Cobalt oxide supported gold nanoparticles as a stable and readily-prepared precursor for the in situ generation of cobalt carbonyl like species

A treatment of cobalt oxide supported gold nanoparticles (Au/Co₃O₄) under syngas atmosphere effectively generated a cobalt carbonyl-like active species in the reaction vessel. The preparation of Au/Co₃O₄ was quite simple and the in situ generated cobalt species could be used as a stable and easy handling alternative for dicobalt octacarbonyl without bothersome purification prior to use. The reactions, which are sensitive to the purity of the dicobalt octacarbonyl, such as the alkoxycarbonylation of epoxides and the Pauson-Khand reaction, smoothly progressed with Au/Co₃O₄.     

Amphiphilic block copolymer-stabilized gold nanoparticles for aerobic oxidation of alcohols in aqueous solution

Stable Au nanoparticles in P123 aqueous solution using a simple method have been developed and the colloidal Au nanoparticles were successfully applied for the effective oxidation of various alcohols using molecular O(2) as oxidant at 30 degrees C in aqueous solution.     

Synthesis of well‐defined,soluble poly(3‐alkyl‐4‐benzamide) by chain‐growth condensation polymerization

Well‐defined poly(3‐alkyl‐4‐benzamide) was synthesized by means of chain‐growth condensation polymerization of phenyl 3‐octyl‐4‐(4‐octyloxybenzyl(OOB)amino)benzoate ( 1c ) from initiator 2 , followed by removal of the OOB groups on amide nitrogen of poly 1c . Polymerization of 1c with phenyl 4‐(trifluoromethyl)benzoate ( 2b ) in the presence of 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS) and LiCl in THF at ?10 °C gave poly 1c with a narrow molecular weight distribution (M_w/M_n ≤ 1.08) and a well‐defined molecular weight (M_n = 4480–12,700) determined by the feed ratio of monomer to initiator (from 10 to 30). The OOB groups of poly 1c were removed with H₂SO₄ to give the corresponding N‐unsubstituted poly(p‐benzamide) (poly 1c′ ) with low polydispersity. The solublity of poly 1c′ in polar organic solvents was dramatically higher than that of poly(p‐benzamide), demonstrating that introduction of an alkyl group on the aromatic ring is very effective for improving the solubility of poly(p‐benzamide). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 360–365     

Influence of the Coordination of Donor Solvent Molecules to 1,4,7,10-Tetramethyl-1,4,7,10- tetraazacyclododecanenickel(II) and Analogous Nickel(II) Complexes on Their Steric Factors

Coordination equilibrium constants (K _NiS) of some donor solvent molecules to 1,4,7,10-tetramethyl-1,4,7,10-tetraazacyclododecanenickel(II) ([Ni(Me₄[12]aneN₄)]²⁺) were determined in nitrobenzene (a noncoordinating bulk solvent). The first (K _NiS1) and second stepwise coordination equilibrium constants (K _NiS2) for 1,4,7,10-tetraazacyclododecanenickel(II) ([Ni([12]aneN₄)]²⁺), 1,4,8,11-tetraazac yclotetradecane- nickel(II) ([Ni([14] aneN₄)]²⁺), 1,4,8,11-tetrathiacyclotetra-decanenickel(II) ([Ni([14]aneS₄)]²⁺) were also reinvestigated. The K _NiS values for [Ni(Me₄[12]aneN₄)]²⁺ were compared to those of [Ni([12]aneN₄)]²⁺, (1R,4S, 8R,11S)-1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecanenickel(II) (R,S,R,S-[Ni(Me₄[14]aneN₄)]²⁺), R,R,S,S-[Ni(Me₄[14]aneN₄)]²⁺, [Ni([14]aneN₄)]²⁺, and [Ni([14]aneS₄)]²⁺. Coordination of pyridine (Py), N,N,N′,N′-tetramethylurea (TMU), and N,N-dimethylacetamide (DMA) to [Ni(Me₄[12]aneN₄)]²⁺ was observed, although these donor solvent molecules did not coordinate to R,S,R,S-[Ni(Me₄[14]aneN₄)]²⁺. The K _NiS values for Py, TMU, and DMA are 7.9, 2.8, and 9.0 dm³⋅mol⁻¹, respectively. Some hydrogen-bonding waters were coordinated to R,S,R,S-[Ni(Me₄[14]aneN₄)]²⁺, but such waters did not coordinate to [Ni(Me₄[12] aneN₄)]²⁺. Also, the K _NiS2 values were larger than the corresponding K _NiS1 values for [Ni([14]aneS₄)]²⁺. Furthermore, the K _NiS1 values for [Ni([12]aneN₄)]²⁺ were the largest among these nickel(II) complex cations. The K _NiS, K _NiS1, and K _NiS2 values are discussed in terms of properties of the donor solvents and steric strains of these nickel(II) complex cations.     

Adsorption of microstructured particles at liquid-liquid interfaces

The solid particles are adsorbed at interfaces and form self-assembled structures when the particles have suitable wettability to both liquids. Here, we show theoretically how the microstructure on the particle surface affects their adsorption properties. The physical properties of the interface adsorbing a particle will be described by taking into account the surface roughness due to the microstructure. The microstructure on the surface changes drastically the wettability and the equilibrium position of the adsorbed particle. Therefore, the contact angle of the particle at the three-phase contact line shifts with the particle surface area, because the surface roughness enhances the interfacial properties of the particle surface. Moreover, the range of the interfacial tensions at which the particle is adsorbed becomes narrower with the increase of the surface roughness. The effect of the particle shape on the adsorption properties is also studied. In the case of disk-shaped particles, the energy changes discontinuously when the plane surface of the particle contacts the liquid-liquid interface. The adsorbing position does not change with the surface roughness. The orientation of a parallelepiped particle at the liquid-liquid interface is governed by the aspect ratio and the surface area of the particle. On the other hand, the particle which is partially covered with the microstructured surface is adsorbed firmly at the interface in an oriented state. We should consider not only the interfacial tensions but also the surface structure and the particle shape to control the adsorption behavior of the particle.     

Syntheses of new model compounds related to an antigenic epitope from Bupleurum falcatum L. and their distributions in various ganglioside-phospholipid monolayers

6-N-[2-(Tetradecyl)hexadecanamido]hexyl beta-D-glucopyranosyluronic acid-(1-->6)-beta-D-galactopyranosyl-(1-->6)-beta-D-galactopyranoside (1) and its clustering compound (2) carrying a tetravalent sugar unit, which are new model compounds related to a major antigenic epitope from antiulcer pectic polysaccharide of Bupleurum falcatum L., were synthesized and the distributions of 1 and 2 in mixed ganglioside (GM1, GD1a or GT1b)/phospholipid (DPPC) monolayers were observed using atomic force microscopy (AFM). AFM images showed that 1 was distributed in the GM1, GD1a and GT1b region of the mixed monolayers, in which 1 was miscible with GD1a. Specific distribution of 1 was observed in the mixed GM1/DPPC monolayer. Compound 2 was miscible with GM1, while 2 formed associations with GD1a and GT1b in the mixed monolayers. The distribution mode of 1 and 2 was different among the mixed ganglioside/DPPC monolayers.     

Chemical reaction-inspired crystal growth of a coordination polymer toward morphology design and control

This paper reports a novel crystal growth system of a coordination framework {[Cu3(CN)3{hat-(CN)3(OEt)3}]}n (1) (hat-(CN)3(OEt)3 = 2,6,10-tricyano-3,7,11-triethoxy-1,4,5,8,9,12-hexaazatriphenylene). The coordination polymer is crystallized through the reaction of 2,3,6,7,10,11-hexacyano-1,4,5,8,9,12-hexaazatriphenylene (hat-(CN)6), ethanol, and copper(I) complex, involving the breaking and forming of covalent bonds. The crystal morphologies obtained in the present system contain dumbbells, cogwheels, and superlattices. Moreover, in the growth perpendicular to the c-axis, periodic ramification at regular interval is observed, affording superlattice morphologies. Observation of the growth of dumbbell crystals shows that the growth rates parallel and perpendicular to the crystallographic c-axis are quite different: the former shows a drastic change with the reaction duration, while the latter is almost constant. These results are reproduced as a simple reaction-diffusion system, indicating that chemical reactions on crystal surfaces play an important role in determining the macroscopic crystal morphologies.     

A self-contained polymeric 2-DE chip system for rapid and easy analysis

We developed a polymeric 2-DE chip system. The chip consisted of an IEF region, an SDS-PAGE region, a valveless connection port, and a sample introduction port. A "junction structure" as a valveless connection port, which allowed separating and connecting the first- and second-dimensional gels, was fabricated between their regions. A "solution inlet" as a sample introduction port was fabricated to perform the liquid and sample introductions without solution leakage. Simultaneous sample monitoring was performed using the on-chip detection system. The performances of the system were demonstrated using commercially available proteins as a standard specimen and tissue-extracted proteins as the real samples. All procedures were employed without any movement of relocation part. This new 2-D separation system realized improved labor-intensive operations and a reduced experimental time.     

Cation-pi interaction in the polyolefin cyclization cascade uncovered by incorporating unnatural amino acids into the catalytic sites of squalene cyclase

It has been assumed that the pi-electrons of aromatic residues in the catalytic sites of triterpene cyclases stabilize the cationic intermediates formed during the polycyclization cascade of squalene or oxidosqualene, but no definitive experimental evidence has been given. To validate this cation-pi interaction, natural and unnatural aromatic amino acids were site-specifically incorporated into squalene-hopene cyclase (SHC) from Alicyclobacillus acidocaldarius and the kinetic data of the mutants were compared with that of the wild-type SHC. The catalytic sites of Phe365 and Phe605 were substituted with O-methyltyrosine, tyrosine, and tryptophan, which have higher cation-pi binding energies than phenylalanine. These replacements actually increased the SHC activity at low temperature, but decreased the activity at high temperature, as compared with the wild-type SHC. This decreased activity is due to the disorganization of the protein architecture caused by the introduction of the amino acids more bulky than phenylalanine. Then, mono-, di-, and trifluorophenylalanines were incorporated at positions 365 and 605; these amino acids reduce cation-pi binding energies but have van der Waals radii similar to that of phenylalanine. The activities of the SHC variants with fluorophenylalanines were found to be inversely proportional to the number of the fluorine atoms on the aromatic ring and clearly correlated with the cation-pi binding energies of the ring moiety. No serious structural alteration was observed for these variants even at high temperature. These results unambiguously show that the pi-electron density of residues 365 and 605 has a crucial role for the efficient polycyclization reaction by SHC. This is the first report to demonstrate experimentally the involvement of cation-pi interaction in triterpene biosynthesis.