Synthesis and magnetic properties of heterometal cyclic tetranuclear complexes [Cu(II)LM(II)(hfac)]2 (M(II) = Zn,Cu, Ni,Co, Fe,Mn; H3L = 1-(2-hydroxybenzamido)-2-((2-hydroxy-3-methoxybenzylidene)amino)ethane; Hhfac = hexafluoroacetylacetone)

A series of heterometal cyclic tetranuclear complexes [Cu(II)LM(II)(hfac)](2) (M(II) = Zn (1), Cu (2), Ni (3), Co (4), Fe(5), and Mn (6)) have been synthesized by the assembly reaction of K[CuL] and [M(II)(hfac)(2)(H(2)O)(2)] with a 1:1 mole ratio in methanol, where H(3)L = 1-(2-hydroxybenzamido)-2-((2-hydroxy-3-methoxybenzylidene)amino)ethane and Hhfac = hexafluoroacetylacetone. The crystal structures of 2, 4, and [Cu(II)LMn(II)(acac)](2) (6a) (Hacac = acetylacetone) were determined by single-crystal X-ray analyses. Each complex has a cyclic tetranuclear Cu(II)(2)M(II)(2) structure, in which the Cu(II) complex functions as a "bridging ligand complex", and the Cu(II) and M(II) ions are alternately arrayed. One side of the planar Cu(II) complex coordinates to one M(II) ion at the two phenoxo and the methoxy oxygen atoms, and the opposite side of the Cu(II) complex coordinates to another M(II) ion at the amido oxygen atom. The temperature-dependent magnetic susceptibilities revealed spin states of S(M) = 0, 1/2, 1, 3/2, 2, and 5/2 for the Zn(II), Cu(II), Ni(II), Co(II), Fe(II), and Mn(II) ions, respectively. Satisfactory fittings to the observed magnetic susceptibility data were obtained by assuming a rectangular arrangement with two different g-factors for the Cu(II) and M(II) ions, two different isotropic magnetic exchange interactions, J(1) and J(2), between the Cu(II) and M(II) ions, and a zero-field splitting term for the M(II) ion. In all cases, the antiferromagnetic coupling constants were found for both exchange interactions suggesting nonzero spin ground states with S(T) = 2/S(M) - S(Cu)/, which were confirmed by the analysis of the field-dependent magnetization measurements.     

Synthesis to determine the absolute configuration of (−)-pyricuol, a phytotoxin isolated from rice blast disease fungus Magnaporthe grisea

The absolute configuration of (−)-pyricuol, a phytotoxin isolated from rice blast disease fungus Magnaporthe grisea, was determined to be R by synthetic studies.     

Substituent effect on the formation of organically-modified silicate-phosphate alternating copolymer through nonaqueous acid–base reaction

Organically-modified silicate-phosphate and silicate-phosphite copolymers were prepared through nonaqueous acid–base reaction. The inductive effect of the organic substituent of the starting materials such as organically-modified chlorosilane and phosphorous acid on the acid–base reaction was investigated by ³¹P NMR measurement and ab initio molecular orbital calculation. The condensation reaction takes place by nucleophilic addition of phosphate ion (or phosphite ion) to chlorosilane through S_N2 mechanism to form silicate-phosphate (or phosphite) network. The reactivity of the acid–base pair can be controlled by changing the inductive effect of the organic substituents on the starting materials.     

Radical mediated stereoselective synthesis of (4R,8R)-4,8-dimethyldecanal, an aggregation pheromone of Tribolium flour beetles

(4R,8R)-4,8-Dimethyldecanal, a common aggregation pheromone of Tribolium flour beetles, has been synthesized from (R)-2,3-O-isopropylideneglyceraldehyde in 11 steps and 7% overall yield. The key step in the synthesis is the highly diastereoselective chelation-controlled radical reaction of ethyl (4S,5R)-4-benzyloxy-5,6-(isopropylidenedioxy)-2-methylenehexanoate with ethyl (R)-5-iodo-3-methylpentanoate performed in the presence of 7 equiv of MgBr₂·OEt₂.     

Hydrophilic polymer-immobilized lipoamides-iron(II) system as a new reducing catalyst for the reduction of O-benzylhydroxylamine by sodium borohydride

Based on a redox function of 1,2-dithiolane ? 1,3-dithiol, lipoamide immobilized on hydrophilic polymers such as polyacrylamide, polyethyleneimine, and chitosan was found to work as polymeric reducing catalysts for the reduction of O-benzylhydroxylamine to benzyl alcohol and ammonia with sodium borohydride in the presence of ferrous ion. These polymers were easily separable and maintained high reactivities even after repeated uses.     

Hydrolysis and polycondensation of acid-catalyzed Phenyltriethoxysilane (PhTES)

The effects of acid catalyst, water content and reaction temperature on the hydrolysis and polycondensation of phenyltriethoxysilane (PhTES) were studied using ²⁹Si NMR spectroscopy. The sol catalyzed by hydrochloric acid showed the simultaneous progress of hydrolysis and polycondensation. In addition, the reaction rate was almost independent of reaction temperature. On the other hand, the polycondensation in the PhTES-derived sol mixed with an excess amount of water and acetic acid as a catalyst proceeded after completion of the hydrolysis. In the acetic acid-catalyzed system, the degree of the hydrolysis and polycondensation largely depends on the reaction temperature.     

Polycondensation of bis(p-nitrophenyl) β-truxinate with diamine

Model reaction of bis(4-nitrophenyl) β-truxinate (BNPT) with aliphatic amines proceeded quantitatively at room temperature. Accordingly, polycondensation of BNPT with various diamines was carried out at room temperature or 80°C. During the polycondensation of BNPT with diamines, the precipitation of polymer or the observed gelation of polymerization solution occurred, which may limit the molecular weight of the polymer. On the other hand, the reaction of BNPT with 1,3-(4-piperidyl)propane (DPP) proceeded homogeneously to give the polymer with relatively high molecular weight, and the obtained polyamide (P-1e) showed excellent solubility in many solvents. The study of TG and DTA indicated that the obtained polymers were stable at lower temperature than around 270°C. The polymer prepared from the polycondensation of BNPT with hexamethylenediamine showed melting point and decomposition due to the imidation at 282°C. The photochemical reaction of these polymers was carried out in the film state. The irradiation of 254 nm light caused an absorption at 272 nm to appear and the molecular weight to decrease. This meant that the scission of cyclobutane ring in the main chain occurred to give cinnamamide structures. Also, the absorption at 272 nm decreased by the irradiation of 302.5 nm light. However, the UV spectrum of irradiated polymer did not agree with that of the original polymer. These results suggested that the dimerization of the resulting cinnamamide moieties occurred in the competition of their trans–cis-isomerization. On the other hand, the rate of scission of cyclobutane ring of P-1e was faster than that of the corresponding polyamide containing α-truxillamide structure.     

Analysis of sugar phosphates in plants by ion chromatography on a titanium dioxide column with pulsed amperometric detection

This paper describes the development of a practical method for the analysis of sugar phosphates from the model higher plant Arabidopsis thaliana by high-performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD). The extraction method of sugar phosphates from higher plants was first optimized for HPAEC-PAD analysis. In order to improve the resolution in HPAEC-PAD, a column packed with titanium dioxide resin was used. The titanium dioxide column was used as a trap-column for sugar phosphates and nucleotides, for the removal of sample matrices. Sample pretreatment was achieved in-line and automatically using a six-port valve placed after the injection valve.     

High dispersion and fluorescence of anthracene doped in polyphenylsiloxane films

Phenylsilsesquioxane-diphenylsiloxane glass thick films doped with anthracene were prepared from homogeneous coating sols obtained from two different approaches. One approach consisted in incorporating the dye during the glass preparation (which implies the incorporation of the dye in an aqueous media). The doped-glass was further dissolved in the solvents mixture composed of cyclohexane and acetone. The other approach which is non-aqueous consisted simply in dissolving directly the preformed non-doped polyphenylsiloxane glass in the dye solutions. The stability of the organic-inorganic hybrid glass matrix in most organic solvents makes possible the incorporation of the dye without problems of miscibility and dispersion in the hybrid matrix. The coating was performed at room temperature using spin-coating technique prior to further heat-treatment. Crack-free and homogeneous films of high optical quality were obtained. The optical properties of the doped films based on their absorption and emission spectra were discussed owing the incorporation route of the dye. The results showed that the non-aqueous approach used to incorporate the dye minimizes the dye aggregation. This property associated to the preparation route permits to obtain optically active hybrid films loaded with high concentrations of anthracene (in the order of 10⁻² M) which enhance the fluorescence of the doped films. The hybrid doped-films obtained represent therefore a tremendous potential for applications in the field of optics and photonics including the development of new nonlinear optical materials. Bouzid Menaa and Masahide Takahashi both the author contributed equally.     

Steric-control for the enantioselective hydrolysis of amino acid esters in hybrid membrane systems

The enantioselective hydrolysis of the amino acid esters, p-nitrophenyl-N-dodecanoyl-D(L)-phenylalaninates (C(12)-D(L)-Phe-PNP) catalyzed by active tripeptide, N-(benzyloxycarbonyl)-L-phenylalanyl-L-histidyl-L-leucine (Z-PheHisLeu) in the presence of coaggregates (hybrid membranes) composed of native phospholipid, L-alpha-dimyristoylphosphatidylcholine (DMPC) and nonionic surfactant, polyoxyethylene (8) lauryl ether (C(12)(EO)(8)) was easily controlled by regulating the reaction temperature and changing the composition of coaggregates. Furthermore, excellent correlations were observed between the enantioselectivity in the hydrolysis of C(12)-D(L)-Phe-PNP catalyzed by Z-PheHisLeu in the presence of coaggregates and physical properties of hybrid membranes. It is assumed that catalytic activities of tripeptide catalyst in hybrid membranes should be regulated by changing the microenvironments of reaction fields.