有机-无机杂化凝胶法合成YAG∶Ce~(3+)荧光粉的包膜及其稳定性

本文以金属硝酸盐为原料,柠檬酸为配位剂的有机-无机杂化凝胶法来合成掺杂三价铈离子的钇铝石榴石荧光粉,采用X-射线衍射法研究了杂化凝胶在煅烧过程中的相转变机制。结果表明:杂化凝胶在煅烧过程中可以通过两条途径形成Y3Al5O12(YAG)相:一是由无定形Y2O3和Al2O3直接向YAG相的一步相转变;二是由无定型Y2O3和Al2O3经由YAlO3(YAP)和γ-Al2O3向YAG相的两阶段相转变,在900℃得到结晶性好的纯YAG∶Ce3 荧光粉,其最大激发波长为459nm,最大发射峰波长为550nm;在荧光粉表面包覆氧化铝和氧化镧,将使荧光粉的荧光强度稍有降低,但对荧光粉的稳定性有很好的改进作用。     

气相色谱过程的计算机模拟及操作条件的优化

建立了气相色谱过程的动态数学模型,给出了模型的实用算法,并据此对各种操作条件下的色谱流出曲线进行了动态模拟计算。模拟计算结果表明该模型是有效的,能够用于各种程序控制的色谱过程,可得到色谱分离的优化条件。     

Di­chloro­bis(1‐propyl­imidazolidine‐2‐thione‐κS)­cobalt(II)

The crystal structure of the title compound, [CoCl₂(C₆H₁₂N₂S)₂], consists of monomer units of a Co^II atom coordinated to two 1‐propyl­imidazolidine‐2‐thione ligands and to two chloride ions. The heterocyclic thione ligand is monodentate and coordinated to the metal through the thione S atom. The environment around the Co^II atom is a slightly distorted tetrahedron. The Co—S bond lengths are 2.341 (2) and 2.330 (2) Å, and the Co—Cl bond lengths are 2.234 (2) and 2.238 (2) Å. The most important point of distortion is the S—Co—S bond angle of only 97.83 (8)°. Intramolecular classical hydrogen bonds are found between the chloride ions and the N—H groups. Additionally, intra‐ and intermolecular non‐classical hydrogen bonds are found.     

Microcalorimetric investigation of the growth of the <Emphasis Type="Italic">Escherichia coli</Emphasis> DH5α in different antibiotics

The effects of Amoxicillin Sodium and Cefuroxime Sodium on the growth of E. coli DH5α were investigated by microcalorimetry. The metabolic power-time curves of E. coli DH5α growth were determined by using a TAM air isothermal microcalorimeter at 37°C. By evaluation of the obtained parameters, such as growth rate constants (k), inhibitory ratio (I), the maximum heat power (P _m) and the time of the maximum heat power (t _m), one found that the inhibitory activity of Amoxicillin Sodium vs. E. coli DH5α is enhanced with the increasing of the Amoxicillin Sodium concentration, and the Cefuroxime Sodium has a stimulatory effect on the E. coli DH5α growth when the concentration is about 1 μg mL⁻¹. The IC₅₀ for the Amoxicillin Sodium and the Cefuroxime Sodium are 1.6 and 2.0 μg mL⁻¹, respectively, it implicates that the E. coli DH5α is more sensitive to Amoxicillin Sodium than Cefuroxime Sodium.     

Thermal Emulsion Polymerization without any Conventional Initiators and Emulsifiers

Stable poly(styrene-co-sodium styrene sulfonate) (P(St-NaSS) nanoparticles with broader size distribution were synthesized by thermal emulsion polymerization without any conventional initiators and emulsifiers. The obtained polymer nanoparticles have higher ξ potential, and the particle sizes have broad distribution. The stability of polymer particles originated from the addition of small amounts of ionic comonomer, NaSS, which can act as an emulsifier in somewhat. The monomer conversion could reach up to about 28 wt% in 48 h, and did not increase by further polymerization when higher polymerization temperature (120 ℃) was employed. This polymerization system may be give some further understand for mechanism of emulsion polymerization.     

Synthesis and electrochemical properties of spinel LiMn2O4 prepared by the rheological phase method

Pure-phase and well-crystallized spinel LiMn₂O₄ powders were successfully synthesized by a simple rheological phase method. The thermal behavior and structure properties of the powders prepared by the rheological phase method compared with the solid-state reaction were investigated by thermogravimetry, powder X-ray diffraction , scanning electron microscopy and transmission electron microscopy. According to the results of the electrochemical tests, it is obvious that the sample resulting from the rheological phase method shows higher discharge capacity and better cycling stability than one formed in the solid-state reaction. The cyclic voltammogram and columbic efficiency curves also confirm that the product by the rheological phase method has a good cycling performance due to its fine cubic spinel structure and morphology.     

An Efficient and High‐Yield One‐Pot Synthesis of Bis(oxazoline)s

An efficient and mild one‐pot synthesis of bis(oxazoline) (BOX) ligands is developed from reactions of dicarboxy dichlorides with β‐amino alcohols in the presence of 11.0 equiv. NEt₃ followed by the addition of 3.6 equiv. methanesulfonyl chloride (MsCl). Nine different BOX ligands were prepared in excellent yields of ≥ 80%. Advantages of this improved synthesis are mild reaction conditions, short total reaction time of 9 h, and high isolated yields.     

Preparation and Evaluation of Molecularly Imprinted Monolithic Column for Felodipine in Micro-liquid Chromatography

This study concentrated on the production of molecularly imprinted polymers (MIPs) as highly selective sorbents for felodipine (FLD), a representive dihydropyridine calcium antagonists. Demonstrated chromatographically through a selection factor, these MIPs showed high selectivity for the template molecule among a group of structurally similar compounds. The recognition was found to correlate with structural similarity to the template compound.     

(EnH2)2Ge2S6的合成与结构表征

用溶剂热方法制备了(EnH2)2Ge2S6单晶.单晶X射线衍射分析结果表明,(EnH2)2Ge2S6属单斜晶系,P2(1)/n空间群,晶胞参数a=0.67125(5)nm,b=1.12290(4)nm,c=1.07518(4)nm,β=92.288(2)°,Z=2.利用DSC及TG分析研究了其热稳定性,结果表明,该化合物在200℃以下能够稳定存在.     

Synthese und Struktur von [(Ph3PAu)3NPPh3][PF6]2, einem Gold(I)‐phosphoraniminato‐Komplex

Synthesis and Crystal Structure of [(Ph₃PAu)₃NPPh₃][PF₆]₂, a Gold(I) Phosphoraneiminato Complex The photolytic reaction of Ph₃PAuN₃ with Cr(CO)₆ in THF yields the phosphoraneiminato complex [(Ph₃PAu)₃NPPh₃]²⁺ in low yield as well as the cluster cation [(Ph₃PAu)₈]²⁺ as the main product. The phosphoraneiminato complex crystallizes from CH₂Cl₂ with [PF₆]^? ions as [(Ph₃PAu)₃NPPh₃][PF₆]₂·CH₂Cl₂ in the triclinic space group with a = 1200.8(1), b = 1495.6(2), 2053.5(5), α = 86.97(2)°, β = 82.79(1)°, γ = 81.87(2)°, and Z = 2. The phosphoraneiminato ligand bridges through its N atom three Au atoms, which itself are connected to each other by weak aurophilic interactions.