A kinetic approach to homogeneous Ziegler type polymerization. Steady state

In this paper we present a kinetic approach to the analysis of steady-state homogeneous Ziegler-Natta polymerization activity data. The influence of the number of monomeric species that are coordinated to the active site on the apparent rate law is discussed and the equations are fitted to the experimental results.     

Theoretical Study on the Structures and Electronic Spectra of the Derivatives of C_(60)-P-2,4,6-Triphenyl Borazinc

1 INTRODUCTION The electron-transfer reaction of C60 derivatives, especially light-induced electron-transfer reaction, has been an active research field for a long time. Many researches are focused on the long-live charge- separated state caused by electron-transfer[1]. And several electron-transfers between electron donor and C60 or intramolecular electron-transfer have been confirmed. As an example, TTF-C60 is proved to be a short-live charge-separated compound[2].Due to the excelle…     

Dye-sensitized solar cells based on composite solid polymer electrolytes

The ionic conductivity of polymer electrolytes and their interfacial contact with dye-attached TiO2 particles were enhanced markedly by the addition of amorphous oligomer into polymer electrolytes, resulting in very high overall energy conversion efficiency.     

An addition to the oxoacid family: H2B12(OH)12

The acid H(2)B(12)(OH)(12) can be isolated as a crystalline solid by protonation of the hydroxylated borane anion, B(12)(OH)(12)(2)(-). This acidic compound has low solubility in water, conducts protons in the solid state, and has thermal stability to a temperature of 400 degrees C. The conductivity mechanism is a Grotthuss mechanism with a low activation enthalpy (9-13 kcal/mol). This new acid represents an addition to the class of oxoacids, of which sulfuric and phosphoric acid are the most prominent examples.     

Unlabeled Fluoroimmunoassay with a Europium Chelate

Unlabeled fluoroimmunoassay with a europium chelate is described. The recommended method is simple because the complicated labeling process is omitted. The recovery of some samples ranges from 91 to 111%. The relative standard deviation of the method is less than 10%. The detection limit is about 10⁻¹⁰mol liter⁻¹antigen.     

1,4-dioxane as a solvent in spectroscopy and photochemistry

Commercially available 1,4-dioxane, even of spectroscopic grade, contains various impurities that arise mostly from reaction of the solvent with oxygen. Aspects relevant to the spectroscopy and photochemistry of the dioxane/oxygen system are discussed. Methods of purification and storage of the solvent are presented.     

Concentration effects in gel permeation chromatography : IV. Contribution of viscosity phenomena and macromolecular expansion

The changes in elution volumes with the changes in the concentration of an injected polymer solution are caused by several contributing effects. Under model conditions, it is possible to assume only the effect of a viscosity gradient in a zone moving along the column and the effect of the concentration dependence of the hydrodynamic volume of a macromolecular coil. The non-Gaussian shape of the zone and the dependence of the width of the elution curve on concentration are factors that complicate the theoretical treatment of concentration effects. The described physico-chemical model allows to evaluate the ratio of mentioned two contributions in the concentration dependence of elution volumes. According to this model, the contribution of the concentration dependence of the hydrodynamic volume does not exceed about 20% of the total change in elution volume with the varying concentration under real experimental conditions. The efficiency of the columns used and the total injected volume of the polymer solution affect this ratio only negligibly. It is obvious from a comparison with earlier results that these conclusions are not fundamentally changed even by the revised model of the concentration dependence of the swelling factor.     

Cyclization reactions of N-acryloyl-2-aminobenzaldehyde derivatives: formal total synthesis of martinellic acid

N-Alkyl acryloylamides derived from o-aminobenzaldehyde derivatives react with N-alkyl glycine derivatives to provide cis-fused pyrrole[3,2-c]quinolones in moderate yield and high diastereoselectivity. These same substrates engage in a tandem Michael-Mannich pathway on treatment with a secondary amine, providing corresponding quinolone derivatives. The elaboration of a pyrroloquinolone derivative via addition of an in situ generated functionalized copper acetylide to an in situ generated iminium ion provided the C2-substituted derivative. Global deprotection and reduction of the alkyne afford the tricyclic triamine core (as the HCl salt) found in martinellic acid.     

On-line filtration system for determining total chromium and chromium in the soluble fraction of industrial effluents by flow injection flame atomic absorption spectrometry

Two manifolds were assessed for the purpose of determining both the total chromium content and that present as a soluble form in industrial effluents by flow injection flame atomic absorption spectrometry (FI-FAAS). To determine the chromium content in the soluble fraction the samples were used without additional treatment, a 0.45 microm filter being included in the FI system. To determine the total chromium content, the samples were acidified with nitric acid 20% (v/v) and heated for 30 s in a microwave oven (temperatures of about 70 degrees C were reached). The problem posed by the very different concentration range in which total and soluble chromium are present was overcome by using programmed flow rate methodology and by only partially emptying the sample loop. A personal computer controlled both the rotation speed of a peristaltic pump and the volume of sample injected into the system, thus obtaining the dispersion degree required. Using the manifold proposed, the chromium content in the soluble fraction can be determined in the 0.5-20 microg mL(-1) range using a 10 microg mL(-1) single standard for calibration. To determine the total chromium content, a calibration line in the 20-200 microg mL(-1) range was obtained using a single 50 microg mL(-1) chromium standard solution. The reliability of the semi-automatic devices was verified by comparing the results obtained with those found by treating the samples and using both FAAS in a conventional way and a spectrophotometric method using diphenylcarbazide at the 95% confidence level (ANOVA test). The proposed procedures showed a RSD lower than +/-3%.     

Determination of iron at ng/ml level by solid phase spectrophotometry after preconcentration on cation exchange filters

A cationic exchanger paper is used to retain analytes in solution and, after drying, to analyze directly by measuring the UV-Vis absorbance of the paper. The method was applied to determination of iron using its known 1,10-phenanthroline complex. Using 100 ml of sample the applicable concentration range was between 1.0 and 10.0 ng/ml with a detection limit of 0.2 ng/ml and a RSD around 2%. The method was applied to determination of iron total in snow, human serum and wine.