Third- and fourth-order perturbation corrections to excitation energies from configuration interaction singles

Complete third-order and partial fourth-order Rayleigh-Schrodinger perturbation corrections to excitation energies from configuration interaction singles (CIS) have been derived and termed CIS(3) and CIS(4)(P). They have been implemented by the automated system TENSOR CONTRACTION ENGINE into parallel-execution programs taking advantage of spin, spatial, and index permutation symmetries and applicable to closed- and open-shell molecules. The consistent use of factorization, first introduced by Head-Gordon et al. in the second-order correction to CIS denoted CIS(D), has reduced the computational cost of CIS(3) and CIS(4)(P) from O(n(8)) and O(n(6)) to O(n(6)) and O(n(5)), respectively, with n being the number of orbitals. It has also guaranteed the size extensivity of excited-state energies of these methods, which are in turn the sum of size-intensive excitation energies and the ground-state energies from the standard M?ller-Plesset perturbation theory at the respective orders. The series CIS(D), CIS(3), and CIS(4)(P) are usually monotonically convergent at values close to the accurate results predicted by coupled-cluster singles and doubles (CCSD) with a small fraction of computational costs of CCSD for predominantly singly excited states characterized by a 90%-100% overlap between the CIS and CCSD wave functions. When the overlap is smaller, the perturbation theory is incapable of adequately accounting for the mixing of the CIS states through higher-than-singles sectors of the Hamiltonian matrix, resulting in wildly oscillating series with often very large errors in CIS(4)(P). Hence, CIS(3) and CIS(4)(P) have a rather small radius of convergence and a limited range of applicability, but within that range they can be an inexpensive alternative to CCSD.     

Interactions of water-soluble polymers with small molecules II: Poly(2-diethylaminoethyl methacrylate)-methyl orange and its homolog systems at different temperatures

In order to investigate the interactions of poly(2-diethylaminoethyl methacrylate) (PDEAEMA) with methyl orange and its homologs in solution, temperature dependence of the complex formation has been examined in detail by the measurements of transmittance and specific conductance for the systems. Furthermore, the binding course of dyes to PDEAEMA has been studied on the basis of thermodynamic parameters obtained from equilibrium dialysis experiments at different temperatures. It was observed that the flocculation process shifted to lower dye concentrations in accordance with increasing hydrophobicity of the dyes in the order, methyl orange < ethyl orange < butyl orange, and the process of complex formation was characterized by three separate regions according to the slope of specific conductivity-mixing ratio curve for mixtures of PDEAEMA and dye. The temperature dependences of F,H and S suggest that, for dyes-PDEAEMA complex formation, the hydrophobic interaction is predominant at a low temperature but the electrostatic interaction becomes important as the temperature increases.     

Effect of interpolymer complex formation on bioadhesive property and drug release phenomenon of compressed tablet consisting of chitosan and sodium hyaluronate

The bioadhesion property of tablets consisting of chitosan (CS) and sodium hyaluronate (HA) was investigated using a lyophilized porcine dermis as a model of mucous membrane. Release phenomena of brilliant blue FCF (BBL) from the CS-HA tablets were also studied. BBL was employed as a model compound of water-soluble drugs. Strong adhesion forces were observed when the tablets were prepared from HA alone or a physical mixture of CS and HA. The adhesion of CS tablets was also obtained but it was rather weak. No effect of pH values in the media was observed on the adhesion force in these tablets. On the other hand, the release rate of BBL from CS-HA tablets was greatly affected by the change of the polymer mixing ratio, suggesting a possible interaction between CS and HA in the tablet following water penetration into the tablet.     

Diffusion coefficients of positronium in polycarbonate at low temperatures

Diffusion coefficients of positronium (Ps) in polycarbonate (PC) have been determined at temperatures between 20 and 300 K by means of positron lifetime spectroscopy. 2,2-dinitrobiphenyl (DNB) was added to the polymer as a Ps quencher and the diffusion coefficients were determined from measured Ps quenching rate constants, assuming that the reaction between Ps and DNB is completely diffusion-controlled.     

Partial molar volume of proteins studied by the three-dimensional reference interaction site model theory

The three-dimensional reference interaction site model (3D-RISM) theory is applied to the analysis of hydration effects on the partial molar volume of proteins. For the native structure of some proteins, the partial molar volume is decomposed into geometric and hydration contributions using the 3D-RISM theory combined with the geometric volume calculation. The hydration contributions are correlated with the surface properties of the protein. The thermal volume, which is the volume of voids around the protein induced by the thermal fluctuation of water molecules, is directly proportional to the accessible surface area of the protein. The interaction volume, which is the contribution of electrostatic interactions between the protein and water molecules, is apparently governed by the charged atomic groups on the protein surface. The polar atomic groups do not make any contribution to the interaction volume. The volume differences between low- and high-pressure structures of lysozyme are also analyzed by the present method.     

On-line column preconcentration for the determination of cobalt in sea water by flow-injection chemiluminescence detection

A flow-injection method for the determination of dissolved cobalt(II) in sea water has been studied based on a combination of column preconcentration using 8-quinolinol immobilized on silica gel, fluoride containing metal alkoxide glass (8HQ-MAF) and chemiluminescence detection with a gallic acid-hydrogen peroxide system. Co(II) is selectively recovered from an acidified sample with 8-quinolinol immobilized on silica gel. After elution with dilute hydrochloric acid the resultant eluent is mixed with the reagent solutions, heated to 60^°C and then introduced into the CL cell. The analysis time including the 2-min sample load was 8 min per sea water sample with a corresponding detection limit of 0.62 ngl^-1 (3). The average standard deviation calculated for 10 replicate measurements of artificial sea water samples with a concentration of 10 ngl^-1 cobalt was ±2.1%. The method has been tested with the standard reference sea waters NASS and CASS.     

Determination of rare earth elements in seawater by on-line column preconcentration inductively coupled plasma mass spectrometry

A home made column of commercially available iminodiacetate resin, Muromac A-1 (50–100 mesh) was used to concentrate rare earth elements (REEs) (15 elements: Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu) in seawater. An automated low pressure flow analysis method with on-line column preconcentration/inductively coupled plasma mass spectrometry (ICP-MS) is described for the determination of REEs in seawater. Sample solutions (adjusted to pH of 3.0) passed through the column. After washing the column with water, the adsorbed elements were subsequently eluted into the plasma with 0.7 M nitric acid. Calibration curves were accomplished by means of purified artificial seawater with a sample loading time of 120 s. Detection limits (DLs) of the on-line column preconcentration/ICP-MS by eight replicate operations were between 0.040 and 0.251 pg ml⁻¹ for REEs in the artificial seawater. The precision was less than 8.9% for REEs and one sample can be processed in 7 min using a 7 ml of sample. The proposed method was applied to determine REEs in coastal seawater of Hiroshima Bay, Japan.     

Charge separation versus recombination in dye-sensitized nanocrystalline solar cells: the minimization of kinetic redundancy

In this paper we focus upon the electron injection dynamics in complete dye-sensitized nanocrystalline metal oxide solar cells (DSSCs). Electron injection dynamics are studied by transient absorption and emission studies of DSSCs and correlated with device photovoltaic performance and charge recombination dynamics. We find that the electron injection dynamics are dependent upon the composition of the redox electrolyte employed in the device. In a device with an electrolyte composition yielding optimum photovoltaic device efficiency, electron injection kinetics exhibit a half time of 150 ps. This half time is 20 times slower than that for control dye-sensitized films covered in inert organic liquids. This retardation is shown to result from the influence of the electrolyte upon the conduction band energetics of the TiO2 electrode. We conclude that optimum DSSC device performance is obtained when the charge separation kinetics are just fast enough to compete successfully with the dye excited-state decay. These conditions allow a high injection yield while minimizing interfacial charge recombination losses, thereby minimizing "kinetic redundancy" in the device. We show furthermore that the nonexponential nature of the injection dynamics can be simulated by a simple inhomogeneous disorder model and discuss the relevance of our findings to the optimization of both dye-sensitized and polymer based photovoltaic devices.     

Isolation of lignan glucosides and neolignan sulfate from the leaves of Glochidion zeylanicum (Gaertn) A. Juss

Six lignan and neolignan derivatives (1-6) were isolated from the n-BuOH-soluble fraction of a MeOH extract of the leaves of Glochidion zeylanicum. On the basis of spectral data, their structures were elucidated to be (+)-isolarisiresinol 3a-O-beta-glucopyranoside (1), dihydrodehydrodiconiferyl alcohol 4-, 9- and 9'-O-beta-D-glucopyranosides (2-4, respectively), (+)-isolarisiresinol 2a-O-beta-D-glucopyranoside (5), and dihydrodehydrodiconiferyl alcohol 9-O-sulfate (6), and 5 and 6 were new compounds.