K2NiF4型结构的A2－xSrxBO4(A＝La, Dy, B＝Mn, Fe, Co, Ni)希土复合氧化物的合成

以典型的轻希土镧和重希土镝及碱土金属锶作为Ａ位离子，以过渡金属锰、铁、钴、镍作为Ｂ位离子，合成了Ｋ２ＮｉＦ４型结构的Ａ２－ｘＳｒｘＢＯ４希土复合氧化物，采用粉末Ｘ射线衍射技术考察了反应条件等因素对生成Ｋ２ＮｉＦ４型四方（Ｔ）结构上析影响，实现结果表明，四方结构的形成不仅与几何因素有关，而且与各组分的物理化学性质有关。各个不同的组成，生成四方相的温度范围也有所不同。适当地提高反应温度以及延长灼烧时间     

载波钝化和钼酸盐后处理对不锈钢钝化膜性能的影响

一般认为交流电对金属的腐蚀过程具有加速作用,但我们发现,在直流电位基础上叠加适当波形、幅值和频率的交流电对不锈钢进行载波钝化,尔后再进行适当后处理可使钝化膜的稳定性提高,我们曾就不经后处理的载波钝化过程进行过探讨,本文着重探讨钼酸盐后处理对载波钝化膜表面状态和化学稳定性改善的作用机理。     

Deposition of Layer－by－layer Inorganic－organic Nano－hybrid Ultrathin Films onto SBA－15

Deposition of inorganic-organic nano-hybrid ultrathin films onto mesoporous silicate materials has been proven possible by using layer-by-layer assembly method. In combination with sol-gel method, titania, subsequently dye molecules (or polymer) were successfully fabricated onto the inner wall of SBA-15. Their structures were preliminarily characterized by FTIR and solid-state UV-Vis spectroscopy, thermal analysis, and BET surface area measurements,respectively.     

钠硼硅酸盐玻璃分相及浸析的NMR研究

用多种ＮＭＲ方法，包括＾２９Ｓｉ、＾２３Ｎａ，＾１１Ｂ ＭａＳ及＾２９Ｓｉ ＣＰ／ＭＡＳ ＮＭＲ，研究了一定组成的ａ２Ｏ－Ｂ２Ｏ３－ＳｉＯ２三元体系玻璃在不同温度下分相处理２４小时及用酸浸析处理后的结构变化。结果表明，在低于分相上界临界温度的范围内，存在着一个温度转折点，低于这一温度时，受动力学因素影响，分相未达平衡态，温度愈低，距平衡态愈过，分相愈下完全。超过这一温度，分相可达平衡态，受热力学控     

Cl/Ag体系研究 Ⅱ.Cl吸附引起的表面结构变化

运用LEED,UPS和HREELS等表面技术研究了氯吸附至(c)阶段的Ag(111)表面结构.结果表明,表面上有三维的AgCl(111)生成,其生长按修正的Stranski-Krastanov模式进行.伴随着AgCI(111)生长的同时,表面上产生缺陷.这种缺陷只有在氯吸附至(c)阶段时表面上形成三维AgCI的过程中才能产生,它一旦在表面上形成后,表面上氯的存在与否对其不产生影响.本文提出了一个(c)阶段时的Cl/Ag(111)体系的结构模型.     

四川省德阳地区泥炭资源的表征及质量评估

本文报导了对四川省德阳地区八种不同来源的泥炭进行全面分析的结果,并与黑龙江省腐值土及山西褐煤进行比较。结果表明,四川省德阳地区泥炭的腐植酸含量大都在20—30%之间,属于中腐酸泥炭,有机质含量在40—50%之间,属于中有机质炭。对从上述八种泥炭中提取的腐植酸进行表征,平均分子量为327.78,其结构是由C、N、H、O、S等元素组成,含有-COOH、-NH、-OH基的结构比较复杂的芳香有机化合物。     

生物金属与胆固醇相互作用的经验势函数计算

流行病学调查和医学实验均证实，以胆固醇在动脉血管壁沉着、形成病灶及纤维增生使管壁变硬为特征的动脉粥样硬化（AS），与血中某些金属元素的水平密切相关＊．一些临床医学观测报道了冠心病患者血中金属元素铜、锌、铬、钢等的水平与胆固醇含量变化的关系［2－6］，以期通过改善人体内微量元素的失调来抑制AS的发生和发展．AS患者血中生物金属铜、锌、铬、锅水平与胆固醇含量有关，可能意味着两者存在某种相互作用制约关系．本文通过金属一胆固醇间、胆固醇分子间、受金属离子影响的胆固醇分子间的各种模型构造，选用恰当的经验势函数…     

A microfluidic device using a green organic light emitting diode as an integrated excitation source

A simply fabricated microfluidic device using a green organic light emitting diode (OLED) and thin film interference filter as integrated excitation source is presented and applied to fluorescence detection of proteins. A layer-by-layer compact system consisting of glass/PDMS microchip, pinhole, excitation filter and OLED is designed and equipped with a coaxial optical fiber and for fluorescence detection a 300 microm thick excitation filter is employed for eliminating nearly 80% of the unwanted light emitted by OLEDs which has overlaped with the fluorescence spectrum of the dyes. The distance between OLED illuminant and microchannels is limited to approximately 1 mm for sensitive detection. The achieved fluorescence signal of 300 microM Rhodamine 6G is about 13 times as high as that without the excitation filter and 3.5 times the result of a perpendicular detection structure. This system has been used for fluorescence detection of Rhodamine 6G, Alexa 532 and BSA conjugates in 4% linear polyacrymide (LPA) buffer (in 1 x TBE, pH 8.3) and 1.4 fmol and 35 fmol mass detection limits at 0.7 nl injection volume for Alexa and Rhodamine dye have been obtained, respectively.     

A spectroscopic study on the 12-heteropolyacids of molybdenum and tungsten (H3PMo12−nWnO40) combined with cetylpyridinium bromide in the epoxidation of cyclopentene

The epoxidation of cyclopentene with hydrogen peroxide catalyzed by 12-heteropolyacids of molybdenum and tungsten (H₃PMo_12−nW_nO₄₀, n = 1–11), 12-tungstophosphoric acid and 12-molybdophosphoric acid combined with cetylpyridinium bromide as a phase transfer reagent was carried out in acetonitrile. Among 13 heteropolyacids investigated, catalyst of H₃PMo₆W₆O₄₀ showed the highest activity, giving a conversion of 60% and a selectivity of 95% in the epoxidation of cyclopentene. The fresh catalysts and the catalysts under reaction condition were characterized by UV–vis, FT-IR and ³¹P NMR spectroscopy, which has revealed that all of the molybdotungstophosphoric acids were degraded in the presence of hydrogen peroxide to form a considerable amount of phosphorus-containing species. The active species resulted from H₃PMo₆W₆O₄₀ are new kinds of phosphorus-containing species, which is different from {PO₄[WO(O₂)₂]₄}³⁻.