalysts. In this study, we explored the use of various ligands that affected the polymerization kinetics to tune the polymers’ molecular weights and the degree of branching (DB). Eight ligands were studied, including polyethylene glycol monomethyl ether (PEG₃₅₀, M_n = 350), tris(benzyltriazolylmethyl)amine (TBTA), 2,6-bis(1-undecyl-1H-benzo[d]imidazol-2-yl)pyridine (Py(DBim)₂), 2,2′-bipyridyl (bpy), 4,4′-di-n-nonyl-2,2′-bipyridine (dNbpy), N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA), N,N,N′,N″,N″-penta(n-butyl)diethylenetriamine (PBuDETA), and N,N,N′,N″,N″-pentabenzyldiethylenetriamine (PBnDETA). All ligands except PEG₃₅₀ exhibited stronger coordination with Cu(I) than the polytriazole polymer, which freed the Cu catalyst from polymers and resulted in dominant step-growth polymerization with simultaneous chain-growth feature. Meanwhile, the use of PEG₃₅₀ ligand retained the confined Cu in the polymer, demonstrating a chain-growth mechanism, but lower polymer molecular weights as compared with the no-external-ligand polymerization. Results indicated that aliphatic substituent groups on ligands had little effect on the molecular weights and DB of the polymers, but rigid aromatic substituent groups decreased both values. By varying the ligand species and amounts, hyperbranched polymers with DB value ranging from 0.53 ([TBTA]₀/[Cu]₀ = 5) to 0.98 ([PMDETA]₀/[Cu]₀ = 2) have been achieved. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2238–2244     

Determination of hydroxysafflor yellow A in biological fluids of patients with traumatic brain injury by UPLC‐ESI‐MS/MS after injection of Xuebijing

A simple, novel, specific, rapid and reproducible ultra‐performance liquid chromatography electrospray ionization tandem mass spectrometry method has been developed and validated for the determination of hydroxysafflor yellow A (HSYA) in biological fluids (plasma, urine and cerebrospinal fluid) of patients with traumatic brain injury after intravenous injection of Xuebijing (XBJ). Liquid–liquid extraction was performed, and separation was carried out on an Acquity UPLC? BEH C₁₈ column, with gradient elution using a mobile phase composed of methanol and 0.1% formic acid at a flow rate of 0.3 mL/min. A triple quadrupole tandem mass spectrometer with electrospray ionization was used for the detection of HSYA. The mass transition followed was m/z 611.0 → 491. The retention time was less than 3.0 min. The calibration curve was linear in the concentration range from 2 to 6125 ng/mL for cerebrospinal fluid, plasma and urine. The intra‐ and inter‐day precisions were <10%, and the relative standard deviation of recovery was <15% for HSYA in biological matrices. The method was successfully applied for the first time to quantify HSYA in the biological fluids (especially in cerebrospinal fluid) of patients with traumatic brain injury following intravenous administration of XBJ. Copyright © 2014 John Wiley & Sons, Ltd.     

Experimental Study of Liquid Hydrocarbons Pyrolysis to Acetylene in H2/Ar Plasma

Liquid hydrocarbons including n-hexane, cyclohexane and toluene are pyrolyzed in H₂/Ar plasma to investigate the effects of feedstock properties and key operating conditions (e.g., the feedstock specific input power and residence time) on the reaction performance. The experiments verify that the non-aromatic hydrocarbons show better chemical reactivity than partially aromatic substances. Meanwhile, the straight-chain alkanes and cycloalkanes have better yields of ethylene during the pyrolysis. The results also demonstrate that the pyrolysis reactions are almost completed within the first 0.8?ms in Ar/H₂ plasma independent of the feed substances (i.e., liquid hydrocarbons), where the increased feedstock specific input power enhances the reactant conversions and correspondingly raises the yields of acetylene. At a feedstock specific input power of 4.7?×?10⁴?kJ/kg, the n-hexane conversion is over 90?% and the yield of acetylene reaches 70?%. In addition, when using n-hexane as the feedstock, very little coke is formed during the course of reaction. Comprehensive comparisons of the current experiments with the data reported in the literature are made to point out the key influencing factors, i.e., the effective mass ratio of C/H (R _C/H) in the gaseous phase and the quench temperature. Both two factors would need to be enhanced in order to get a better performance. Finally, the improvements on the specific energy requirement of this process are discussed.     

Film-forming characteristics and thermal stability of low viscosity benzoxazines derived from melamine

A novel class of low-viscosity benzoxazines has been synthesized from melamine and formaldehyde with phenol or bisphenol A. The striking feature of the class of benzoxazines is the subtle combination of their inherently low viscosity at room temperature, good film-forming characteristics and high chemical and thermal stability mainly due to the introduction of melamine into the network of the polymers. The structure of the benzoxazines has been confirmed by proton nuclear magnetic resonance spectroscopy and fourier transform infrared spectroscopy. Thermal properties of polybenzoxazine have been studied by differential scanning calorimetry, dynamic mechanical analysis and thermogravimetric analysis. Transparent polybenzoxazine films were easily obtained under solvent-free conditions, exhibiting significantly improved toughness compared to the conventional polybenzoxazines. Our research may open a new path for overcoming the present drawbacks of polybenzoxazines such as high brittleness, the difficulties in preparing films and poor processibility via tailoring the structures and properties of amine in the benzoxazines.     

Cluster synchronization in nonlinearly coupled delayed networks of non-identical dynamic systems

In the real world, many networks show community structure, i.e., clusters of nodes, which have a high density of links within the same cluster but a lower density of links between different clusters. In this paper, nonlinearly coupled networks with community structure and non-identical nodes and with time-varying delay are considered. By applying pinning control to a fraction of network nodes, and using a suitable Lyapunov function, we obtain some new and useful synchronization criteria, which guarantee that various clusters are synchronized independently. An example is presented to show the application of the criteria obtained in this paper.     

The Discrete Subgroups and Jфrgensen’s Inequality for SL(m,Cp)

In this paper, we give discreteness criteria of subgroups of the special linear group on Qp or Cp in two and higher dimensions. J rgensen's inequality gives a necessary condition for a nonelementary group of Mbius transformations to be discrete. We give a version of Jфrgensen's inequality for SL(m, Cp).     

Effects of monomer structure on the morphology of polymer networks and the electro-optical properties of polymer-dispersed liquid crystal films

Polymer-dispersed liquid crystal (PDLC) films were prepared by photochemical polymerisation with a series of (meth)acrylate monomers. The effects of monomer structure on the morphology of polymer networks in the PDLC films were studied. The acrylate monomers without sidegroup chain formed uniform polymer networks. The methacrylate monomers with methyl as their sidegroup chains formed lace-like networks. The size of the LC droplets increased with increasing the length of the flexible chain of both methacrylate and acrylate monomers. Meanwhile, the effects of the morphology of the polymer network on the electro-optical properties of PDLC films were also investigated.